| Age | Commit message (Collapse) | Author |
|---|
|
we don't need these anymore, because we now know
whether or not the lock file exists in these cases.
this is because child/parent instance determination
is now done based on the presence of that file, rather
than how TMPDIR is set; and TMPDIR is now set accordingly,
via more robust logic as in previous patching.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this makes xbmk_set_env easier to read
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it is extremely unlikely to occur, but this patch reduces
the likelihood even further. that unlikely occurance is:
when creating a TMPDIR, it's possible that it was already
created before. this is OK on child instances, where that
is the intended behaviour (unified TMPDIR), but not for
parent instances.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we previously checked whether xbmk was running a child
instance, based on the initialisation of TMPDIR, but
this relied on unreliable string substitutions, which
could not be made inherently reliable. there were also
no checks on whether the given TMPDIR, even if correct,
was a directory or whether it was a symlink; there were
also no checks on whether it changed.
now with this change, child instances are detected by
the presence of the lock file. the parent instance
writes the generated TMPDIR location in that file, and
this is checked again in the child instance, to ensure
that the TMPDIR didn't change; it also errors out if
the TMPDIR doesn't exist or if it is a symlink.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
for the grep command, we must ensure that errors are
suppressed *BEFORE* outputting to a file. depending
on the sh implementation, the previous code might
have begun outputting to a file before suppressing
errors.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
too many chained commands. break it out a bit.
this makes it more readable, without changing behaviour.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the output to a file also has its own error handling,
but x_ can be used safely to provide additional assurance
that the script will break if an error occurs.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
group related operations together, without whitespace.
declare all variables at the start of the function.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
instead, create a file indicating that a given xgcc
target had already been built successfully, within a
given coreboot tree.
this will considerably speed up the building of release
archives, especially when there are a lot of boards.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
if e.g. elf/coreboot/default/w500_16mb contains readied
images from before, crossgcc is still being checked.
if you already built all the coreboot images, and wanted
to just modify all the payloads for example, this would
result in a much slower re-build process, because it is
needlessly re-checking crossgcc every time.
by doing it this way, we need up the testing of payloads
quite considerably, during xbmk development.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
instead of copying to a temp file and then
concatenating with padding back to the main
file, we concatenate and create the temp file,
then move the temp file back to the main file.
this is because cat can be quite error prone,
more so than mv, so this will reduce the chance
of corrupt files being left behind depending
on the context (of course, the latter is often
avoided due to xbmk's design, which emphasises
use of temporary files first).
this matches the same design used in the function
unpad_one_byte, which creates the deconcatenated
output in a temporary file first, moving it back.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The current logic deletes old project files e.g. sources,
but *after* updating the project hash.
This means that if a deletion fails, and the directory
is still there (e.g. src/coreboot/default/) afterward, it's
now a tainted archive, yet the hash has been updated, so
subsequent runs of the build system will cause unknown
errors.
This patch fixes that, by first copying the new hash to
a temporary file. *Then*, deletions are handled, and the
final hash file is updated afterward.
The code is now a bit more bloated as a result, but this will
reduce the risk of tainted sources being handled under fault
conditions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
since it's the name, e.g. "default", referring to a
project tree (in this example, coreboot/default).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
since it's only ever used as a directory name
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
now the code that uses it makes a bit more sense
to the casual reader.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the new function names make the comments redundant. the
code is now self-explanatory.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in that case, the previous tree-wide check will cover
it, so the current logic wastes computational time.
this patch therefore somewhat optimises the code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the target/project hash checks are basically identical,
so let's unify them under a single function.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This fixes the following error on ./mk release:
cp: cannot stat 'elf/coreboot/default/d510mo/libgfxinit_txtmode/coreboot.rom': No such file or directory
I recently re-wrote the handling of coreboot images, and
I overlooked this entirely. When a given target specifies
release=n, it has to be skipped, so builds are not done.
The "release" variable is already checked, in mkcoreboottar.
Let's also put it in the other mkhelper functions, to make sure
there are no errors.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This fixes a build error when doing ./mk release, after
a regression caused by the last few commits.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This was a problem when I did it before, because individual
target builds weren't automatically re-compiled when needed.
The recent design improvements in lbmk enable this to be
done again.
Cached images in elf/ have no payloads, so they are a liability,
therefore they are padded by one byte to prevent flashing. This
solves the problem that the previous caching had.
With this change, modifying payloads can be tested without
needing to re-build coreboot each time.
The cached coreboot builds are also automatically re-built when
needed, which is another improvement this time, compared to
the last time coreboot builds were cached in this manner.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Detect when a config changes. This is done even if the
entire tree doesn't change.
This is already done per-tree if files change, but
individual project files don't change.
For example, if a grub.cfg changes, the given cached
build for that GRUB tree isn't deleted. Same thing if
a given U-Boot config doesn't change.
This patch fixes a longstanding design flaw of lbmk,
making auto-re-builds more reliable. This complements
another recent change, that deletes all target builds
of a given tree when the tree changes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Target builds go inside a common directory for
the given tree now, which gets deleted, thus
deleting all target builds of that given tree.
Therefore, the deletion being removed is redundant.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as opposed to target/
for example:
image the command:
./mk -b u-boot amd64coreboot
This would put the U-Boot binaries here:
elf/u-boot/amd64coreboot/default/
With this change, they now go here:
elf/u-boot/x86_64/amd64coreboot/default/
This solves a problem that existed previously, where
you could modify a given tree in a multi-tree project,
but cached builds for targets branching separately off
of each tree would not be deleted, and thus not re-built.
This accomplishes such a result, without needing to
further check hashes of individual targets.
The latter will still be done, in a future change, because
this change doesn't fix another problem:
If you change a given config, e.g. targetname "foo" which
uses tree "bar", elf/foo/ would not be removed automatically
for re-build.
So this change only deletes individual target builds when
their master tree changes.
Where the target and tree are the same, this also means
elf/tree/target/
for example: seabios/default would create binaries in:
elf/seabios/default/default/
not:
elf/seabios/default/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's 2019-2025 now, not 2019-2024, because i recently imported
new pcsx-redux upstream changes that go up to June 2025.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it means nothing here. in context, if a non-zero return
is observed, we should not do anything here, which is
already the behaviour anyway, except that "break" means
nothing since we're not in a loop here.
where an error exit should be observed, x_ is used inside
the command given for fx_
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
handle errors on sha512sum - also handle awk errors inside
the mini subshell, and provide overall error handling.
we know that the project.hash file should always exist, and
always be read no matter what; technically, the find command
that proceeds it might not yield any results, but an empty
file would then be produced.
the edge case of an empty file would have lead to an error
beforehand, when configuring the project in function,
configure_project(), so we've already got that covered.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when reading old_pjhash, we need to error out where a read
error occurs. such an error is unlikely, but could occur under
certain edge cases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Don't do no-op if it fails; fall back to "clean" instead,
and fail if that fails.
The no-op was there was not all projects have distclean,
but we do intend for them all to be cleaned.
We mitigate further error by only running make-clean if
a makefile exists.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i overlooked this one in the previous commit
there is always one.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
not elf/UTIL/TREE
This way, they are automatically deleted when a tree
has to be re-built.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Don't copy the files directly, because we might be doing
this from a work directory that has no files; in this case,
generic "unknown" variables are used, without generating
any files, so the current logic would produce an error.
However, we do need to create those dot files, because
we then rely on them for building release binaries.
The new logic maintains current behaviour, while fixing
this technical edge-case scenario via mitigation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
shorten them
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
stick it in git_prep, which both single- and multi-tree
projects will use, when downloading git repositories.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The following execution will result in another printf
that says exactly what is being downloaded.
There is no need to inform the user twice about
what is being downloaded.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
A git-pull is performed immediately after git-fetch.
Git-pull already performs git-fetch as a prerequisite.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the checks at the end of the function are mostly
superfluous, because bad_checksum() is immediately
called just beforehand, and performs the same checks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the current behaviour is a relic from the older lbmk
design, before recent auditing.
the current logic would cause xbmk to continue execution,
going into a child process with .git/ being a symlink.
The .git/ directory should never be a symlink, because
it is extremely error-prone.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We rely on a non-zero exit on other try_ commands, which
works fine there because we then check the file afterward
and error out accordingly.
For git repositories, we assume that both mirrors are
identical and therefore once we get to the first clone
attempt, we assume that it must succeed.
Therefore, if it does not succeed, we must fail. This fixes
a regression I found in testing, where sometimes a failed
patching attempt would not result in an error exit, and
would therefore result in broken sources being present.
In practise, I always very closely watch the terminal when
testing xbmk, especially when updating project patches, so
we probably didn't introduce any broken sources in practice.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
