summaryrefslogtreecommitdiff
path: root/resources/coreboot
AgeCommit message (Collapse)Author
2023-03-17nuke p2b_ls/p3b_f boardsLeah Rowe
they don't even boot in pcbox properly, and the real hardware is not much to talk about useless port delete
2023-03-05also fix data.vbt path for lenovo/w541Leah Rowe
using the same method as the previous patch for t440p
2023-03-05Fix CONFIG_INTEL_GMA_VBT_FILE for the t440p_12mb configKonstantinos Koukopoulos
2023-03-04ICH9M: default to 256MB VRAM, not 352MBLeah Rowe
352MB VRAM causes stability issues, according to some reports users can still set it to the higher level when building, if they wish to
2023-02-19fix bad ifdtool patch from earlier commitLeah Rowe
2023-02-19coreboot: update revision of cbtree "default"Leah Rowe
2023-01-26x230edp_12mb: Correct the path to data.vbtAlexei Sorokin
2022-12-14disable grub and memtest on 1MB ROM configslbmkplaceholder
due to upstream bloat, these no longer fit. it will have to be fixed in the next libreboot release
2022-12-14fix ./build boot roms alllbmkplaceholder
2022-12-11p2b_ls/p3b_f boards: Disable memtest payloadLeah Rowe
memtest can't fit in such tiny space alongside SeaBIOS
2022-12-11p2b_ls/p3b_f boards: no payload and no vga initLeah Rowe
The configs were enabling SeaBIOS payload, but this is to be handled by lbmk, not coreboot. Further, they were enabling VGA ROM execution in coreboot, but this should be handled by SeaBIOS. This board should not have a GRUB payload enabled either; this will be checked and fixed if necessary in the next commit.
2022-12-11Merge branch 'master' of qeeg/lbmk into masterLeah Rowe
2022-12-10Add P2B-LS and P3B-F configsqeeg
2022-12-10coreboot: Add qemu_arm64_12mb boardAlper Nebi Yasak
Add a build for QEMU AArch64 virtual machine using U-Boot as payload. Coreboot config is based on the following defconfig: CONFIG_CBFS_SIZE=0x00c00000 CONFIG_BOARD_EMULATION_QEMU_AARCH64=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_COREBOOT_ROMSIZE_KB_12288=y CONFIG_UART_PCI_ADDR=0x0 The resulting ROM can be booted with a command line like: qemu-system-aarch64 \ -machine virt,secure=on,virtualization=on \ -cpu cortex-a53 -m 1G \ -vga none -display none -serial stdio \ -bios bin/qemu_arm64_12mb/uboot_*.rom However, this is little more than a proof of concept because U-Boot upstream is missing coreboot integration on non-x86 boards, which could have been useful for e.g. a framebuffer. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10coreboot: qemu_x86_12mb: Enable DRIVERS_UART_8250IOAlper Nebi Yasak
U-Boot doesn't run on this board when this SuperIO serial driver is disabled. Enable it. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add qemu_x86_12mb buildAlper Nebi Yasak
Add a U-Boot build for the qemu_x86_12mb board. The config is a copy of the upstream "coreboot" defconfig, but with OF_EMBED=y. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-04coreboot/default: add --nuke flag to ifdtoolLeah Rowe
e.g. ./ifdtool --nuke me coreboot.rom this will be used by rom release build scripts, to scrub stuff like intel me from the rom
2022-11-29coreboot: hide MEI on neutered-ME targetsAlexei Sorokin
2022-11-29Merge branch 'master' of Arsen/lbmk into masterLeah Rowe
2022-11-28t430_12mb: Add, based on x230_12mbArsen Arsenović
These boards are near-identical, this appears to suffice.
2022-11-28coreboot: add x230edp_12mb, remove x230fhd_12mbAlexei Sorokin
New x230edp_12mb target uses the https://review.coreboot.org/c/coreboot/+/28950 patchset to add an X230_EDP target to the default coreboot branch. Consequently the "fhd" coreboot branch is no longer needed and has been safely removed.
2022-11-24Merge branch 'qemu' of shmalebx9/lbmk into masterLeah Rowe
2022-11-19added x86 qemu board based on x230 coreboot configshmalebx9
2022-11-19remove duplicate patch causing build errorLeah Rowe
2022-11-19also fix crossgcc on cros/fhd coreboot treesLeah Rowe
2022-11-19cros devices: use a common coreboot treeLeah Rowe
2022-11-19remove kfsn4-dre, kcma-d8 and kgpe-d16Leah Rowe
buggy, buggy, buggy, buggy, buggy, buggy, buggy full of bugs, these boards never worked properly. i got ripped off with these. now i'm ripping off the band aid use dasharo if you want d16 stuff. i'm done with it.
2022-11-19fix gnat build issue on coreboot repositoriesLeah Rowe
backported from newer coreboot revisions, see patch coreboot/default/patches/0014-coreboot-default-fix-crossgcc-build.patch
2022-11-14pragmatic system distribution guideline compliancepsdgLeah Rowe
osboot is now part of libreboot, and will soon shut down. libreboot now conforms to osboot policy.
2022-08-29coreboot: Add peach pit chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the Samsung Chromebook 2 11", which is based on the "google/peach_pit" mainboard in upstream coreboot. Also adds a shared "peach" board directory to share with others having the same baseboard. The config is based on the following defconfig: CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x00400000 CONFIG_UART_FOR_CONSOLE=3 CONFIG_BOARD_GOOGLE_PEACH_PIT=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the peach pit chromebook. This also fails without a non-free 3rdparty/blobs/cpu/samsung/exynos5420/bl1.bin blob. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add spring chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the HP Chromebook 11 G1, which is part of the "google/daisy" mainboard in upstream coreboot. It uses the shared tree for the "daisy" baseboard. The config is based on the following defconfig: CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x00400000 CONFIG_UART_FOR_CONSOLE=3 CONFIG_BOARD_GOOGLE_DAISY=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_EC_GOOGLE_CHROMEEC_I2C_BUS=0x4 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the spring chromebook. This also fails without a non-free 3rdparty/blobs/cpu/samsung/exynos5250/bl1.bin blob. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add snow chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the Samsung Chromebook - XE303, which is based on the "google/daisy" mainboard in upstream coreboot. Also adds a shared "daisy" board directory to share with others having the same baseboard. The config is based on the following defconfig: CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x00400000 CONFIG_UART_FOR_CONSOLE=3 CONFIG_BOARD_GOOGLE_DAISY=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_EC_GOOGLE_CHROMEEC_I2C_BUS=0x4 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the snow chromebook. This also fails without a non-free 3rdparty/blobs/cpu/samsung/exynos5250/bl1.bin blob. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add nyan blaze chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the HP Chromebook 14 G3, which is based on the "google/nyan_blaze" mainboard in upstream coreboot. It uses the shared tree for the "nyan" baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=4 CONFIG_BOARD_GOOGLE_NYAN_BLAZE=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_DRIVERS_AS3722_RTC_BUS=4 CONFIG_DRIVERS_AS3722_RTC_ADDR=0x40 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the nyan blaze chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add nyan big chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the Acer Chromebook 13 (CB5-311, C810), which is based on the "google/nyan_big" mainboard in upstream coreboot. Also adds a shared "nyan" board directory to share with others having the same baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=4 CONFIG_BOARD_GOOGLE_NYAN_BIG=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_DRIVERS_AS3722_RTC_BUS=4 CONFIG_DRIVERS_AS3722_RTC_ADDR=0x40 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the nyan big chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add veyron mickey chromebit configsAlper Nebi Yasak
This adds coreboot configuration for the ASUS Chromebit CS10, which is based on the "google/veyron_mickey" mainboard in upstream coreboot. It uses the shared tree for the "veyron" baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOARD_GOOGLE_VEYRON_MICKEY=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the veyron mickey chromebit. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add veyron jerry chromebook configsAlper Nebi Yasak
This adds coreboot configuration for a few white-label chromebooks which are based on the "google/veyron" mainboard in upstream coreboot. It uses the shared tree for the "veyron" baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOARD_GOOGLE_VEYRON_JERRY=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have any of the veyron jerry chromebooks. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add veyron minnie chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the ASUS Chromebook Flip C100PA, which is based on the "google/veyron" mainboard in upstream coreboot. It uses the shared tree for the "veyron" baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOARD_GOOGLE_VEYRON_MINNIE=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the veyron minnie chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add veyron speedy chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the ASUS Chromebook C201PA, which is based on the "google/veyron" mainboard in upstream coreboot. Also adds a shared "veyron" board directory to share with others having the same baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x400000 CONFIG_BOARD_GOOGLE_VEYRON_SPEEDY=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 Untested since I don't have the veyron speedy chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add bob chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the ASUS Chromebook Flip C101, which is based on the "google/gru" mainboard in upstream coreboot. It uses the shared tree for the "gru" baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x00800000 CONFIG_BOARD_GOOGLE_BOB=y CONFIG_DRIVER_TPM_SPI_BUS=0x0 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 CONFIG_PAYLOAD_FIT_SUPPORT=y Untested since I don't have the bob chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29coreboot: Add kevin chromebook configsAlper Nebi Yasak
This adds coreboot configuration for the Samsung Chromebook Plus (v1), which is based on the "google/gru" mainboard in upstream coreboot. Also adds a shared "gru" board directory to share with others having the same baseboard. The config is based on the following defconfig: # CONFIG_USE_BLOBS is not set CONFIG_VENDOR_GOOGLE=y CONFIG_CBFS_SIZE=0x00800000 CONFIG_BOARD_GOOGLE_KEVIN=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_UART_PCI_ADDR=0x0 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000 CONFIG_PAYLOAD_FIT_SUPPORT=y Most things work, but one significant problem is that the board can't power off properly. It also happens with my manual U-Boot-only builds, but not when I manually build coreboot with a U-Boot payload. Not sure why it is happening here as well. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-13specifically call python3, in scriptsLeah Rowe
with this change, it's unlikely we'll hit errors again. previously, some projects used were calling "python" which in context was python3, but on some setups, the user only has python2 and python3 but no symlink for "python" (which if exists, we assumed linked to python3) now it's unambiguous. docs/build/ can probably be updated now, as a result of this change, to remove the advice about that
2021-12-29coreboot/*: set grub_scan_disk to ahci on most boardsLeah Rowe
on ga-g41m-es2l, set it to ata
2021-12-29apple/macbook21: set grub_scan_disk to ahciLeah Rowe
2021-12-20lenovo/r400: disable death beepsLeah Rowe
2021-12-11coreboot configs: don't enable wifi during early initLeah Rowe
2021-12-11coreboot configs: disable serial output during coreboot initializationLeah Rowe
2021-12-07macbook21_16mb: always clear DRAM on regular bootLeah Rowe
2021-12-07Add macbook*1 16mb configsVitali64
2021-12-01Fix broken SpeedStep on GM45 laptops such as ThinkPad X200, T400, T500, W500Leah Rowe
Coreboot is enabling PECI on these CPUs which, according to Intel erratum, must only be done after loading microcode updates, otherwise the CPUID feature set becomes corrupted. That's my understanding, and I think this is why SpeedStep is broken. To be specific, it could but but operating systems no longer detect that the feature is supported. In any case, belgin on IRC found the commit in coreboot, after a bisect, enabling PECI. This commit in Libreboot adds a patch, reverting coreboot's PECI patch.
2021-11-22update coreboot and nuke tianocore20211122Leah Rowe
tianocore is a liability for the libreboot project. it's a bloated mess, and unreliable, broken on many boards, and basically impossible to audit. i don't trust tianocore, so i'm removing it.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-09 16:43:58 +0000