| Age | Commit message (Collapse) | Author |
|---|
|
the "board" variable in prepare_new_coreboot_tree()
is also declared in fetch_coreboot_trees
for the one in prepare_new_coreboot_tree, it's passed
as an argument to the function, so give it a new name
i learned that some shells have a global scope, when
using variables of the same name between functions
|
|
this should download all trees:
./download coreboot
without this patch, it doesn't
with this patch, it works
i overlooked this during earlier
refactoring. auditing revealed it.
|
|
top-down order, and *still* rfc 3676 compliant
i finished simplifying the logic, and
i split everything into smaller functions
there is still more more polishing to do
final touches will be done in new revisions
|
|
coreboot trees/patching is still handled
specifically by "./download coreboot"
command now available in lbmk:
./gitclone coreboot
this *only* creates the directory at:
coreboot/coreboot
this directory is never used in builds.
it is only used by download/coreboot to
create patched trees for each mainboard
|
|
|
|
|
|
|
|
|
|
i'm going to move the config recursion check
into a separate function, and global variables
make it easier to handle
|
|
|
|
|
|
this fixes a regression caused in previous (recent)
revisions. this script is a beast, and requires a
lot of taming, which is the purpose of my audit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
main first
usage last
|
|
|
|
|
|
yes, i know 3676 supersedes 2646
i still say 2646
saying 2646 is still technically valid,
for my purposes
|
|
|
|
the cbfstool command within subshell now also
exits with non-zero status, if it fails (most
likely because extraction failed, for some reason,
of the coreboot rom image for running through it)
|
|
the previous code merely exited from the subshell,
but the intended behaviour is for the entire script
to halt execution, and exit with non-zero status.
this patch fixes that bug.
|
|
top-down order for all logic, and shorter code lines,
conforming to rfc 2646 (no more than 80 characters)
the 80-character rule is violated for variables containing
long strings, such as wayback machine urls (can't be helped)
a few bugs were discovered, which will be fixed in follow-up
revisions, such as:
* exit status not handled inside subshell
* in general, exit status should be handled
more explicitly, rather than relying on -e
|
|
for our purposes, grub and gnulib are one in the same
if one fails, both have failed
exit with non-zero status if gnulib fails
the script sets -e so it will fail if grub fails to
download, which is tried before gnulib, and if that
happens, the grub directory is not created
|
|
|
|
don't download it. keep it in lbmk.
libreboot moved to codeberg for git hosting,
and i didn't want to keep lugging around an
extra git repo just for one tiny project.
|
|
libre mrc on haswell is quite buggy for now, but works in
a limited fashion
this patch re-adds the old configs, but as _mrc for example
t440p_12mb_mrc instead of t440p_12mb
and t440p_12mb (without _mrc) still uses the libre mrc code
|
|
courtesy of Angel Pons from the coreboot project
this uses the following patch set from gerrit, as yet
unmerged (in coreboot master) on this date:
https://review.coreboot.org/c/coreboot/+/64198/5
logic for downloading mrc blobs has been deleted from
lbmk, as this is now completely obsolete (for haswell
boards)
if other platforms are added later that need mrc.bin,
then logic will be re-added again for that
|
|
this fixes the build error:
Error: name not set
Usage: ./download gitmodule [name]
when running:
./download all
running "all" runs all scripts under downloads,
one of which was the gitmodule script itself, therefore
being run without argument
|
|
|
|
Part 2
Signed-off-by: Ferass 'Vitali64' EL HAFIDI <vitali64pmemail@protonmail.com>
|
|
The U-Boot download script does its work from the repository root
instead going into the newly created dirs, unlike the coreboot
counterpart. It should run the board-specific extra.sh files with the
downloaded paths as their working directory. Do so by a subshell.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The no-argument form of the U-Boot download script prepare trees for all
boards when run with no arguments, like the corresponding script for
coreboot. The usage text for this case was removed without any changes
to the corresponding code, assume it was by mistake and add it back.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Removing the git dirs was part of deblobbing, which Libreboot no longer
cares about. The variable that triggers it is no more. Remove the dead
code.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
|
|
|
|
osboot is now part of libreboot, and will soon shut down.
libreboot now conforms to osboot policy.
|
|
Downloading coreboot and U-Boot takes quite the disk space and bandwith.
We don't need to download entire repos, only the revisions that we are
interested in.
Use the --depth=1 option to only download the files we need. Since the
initial clones may not have our target revision, always try to fetch it.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Keeping the git repositories is useful while development, e.g. to avoid
git cloning repositories over and over again while debugging download
scripts. Setting the NODELETE environment variable keeps the blobs and
the git repositories. Allow a slightly finer-tuned version of this where
we can keep only the git-related files by setting the variable to "git".
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The coreboot download removes .git folders as they still contain the
removed blobs, remove those in the U-Boot version as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Although it's unlikely, boards might want to run extra commands after
the board-specific U-Boot directories are prepared. Copy the existing
mechanism for that from the coreboot download script to the U-Boot one.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Boards may need different sets of patches to be applied to their U-Boot
builds, copy the existing mechanism from the coreboot download script to
the U-Boot download script.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The coreboot download script tries to update submodules, since coreboot
does use git submodules to retrieve and compile the projects it depends
on. Although U-Boot doesn't use submodules, try to update them anyway to
match the coreboot download script.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The coreboot download script uses GitHub as a fallback if the upstream
coreboot is unavailable, use a similar fallback for U-Boot as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Boards may want to specify a board-specific U-Boot revision. At the very
least, pseudo-boards for u-boot-libre releases will need to specify their
U-Boot versions somehow.
Copy the existing mechanism from download/coreboot for specifying
build info with board.cfg files. Specify the commit hash for the
'v2021.07' pseudo-board, and 'master' as the default.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The U-Boot download script is designed to help with releasing
u-boot-libre and it can only prepare a generic U-Boot v2021.07 tree.
However, we will need to build board-specific versions of U-Boot to be
able to use it as a coreboot payload effectively.
As a first step toward that, make the download script prepare per-board
copies of U-Boot v2021.07. Then, add a 'v2021.07' pseudo-board for the
u-boot-libre release script to work on.
The u-boot-libre deblob script hash ends up chaning due to copying my
author attribution from the download script, update its hash.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
