summaryrefslogtreecommitdiff
path: root/resources/scripts/update
AgeCommit message (Collapse)Author
2023-08-19consolidate u-boot/seabios/coreboot build scriptsLeah Rowe
See file: resources/scripts/build/defconfig/for It is based on: resources/scripts/build/payload/u-boot The u-boot payload script has been deleted, as has the seabios payload script; the build/boot/roms logic has been heavily simplified too, by removing the logic for building of elf files based on defconfig. SeaBIOS, U-Boot and coreboot all use defconfig-type infrastructure for their build systems, and they are fundamentally the *same* in how to compile each codebase, at least in an lbmk context, regardless of actual (and very huge) differences in these codebases. Several hundred sources-lines of code have been eliminated by this change, drastically simplifying everything; U-Boot payload compiling also now errors out when a single build fails, instead of continuing. Also: build/boot/roms no longer re-compiles a coreboot target that was already compiled, which is the same behaviour observed for payloads. (this means you must now manually delete a target, when you wish to re-build it; the build/boot/roms logic now more or less just runs cbfstool; blobutil is handled from build/defconfig/for) ALSO: Since crossgcc is now handled by build/defconfig/for, not build/boot/roms, standalone compiling of u-boot is now possible. This has been tested. You compile it like so: ./build defconfig for u-boot or specific trees, e.g. ./build defconfig for u-boot default One other consequence of this patch is that re-building the same ROM image is now much faster, because the same builds are re-used unless deleted. This could be useful when testing grub.cfg changes, for example, if that's all you change. With things like ccache used (not yet used robustly in lbmk), this could speed things up more, depending on the codebase. This patch demonstrates the raw power of lbmk; it is a very simple and highly efficient build system, and now much more so! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-17don't call blobutil directly from lbmkLeah Rowe
it's bloat, and was only there for backwards compatibility with the old commands, but the new commands are e.g. ./update blobs inject instead of: ./blobutil inject this results in a slight code size reduction in lbmk Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-17remove download scripts, consolidate into scriptLeah Rowe
most of them were just calling the gitclone script, so remove them. the grub script was treating gnulib as a dependency. i've now added the ability to grab 1 dependency, in the gitclone script (it should be expanded later to support multiple dependencies) the gitclone script has been renamed to "fetch". the "fetch_trees" script does more or less the same thing, but calls "fetch" and handles multiple revisions if a project needs that this is more efficient, and slightly reduces the code size of lbmk! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-17improve user feedback in blobutilLeah Rowe
make it output messages that tell the user important information. it's only subtle but it makes a difference to some people, who need confirmation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-16merge coreboot/u-boot download logic to one scriptLeah Rowe
they are fundamentally the same, in an lbmk context. they are downloaded in the same way, and compiled in the same way! (Kconfig infrastructure, board-specific code, the way submodules are used in git, etc) ~200 sloc reduction in resources/scripts the audit begins Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-14NEW BOARD: HP EliteBook 8470p (Intel GPU)Leah Rowe
Intel GPU! The AMD ones will be tested, but assume Intel-only for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-14NEW BOARD: Dell Precision T1650Leah Rowe
Very nice ivybridge board that supports ECC RAM. NOTE: I couldn't get onboard graphics working yet, but this was confirmed working with a graphics card (in my case nvidia quadra k420) booted in text mode on the SeaBIOS payload. The GRUB payload also works, when loaded from SeaBIOS. Therefore, this is a SeaBIOS-only board (as far as first payload is concerned), but you can pick GRUB from the menu. You could make it "GRUB-only" in practise by setting SeaBIOS boot order to only load GRUB, and disable the SeaBIOS menu. We refer to this as "SeaGRUB". I've made lbmk use biosutilities and uefiextract, to get at the SMSC SCH5545 Environmental Control (EC) firmware. This firmware is needed for fan control. This is automatically downloaded and extracted, from Dell UEFI firmware updates. As with other blobs such as Intel ME, this firmware is then scrubbed by the release build scripts. The blobutil "inject" script can be used to re-insert it. Of note: there is no fixed offset, but no other blobs to be inserted in CBFS either, so the offset when re-inserting on release ROMs should still be the same, and thus the ROM checksums should match, when running blobutil inject. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-09NEW BOARD: HP EliteBook 2170pLeah Rowe
Another ivybridge platform, added in coreboot recently. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-05blobs/download: save ME file to correct locationLeah Rowe
blobdir is incorrect, and it means that the directory will appear under blobs/, in this case. this was an oversight on my part. this behaviour did not break anything in practise, but this patch makes the behaviour more consistent with rules. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-05blobs/download: try backup if bad hash on mainLeah Rowe
At present, the logic only tries backup URLs when an actual download fails (bad internet connection or the server is down). If the main download succeeds, but it has a bad checksum, the backup download is not attempted. Since wrongly hashed files are to be assumed useless, we may aswell delete and try the next file. This will guard against the possibility of a vendor changing their file, without changing the file name (non-versioned files, for example, may be subject to such changes). Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-05blobs/download: support more formats on ME extractLeah Rowe
ME extraction didn't support unar (RAR format), for regular extraction, after downloading a vendor file. For bruteforce ME extraction, after extracting a vendor archive, unar(RAR) and inno(innoextract) was not supported. This patch fixes both issues. It should be noted that as of now, the unar method has only been tested with certain HP vendor updates, and it's currently not used on any of those. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29blobs/download: declare full user agentLeah Rowe
I messed up the string, when I first did this. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29blobs/download: properly handle backup/main urlLeah Rowe
Immediately after the last revision, which was a hacky workaround to the problem, I realised the actual problem, and the real solution: In the switch block, check *backup* first. Then it breaks, continuing on the iteration. If it's variable for a main URL, it'll reliably go to the next check in the block, whereas if it's backup, it'll default to the first one in each case. This bug has been annoying the sh*t out of me for ages, and I've finally nailed it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29blobs/download: don't download backup on mainLeah Rowe
The script was actually downloading the backup, at all times, for each given URL. The way we handle this is quite buggy. This patch is a workaround, a dirty hack in fact, but it will do for now, because our backup URLs are always wayback links where the original URL (matching the correct main URL in the sources file) is always present, in the URL. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29blobs/download: set common user agent stringLeah Rowe
Make it look like a normal web browser, downloading files. Some HTTP servers might block Wget unless this is done. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29blobs/download: simplify for loopLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-29scripts: fix indentation in switch/case blocksLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-07-27blobutil/ec: abort if kbc1126 ec extraction failsLeah Rowe
This was an oversight on my part. Should extraction fail, we must abort. This is in preparation for addition of future mainboards, where further tweaking is required in blobutil. This error check will warn us about it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-24run coreboot utils from own directoryLeah Rowe
this means coreboot can now be distcleaned safely, before and after each build of a rom image Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-20blobs/download: exit if no board configs foundLeah Rowe
fixes ./build boot roms all in detect_firmware(), "set" is used to get values from configs, to know if things like ME/MRC are needed on some "board" configs under resources/coreboot/, no actual coreboot configs are provided, because they are used as a reference (coreboot revision, tree name etc) for actual boards, with actual coreboot configs when attempting to build for such a board, running "set" on such non-existent files would cause a non-zero exit, when we want zero. the non-zero exit then caused the build/boot/roms command to fail, when running "all" if it found, for example, resources/coreboot/cros/ which has the above problem, in this context work around it by verifying that coreboot configs exist for the given target name, in the blobutil download script. if no such configs exist, then exit zero (success) doing so is correct, because the script is intended to do just that, erroring only if it is detected that blobs are needed for a given board, but other errors occur; if no coreboot configs exist, then no roms will be built and, therefore, no blobs are needed Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-17Cache downloads based on checksumRiku Viitanen
Since many boards use the same ME firmware, we could save everyone's bandwidth and time by caching the update files. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-06-13Revert "Remove most of Ferass's lbmk contributions"Leah Rowe
This reverts commit a4ea2867319471d9fe7d4ee540881e0286b4d3cf. The licensing audit has been abandoned. I will not be re-licensing in bulk to MIT. I can still use MIT license on new works, e.g. utilities, but there's really no pressing need to re-license lbmk. It's just shell scripts, and most of what it interacts with (coreboot, grub, seabios) is GPL anyway. So who cares? Ferass's patch was removed due to refusal to re-license, but the decision to re-license has been canceled. I'm now aiming for a quick stable release.
2023-05-27blobutil: merge with main scriptLeah Rowe
make blobutil a symlink. Example of command changes: ./blobutil download x220_8mb is now: ./update blobs download x220_8mb The old command still works, for compatibility. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-27unify download/build scriptsLeah Rowe
move resources/scripts/download/ to: resources/scripts/update/module/ This: ./download coreboot Is now: ./update module coreboot However, running "./download coreboot" still works, via backwards compatibility. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-27Remove most of Ferass's lbmk contributionsLeah Rowe
The primary purpose of my intense auditing has been to improve lbmk's coding style and fix bugs but there is a secondary purpose: know precisely who owns what, because I want to re-license as much as possible of lbmk under *MIT*, instead of the current GNU licensing. MIT is vastly superior, because it grants *actual* freedom to the user, permits *sublicensing* and it is vastly more compatible with other GPL combinations; for example, MIT license is compatible with GPL2-only whereas lbmk's current mix of GPLv3-or-later and GPLv3-only is legally incompatible with GPLv2-only. Re-licensing under MIT will most likely result in more contributions to Libreboot's build system in the future, especially as it will attract a lot more commercial interest. Contrary to the popular arguments, copyleft is a liability to the free software movement and results in less code being written; in practise, permissively licensed code gets more public contributions, including from commercial entities, even if companies can theoretically make something proprietary out of it (in practise, anyone inclined can just use the upstream and proprietary forks almost always die). Copyleft propaganda is fundamentally flawed. See: <https://unixsheikh.com/articles/the-problems-with-the-gpl.html> Anyway, I've been doing a combination of: * Seeking permission from other copyright holders, for re-licensing * Deleting, or moving, other contributions; for example, splitting certain contributions into separate files so that originally modified files become unencumbered. This latter solution is a result of *code cleanup* arising from the audit. For Ferass's contributions, I opted to seek *permission*, and permission was denied. In full compliance with this legal imperative, I'm acting accordingly; this commit removes all of Ferass's changes that converted lbmk to posix shell scripts, thus removing his copyright on the affected files, bypassing his authority entirely. Therefore, lbmk is largely now bash-dependent. In practise, nobody is going to use anything other than a GNU system to build Libreboot, because many projects that Libreboot makes use of rely heavily on GNU; for example, coreboot's build system makes heavy use of GNU-specific extensions in *GNU Make*, and likely contains many bashisms. Of course, Libreboot also compiles GNU GRUB. I would much rather have MIT-licensed Bash scripts than GPL-licensed posix SCL scripts. This reverts the changes from Ferass El Hafidi, for the following commits, with some exceptions: * 7f5dfebf7d37c56d9c7993aaa17c59070cb5aec9 * f787044642236917c9c4dbcaa48a6b0648097db0 Exception: download/mrc not reverted, because that was already a fork of an existing script under coreboot's build system, and their script was GPLv2. i cannot/will not re-license this file (ergo, 7f5dfebf7d37c56d9c7993aaa17c59070cb5aec9 change remains intact, on this file) resources/scripts/build/boot/roms_helper, these changes have been kept: * 7e6691e9 - Add ARMv7 and AArch64 support * dec2d720 - add myself in the build/roms_helper script (added 2021 copyright for the change below) * b7405656 - Workaround for grub's slow boot ^ these changes will be re-factored, splitting them out of the file into a new file. This will be done in a future lbmk revision. (in some cases, it makes sense to keep a change but split it, allowing the main file to be re-licensed without the change in it) This is part of a much larger series of licensing audits. It's likely that lbmk will be posix-compliant (in its shell scripts) again some day, because I'm planning to rewrite most of these scripts (the ones modified in this patch), and many of them (e.g. individual download scripts) are subject to future deletion in a planned overhaul of the download logic for third party projects. In addition: these changes are being kept (no attempt to re-license them will be made): * cff081c6 - Fix grub's slow boot (1 year, 5 months ago) <Vitali64> * 4c851889 - Add macbook*1 16mb configs (1 year, 6 months ago) <Vitali64> Ferass's work that remains will be split into dedicated files containing them, where feasible. In the case of grub.cfg (for GNU GRUB), I don't care because it's a script for an engine (GRUB shell) that's under GPL anyway, so who really cares about MIT license. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-14update/coreboot: top-down coding styleLeah Rowe
also moved hardcoded strings into variables
2022-12-27Do not rely on bashisms and behaviour undefined by the POSIX specification.Ferass 'Vitali64' EL HAFIDI
By making lbmk fully POSIX-compliant, it will be easier to port lbmk to other systems implementing POSIX such as Alpine Linux and FreeBSD. Signed-off-by: Ferass 'Vitali64' EL HAFIDI <vitali64pmemail@protonmail.com>
2022-11-14pragmatic system distribution guideline compliancepsdgLeah Rowe
osboot is now part of libreboot, and will soon shut down. libreboot now conforms to osboot policy.
2022-08-28scripts: Add helpers to modify and update U-Boot configsAlper Nebi Yasak
These are almost verbatim copies of coreboot versions, but using 'u-boot' instead of 'coreboot' and 'ub*' instead of 'cb*'. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2021-11-22update coreboot and nuke tianocore20211122Leah Rowe
tianocore is a liability for the libreboot project. it's a bloated mess, and unreliable, broken on many boards, and basically impossible to audit. i don't trust tianocore, so i'm removing it.
2021-06-03replace #!/bin/bash with #!/usr/bin/env bashRon Nazarov
2021-05-18libreboot!Leah Rowe
this is forked from the "libre" branch in osboot, which is itself a libre, deblobbed fork of osboot, a blobbed up fork of libreboot libreboot needed to be purged clean. this is the new libreboot development repository. the old one has been abandoned