Age | Commit message (Collapse) | Author |
|
This adds coreboot configuration for the HP Chromebook 14 G3, which is
based on the "google/nyan_blaze" mainboard in upstream coreboot. It uses
the shared tree for the "nyan" baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=4
CONFIG_BOARD_GOOGLE_NYAN_BLAZE=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_DRIVERS_AS3722_RTC_BUS=4
CONFIG_DRIVERS_AS3722_RTC_ADDR=0x40
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have the nyan blaze chromebook.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the Acer Chromebook 13 (CB5-311,
C810), which is based on the "google/nyan_big" mainboard in upstream
coreboot. Also adds a shared "nyan" board directory to share with
others having the same baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=4
CONFIG_BOARD_GOOGLE_NYAN_BIG=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_DRIVERS_AS3722_RTC_BUS=4
CONFIG_DRIVERS_AS3722_RTC_ADDR=0x40
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have the nyan big chromebook.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the ASUS Chromebit CS10, which is
based on the "google/veyron_mickey" mainboard in upstream coreboot. It
uses the shared tree for the "veyron" baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOARD_GOOGLE_VEYRON_MICKEY=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have the veyron mickey chromebit.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for a few white-label chromebooks which
are based on the "google/veyron" mainboard in upstream coreboot. It uses
the shared tree for the "veyron" baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOARD_GOOGLE_VEYRON_JERRY=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have any of the veyron jerry chromebooks.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the ASUS Chromebook Flip C100PA,
which is based on the "google/veyron" mainboard in upstream coreboot. It
uses the shared tree for the "veyron" baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOARD_GOOGLE_VEYRON_MINNIE=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have the veyron minnie chromebook.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the ASUS Chromebook C201PA, which
is based on the "google/veyron" mainboard in upstream coreboot. Also
adds a shared "veyron" board directory to share with others having the
same baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x400000
CONFIG_BOARD_GOOGLE_VEYRON_SPEEDY=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
Untested since I don't have the veyron speedy chromebook.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the ASUS Chromebook Flip C101,
which is based on the "google/gru" mainboard in upstream coreboot. It
uses the shared tree for the "gru" baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x00800000
CONFIG_BOARD_GOOGLE_BOB=y
CONFIG_DRIVER_TPM_SPI_BUS=0x0
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_PAYLOAD_FIT_SUPPORT=y
Untested since I don't have the bob chromebook.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
This adds coreboot configuration for the Samsung Chromebook Plus (v1),
which is based on the "google/gru" mainboard in upstream coreboot. Also
adds a shared "gru" board directory to share with others having the same
baseboard.
The config is based on the following defconfig:
# CONFIG_USE_BLOBS is not set
CONFIG_VENDOR_GOOGLE=y
CONFIG_CBFS_SIZE=0x00800000
CONFIG_BOARD_GOOGLE_KEVIN=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_UART_PCI_ADDR=0x0
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_PAYLOAD_FIT_SUPPORT=y
Most things work, but one significant problem is that the board can't power
off properly. It also happens with my manual U-Boot-only builds, but not
when I manually build coreboot with a U-Boot payload. Not sure why it is
happening here as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
with this change, it's unlikely we'll hit errors again. previously,
some projects used were calling "python" which in context was
python3, but on some setups, the user only has python2 and python3
but no symlink for "python" (which if exists, we assumed linked to
python3)
now it's unambiguous. docs/build/ can probably be updated now, as
a result of this change, to remove the advice about that
|
|
on ga-g41m-es2l, set it to ata
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coreboot is enabling PECI on these CPUs which, according to Intel erratum, must
only be done after loading microcode updates, otherwise the CPUID feature set
becomes corrupted. That's my understanding, and I think this is why SpeedStep
is broken. To be specific, it could but but operating systems no longer detect
that the feature is supported. In any case, belgin on IRC found the commit in
coreboot, after a bisect, enabling PECI. This commit in Libreboot adds a patch,
reverting coreboot's PECI patch.
|
|
tianocore is a liability for the libreboot project. it's a bloated mess, and
unreliable, broken on many boards, and basically impossible to audit.
i don't trust tianocore, so i'm removing it.
|
|
|
|
|
|
you must de-solder the default chip and install the new one.
winbond w25q128fvsig is a nice choice of 16MB (128Mbit) IC
|
|
|
|
4mb and 8mb users can just pad their roms to 16mb, using the instructions on
<https://libreboot.org/faq.html#how-do-i-pad-a-rom-before-flashing>
maintaining them in lbmk is a waste of time, and also a hazard because it's a
lot of duplicated labour when making any changes, which could result in awful
mistakes being made
|
|
|
|
|
|
See:
<https://lists.nongnu.org/archive/html/libreboot/2016-08/msg00063.html>
This enables all SATA ports, allowing full T400s compatibility. T400s already
works just fine, when flashing a T400 ROM, but not all SATA ports were usable.
The specific patch is here:
<https://lists.nongnu.org/archive/html/libreboot/2016-08/txtgT_L8DC94R.txt>
There was also this patch, which coreboot actually adapted upstream:
<https://lists.nongnu.org/archive/html/libreboot/2016-08/txtMXyws85Q_P.txt>
Yes, this patch was submitted in 2016. I overlooked it, during all this time.
|
|
mitigate missing characters in unifont for border/arrow characters. this saves
space because now it is no longer necessary to add a custom font
the background added has the libreboot logo on it, and it's 10kb in size unlike
the old gnulove background that was hundreds of KB
|
|
These option ROMs are known to cause a system hang. If you insert an empty
option ROM into CBFS, it disables any option ROM loading for those devices
when using SeaBIOS.
|
|
improved battery life on macbook21
|
|
|
|
This fixes issue 3:
https://notabug.org/libreboot/lbmk/issues/3
In this issue, GM45 laptops such as X200/T400 will hang on reboot (normal boot
works, and shutting down works too).
|
|
similar to x200
|
|
|
|
|
|
|
|
libgfxinit_txtmode with seabios only
|
|
For add-on GPU, use one of the SeaBIOS images.
|
|
Use seabios ROM if you want to use an add-on GPU.
seabios_withgrub and seabios_grubfirst are also available.
|
|
SeaBIOS should fit nicely, now that memtest is disabled
|
|
2MiB and 16MiB were the only flash sizes supported. 4 and 8MiB have been
added.
Now there are only libgfxinit_txtmode configs.
Use seabios_withgrub or seabios_grubfirst ROMs if you wish to use an add-on
GPU.
|
|
this is forked from the "libre" branch in osboot, which is itself a libre,
deblobbed fork of osboot, a blobbed up fork of libreboot
libreboot needed to be purged clean. this is the new libreboot development
repository. the old one has been abandoned
|