| Age | Commit message (Collapse) | Author |
|---|
|
if the user ran this on an x60 tarball, the no-gbe
warning seems confusing since that one has intel gbe,
but pre-ifd, so no gbe region in the flash; on pre-ifd
systems e.g. ich7 southbridge, the mac address was baked
into a separate gbe nvm on mask rom, inaccessible to users
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
setcfg already checks it, but it's good to check anyway
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We already have code to handle this, but it's possible
that I might break it in the future, due to the complex
logic of this script.
So, I've implemented this catch-all check at the end of
the process. It still relies on the actual setting of
the variables, upon which this check is based, to be set
correctly.
This condition will most certainly never be met, unless
I break some other part of the code in the future. That
is precisely what this overly pedantic check is for.
Example scenarios:
I forget to set xchanged=y, on a new modification.
I set has_hashes erroneously.
The variables are re-used between runs, and not properly
reset; at present, a given run of ./mk inject only
operates on a single target, but this latter fact could
change in the future.
need_files is set erroneously; vendorfiles detected as
being required, when they aren't.
These are just a few examples. As such, this is a preventative
bug fix, because it's preventing a bug.
The main reason I want this i n here is because I need to ensure
that vendor files are properly deleted, for a given release.
If I accidentally includes ones that I'm not supposed to,
inside ROM images, that could be a big problem.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
forgot a line break, three times in a rowe
you got a problem with that?
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
because printf
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
where the nuke command is used, we need the files to be
there; if they're not, it will try to nuke them, which will result
in an error in most cases, but there may be some cases where that
isn't true, for instance if only the Intel ME is needed; it'll be
writing zeroes over zeroes.
we want to only allow technically correct behaviour, because
technically correct is the best kind of correct.
it is theoretically possible that a double-nuke might affect
certain behaviours unpredictably. for example, if vendor.sh
later integrates another tool that works whereby the same command
inserts or nukes depending on a certain condition, but with the
same command, and where that command would return zero in both
cases.
this is a preventative bug fix, because it fixes an issue that
does not yet actually occur in practise.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the user must be well-informed as to the next step, which
this script directly influences
guide the user accordingly
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The message at the end that states a file was
not modified, is not currently printed when vendor
files are not needed, and setmac is not used.
This patch fixes that, so the user now sees a
confirmation of such change, or lack thereof.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This is because the user may have specified setmac.
I tried without this change, on a fresh lbmk, setting
the MAC address on an X200 tarball, and it produced an
error that ifdtool was unavailable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Observe the following prior patch:
commit 818f3d630c268742cf046523e24c7b000e06ec69
Author: Leah Rowe <leah@libreboot.org>
Date: Fri Jan 3 17:06:14 2025 +0000
vendor.sh: Don't error if vcfg is unset
Now:
This patch made vendor inject more robust, and speeds
up the processing of images where no vendor files are
needed, but it broke setmac on such tar archives.
This new patch works around it. For example, I was
able to run ./mk inject on an X200 tarball to change
the MAC address; no vendorfiles are inserted, because
it's not needed.
The further check for whether a board uses Intel GbE
still protects against accidental modification.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, the user can't install python, which is
in the dependencies. an irony!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
there are some lbmk scripts that i modified, starting
this year. update the headers.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
It should return 1 instead, in readcfg(), because this
is not an error condition; vcfg not being set means
that the board doesn't use vendor files, which is
perfectly normal and should not yield an error.
This fixes a build error under certain conditions,
found during release-build testing.
This bug was exposed when I fixed double quoting issues
as per shellcheck tests.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This should be the proper fix now
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit ec6bcc1fba5fbdf8b19b3d1cf9711f3d4c9c3741.
|
|
it should fix more build errors that might have appeared
in the aforementioned revision, mentioned in the previous
commit message
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the bug was actually caused by chkvars
add an escape for the quotes and bam. fixed.
without this, i got the following e.g.
For command: ./mk dependencies debian
Output:
./mk: 1: [: apt-get: unexpected operator
ERROR ./mk: pkg_add unset
Someone reported a similar issue with the Arch one,
which is also now fixed. This regression was caused
by the previous commit:
commit 0cf58c22734b19293f4cbef83add59b031ca1773
Author: Leah Rowe <leah@libreboot.org>
Date: Thu Jan 2 23:52:45 2025 +0000
fix lbmk shellcheck errors
I forgot to escape the double quotes in an eval.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This check is a good idea, but not viable here,
because the modules naturally aren't set in all
circumstances, so it just causes a build error.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i also removed that printf, because the path it prints is
actually wrong sometimes; in the recent re-write of vendor.sh,
it prints the correct path instead
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
There was also a condition in run_make_command that is now
an OR, where it was an AND, on script/trees, to fix the use
of mixed (and erroneous) OR/AND operators.
I'm planning a much more invasive audit than this. These are
light fixes, intended for Libreboot 20241206 rev8.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i made modifications to them in 2025, so
update them to 2025
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Don't extract to bin/release/
Modify the tarball instead. Previously, the tarball would
not be modified, but a lot of users thought the tarball was
being modified and ignored bin/release/, where the injected
images were actually being saved to.
Don't copy the tarball either. Just modify it in-place.
Don't allow single-rom injection either; only allow the
tarball-based method.
The command syntax has changed, but:
./mk inject tarball.tar.xz
This is the same. What has changed is nuke, and MAC address
modification. Observe:
./mk inject tarball.tar.xz nuke
./mk inject tarball.tar.xz setmac
./mk inject tarball.tar.xz setmac ??:??:??:??:??:??
./mk inject tarball.tar.xz setmac 00:1f:16:??:22:aa
These are just a few examples. The MAC address syntax is
the same as used for nvmutil, which means you can set it
randomly. Also:
./mk inject tarball.tar.xz setmac
You can use the *setmac* command *repeatedly*, even if
you've already injected a given archive. It'll just
update the archive, but skip injecting other files
that were already injected.
If you use setmac without a MAC address, it will randomise
the MAC address. This is therefore very similar to the
command structure used in nvmutil.
The code for injection is generally more robust, with
stronger error checks. This design change was done, so
that the user doesn't accidentally brick their machine.
The non-injected images have a prefix in the file name
saying "DO_NOT_FLASH", and those non-injected images are
padded by 1 byte. That way, the user knows not to flash it
and if they try, flashprog will throw an error.
The prefix and padding is removed on injection. Old images
without the padding/prefix can still be injected, via
tarballs; this new code is backwards-compatible with tarballs
from older Libreboot releases.
A common thing I see sometimes is a user will say they have
a black screen or something, and I say: did you insert vendor
files? And they say yes. And they did. But they extracted and
flashed from the tarball, which wasn't injected, because
they didn't release about bin/release/
No amount of RTFM is justified. The previous design flaw
is a bug. We must always observe user safety first, no matter
what, so that has now been done.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I believed that the compressed nature of refcode was the only
non-reproducible thing, but turns out you also need to run
rmodtool on the refcode to make the binary relocatable in
cbfs. This is based on my reading of the coreboot Makefile.
With this change, I can now provide release binaries for
the HP EliteBook 820 G2.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
./mk dependencies debian --reinstall
Add --reinstall and it'll do:
apt-get install --reinstall
This can be useful when updating from a stable release
to a testing release. The variable, "reinstall" can be
configured for other distros, but it's currently only
configured for Debian-based distros.
Also, it can be anything. For example, you could add -y;
however, a 4th argument will not be accepted. For example,
you cannot do:
./mk dependencies debian --reinstall -y
If you do this, it'll only see --reinstall; similarly, if
you did this command:
./mk dependencies debian -y --reinstall
then -y would be passed, but not --reinstall. This is an
intentional design decision, in case you accidentally pasted
or subshelled something that outputted something undesirable,
to prevent possible abuse.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
When doing ./mk release, the build system would create
symlinks inside xbmkpath/ relative to the current work tree,
which will differ from what's in PATH.
Since XBMK_CACHE is already set globally, from the main work
tree and the release-build work tree, that means we can know
reliably that PATH is always correct if we put xbmkpath/
inside XBMK_CACHE.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
which is a non-standard command, whereas command is part of posix
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The code is simple enough now that I'm happy for it
to just be part of the main script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Remove all symlinks each time, to ensure that no
stragglers are left behind, since they are being
re-generated each time anyway.
The code for determining version numbers has now
been unified under gnu_setver()
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We were checking the shorthand version number, but
the precise version numbers need to match.
Also: when we searched $PATH/gnat-$gccver, we assumed
that the full version would then match, without checking
it, so now it is checked precisely.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
When doing e.g. $@ we should use double quotes to prevent globbing.
Thanks go to XRevan86 for pointing this out.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
When I tested Debian Trixie, and Debian Sid, I saw that
GCC in PATH pointed to gcc-14, but gnat in path pointed
to GNAT-13, even if you manually install gnat-14.
GNAT 14 was marked experimental, but GCC 14 was marked
for use, in the apt repositories.
So this patch doesn't address the mismatch when doing e.g.
apt-get install gcc gnat
I will address the actual package dependency in a follow-up
patch, on the Debian dependencies config.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Previously serprog_rp2040, but we now also support
the RP2530 boards.
Therefore, serprog_pico is a nice generic name. The
directory on release archives will now be serprog_pico
instead of serprog_rp2040; it will contain serprog images
for both RP2040 and RP2530 devices.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
he forgot to do this in the recently merged pico2
support. i'm doing it for him as a matter of courtesy.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
rp2040 and rp2530 platforms can't share a cmake build directory. we
could just delete the build directory after every compilation, but that
would be really wasteful (every tool would need to be recomiled every
time. instead create new build directories as new plaforms are found
and symlink them to the point where the build directory used to be.
to find out which platform we're compiling for, we crudely parse the
board headers file.
there surely would be better ways to do this, but this hack works
with all the boards in pico-sdk 2.1.0.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
set this variable in the tmpclone function. otherwise,
certain submodules might always download every time,
when handling multiple projects.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The Libreboot 20241206 release provided FSP pre-assembled
and inserted into the ROM images; the only file inserted
by vendor.sh was the Intel ME.
Direct distribution of an unmodified FSP image is permitted
by Intel, provided that the license notice is given among
other requirements. Due to how coreboot works, it must split
up the FSP into subcomponents, and adjust certain pointers
within the -M component (for raminit).
Such build-time modifications are perfectly fine in a coreboot
context, where it is expected that you are building from source.
The end result is simply what you use.
In a distribution such as Libreboot, where we provide pre-built
images, this becomes problematic. It's a technicality of the
license, and it seems that Intel themselves probably intended
for Libreboot to use the FSP this way anyway, since it is they
who seem to be the author of SplitFspBin.py, which is the
utility that coreboot uses for splitting up the FSP image.
Due to the technicality of the licensing, the FSP shall now
be scrubbed from releases, and re-inserted.
Coreboot was inserting the -S component with LZ4 compression,
which is bad news for ./mk inject beacuse the act of compression
is currently not reproducible. Therefore, coreboot has been
modified not to compress this section, and the inject command
doesn't compress it either. This means that the S file is using
about 180KB in flash, instead of about 140KB. This is totally OK.
The _fsp targets are retained, but set to release=n, because these
targets *still* don't scrub fsp.bin; if released, they would
include fsp files, so they've been set to release=n. These can
be used on older Libreboot release archives, for compatibility.
The new ROM images released for the affected machines are:
t480_vfsp_16mb
t480s_vfsp_16mb
dell3050micro_vfsp_16mb
Note the use of _vfsp instead of _fsp. These images are released,
unlike _fsp, and they lack fspm/fsps in the image. FSP S/M must
be inserted using ./mk inject.
This has been tested and confirmed to boot just fine.
The 20241206 images will be re-compiled and re-uploaded with this
and other recent changes, to make Libreboot 20241206 rev8.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use ./mk instead, because in a future change to lbmk,
only ./mk will be used and the other commands will
be removed.
with this change, the ./vendor, ./build and ./update
commands are no longer used. these commands still work,
for backwards compatibility, but they are deprecated.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
When vendor files were not needed on a given board,
the script would directly exit. This is bad, because
the inject functions are called directly from the main
script, which means the parent instance of lbmk.
This means that the lock file and temporary files were
not being removed on exit. On a subsequent run, this
would cause the error stating that a lock file is present,
which would cause further error, making the user believe
something is broken in lbmk.
Modify the behaviour accordingly; exits are now returns,
and these are handled in the calling functions, in such
a way that a proper exit occurs, whereby temporary files
and the lock file are deleted.
For context, please read the main "build" script where
it calls vendor_inject and vendor_download. At the end
of that script, it calls tmp_cleanup, which removes the
TMPDIR that was created, and the lock file. In lbmk,
the TMPDIR is not /tmp, but rather a subdirectory
under /tmp, so that further calls to mktemp create
everything under one single temporary directory, which
lbmk automatically removes on exit.
Therefore, this patch also avoids leaving temporary files
laying around on the disk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The exit was dependent upon install_packages returning
zero status, which it always would in practise, due to
its design, but this exit must always be observed, so
the code has been modified to honour this design.
A direct exit violates lbmk's design in most instances,
where a temporary directory and lock file has already
been created; at this stage, no such act was performed,
so a direct exit is perfectly acceptable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we needed these for extracting intel vga roms from
lenovoo updates, for t480, very briefly. about an hour
after i pushed that patch, mate kukri fixed libgfxinit
and then i removed the vgarom integration because it
wasn't needed anymore.
however, i forgot to remove geteltorito/mtools from
dependencies. some distros like fedora were problematic
about it.
the best thing about bugs is when you don't have to fix them.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in this setup, seabios is never the default payload, grub is,
but only if grub is enabled.
set this in target.cfg:
payload_grubsea="y"
if payload_grub isn't enabled, this is auto-set to n
ditto if initmode=normal
NOTE: if flashing libgfx setups, you should make sure
that you're not booting with a graphics card, only intel
graphics. this setting will intentionally not be documented,
because it's not recommended, but is being implemented for
testing purposes (and i implemented it for some guy who i
think is cool). i'll probably also use this myself, since
i already do grub-only setups on all my own machines.
seagrub is the default on x86 because of past instabilities
with grub. to mitigate in case of future issues, since seabios
is always stable, we reduce the chance of bricks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we encountered 1MB flash so far, but we may encounter other
sizes on other machines when added to libreboot later on
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Though not used in coreboot builds, and not injected into the
builds in any way, these files are now created seperately when
handling T480/T480s vendor files:
vendorfiles/t480/tb.bin
vendorfiles/t480s/tb.bin
These are created by extracting Lenovo's ThunderBolt firmware
from update files. The updated firmware fixes a bug; older firmware
enabled debug commands that wrote logs to the TB controller's
own flash IC, and it'd get full up with logs, bricking the controller.
If you've already been screwed by this, you must flash externally,
using a padded firmware from Lenovo's updates.
Lenovo's own updater requires creating a boot CD or booting
Windows. This patch in lbmk auto-downloads just the firmware,
and you can flash it externally.
You could simply do this as a matter of course, when installing
Libreboot. You are recommended to update the Lenovo UEFI/EC firmwares
first, before installing Libreboot; please look at the Libreboot
documentation to know exactly which versions.
Then dump the ThunderBolt firmware first, to be sure, and then you
can flash these files. Flashing these updates will prevent the bug
described here:
https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t480-type-20l5-20l6/20l5/solutions/ht508988
You can download Lenovo's installers for various ThinkPad models
there, including T480s/T480s. It is these downloads that this lbmk
patch uses, to extract those files directly.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
