summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-31vendor.sh: remove unnecessary assignmentLeah Rowe
dl_fail is set to n and then immediately to y afterward why? clearly i was dehydrated Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30git.sh: do not remove .submodulesLeah Rowe
the reason for it is because sometimes the coreboot build system auto-downloads submodules which we don't want. however, we now pass UPDATED_SUBMODULES=1 in make, which disables this behaviour in coreboot's build system. therefore, remove this unnecessary logic. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30import nuke() from cbmk cdce8ba70bLeah Rowe
cbmk revision: cdce8ba70b863ea3fe0ad7a4d7b27d0c5ca30421 as of date 30 May 2024 Canoeboot provides deblobbing, fully, on all sources, so as to provide a GNU FSDG compliant coreboot distro. Libreboot used to do this but now uses a more pragmatic Binary Blob Reduction Policy, allowing better hardware support in general. See: https://libreboot.org/news/policy.html Well! We sometimes still need to delete files in Libreboot, but for other reasons. For example, the poorly licensed strlcat.c file that we delete from U-Boot, in both projects. I currently hardcode such deletions in lbmk. After this revision, I will start using "nuke.list" files as in cbmk. Simply patching the sources to exclude such files, in this context, is not OK because then we are still including them but as diffs. This is why the nuke() function exists. Import Canoeboot's nuke technology. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: skip if blob path is /dev/nullLeah Rowe
We use a path of /dev/null pointing to a ROM for Fam15h AMD boards, to add fake PIKE2008 images. This is to mitigate a hang in SeaBIOS, but now with recent changes, this causes the command below to download coreboot, when it should just exit saying no vendor files needed. Prevent accidentally wasted bandwidth. The command was: ./vendor download kcma_d8_rdimm_16mb This now correctly does the following: $ ./vendor download kcma_d8_rdimm_16mb Vendor files not needed for: kcma_d8_rdimm_16mb The joys of programming a build system in sh! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: more fine-tuned error controlLeah Rowe
By default, the build system does set -u -e Some errors are unavoidable and have to be handled, so we have to set +u +e (turn off error handling in sh), when downloading vendor files, but only certain parts of vendor.sh trigger errors (which cause an exit). Replace the current bazooka approach with a more fine grained approach, turning error handling back on again when it is safe to do so. In the parts of the code where it is disabled, the code is written very, very carefully, with errors still handled manually, but more careful auditing is required. This change has been tested and makes the command much safer to run. In security (or any bug auditing), it is the principle of least privilege that holds true. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29vendor.sh: don't error on main targetsLeah Rowe
e.g. coreboot/default contains no config directory, so the old logic would be trying to do: . which is obviously invalid now for example: $ ./vendor download default Vendor files not needed for: default and it will exit with zero status the only thing that should ever return non-zero status is when you define a target that does not exist, config or no. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26rename include/option.sh to include/lib.shLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26general code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25option.sh: fix bad check for version/versiondateLeah Rowe
i was checking whether it's a directory, whereas i should have been checking whether it's a file. this is a workaround put in place in case someone downloaded a tarball from codeberg which is pre-generated per commit. in this situation, the version and versiondate files do not exist, but the design of the build system requires that they do exist. the existing check is correct except for this bug, so fix the bug. check that they are files, not directories Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: break if a submodule clone succeedsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: allow finer control of git submodulesLeah Rowe
in each submodule configuration directory, a module.cfg file can now be provided. in it, the user can specify two repository links (main and backup) and a revision, like so: subrepo="repo link goes here" subrepo_bkup="backup repo link goes here" subrev="git revision id goes here" additionally: in the *main* project directory for the submodules, a module.list file can be provided. example entries: 3rdparty/vboot 3rdparty/libgfxinit if the module.list file is provided, only those submodules will be downloaded. this can be combined with the module.cfg files, if you wish, but it's optional. you can mix and match. example locations: multi-tree project: config/submodule/coreboot/default/module.list config/submodule/coreboot/default/vboot/module.cfg single-tree project: config/submodule/flashprog/module.list config/submodule/flashprog/foo/module.cfg *no* configuration files have been provided, in this commit, which means that the current behaviour is maintained. follow-up commits will absolutely configure the submodules. this is being done to reduce the number of modules downloaded, because we don't use most of the coreboot submodules that are downloaded, thus wasting bandwidth and the releases are also much bigger than necessary. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24option.sh: generate version file if .git not foundLeah Rowe
a user was getting error "version unset" when using the tarball generated from codeberg. it's recommended to use the git repository properly, or a release archive. mitigate this so that the build succeeds anyway. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move repo copying to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move link_crossgcc to end of fileLeah Rowe
link_crossgcc is called after git_am_patches, so put it after ward Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move xgcc linking to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: skip submodules if .gitmodules missingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: merge patch_submodules in prep_submodulesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: split submodule handling to new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove another meaningless checkLeah Rowe
again, the directory in question is simply used in a for loop using asterisk (git_am_patches) and the for loop simply won't iterate if either the directory doesn't exist or it contains no items. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: shorter variable namesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove meaningless checkLeah Rowe
in the function that immediately follows, it starts two for loops that check every item in that directory, using the asterisk wildcard. if the directory does not exist, then the for loop will simply break on first pass. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove variable not meaningfully usedLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21git.sh: fix invalid command in git_prep()Leah Rowe
"./update project trees" is a leftover from the old build system design, prior to audits. this particular call is for when xtree is defined, which means that a given tree must rely on the given coreboot tree defined by xtree. the "xtree" tree is downloaded, so that its crossgcc builds can be re-used to save time when building targets across many trees. this is because trees often use identical crossgcc builds. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-20git.sh: allow patching submodulesLeah Rowe
for single-tree project (e.g. flashprog): config/submodule/PROJECT/MODNAME/patches for multi-tree project (e.g. coreboot): config/submodule/PROJECT/TREE/MODNAME/patches MODNAME is e.g.: 3rdparty/vboot directory in coreboot: would become vboot (the submodule codepath is filtered to up to the final slash) another example: submodire src dir 3rdparty/foo/bar MODNAME would be "bar" Add whatever patches you like to a given submodule. An example patch is included in this commit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19git.sh: don't delete .git if src/project/projectLeah Rowe
otherwise, "./update release" will epicly fail Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19git.sh: remove fetch_from_upstream()Leah Rowe
the function is very small and only called once, from fetch_project_trees() merge it into fetch_project_trees() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19option.sh: don't return 1 in mkrom_tarballLeah Rowe
one of the calling functions relies on the return value to be always 0, so these error conditions in mkrom_tarball have been altered to cause an *exit* (non-zero) instead. in practise, the commands in question were printf commands run after tho directory they output to had been created, so write access would probably not be an issue. nonetheless, technically correct is the best kind of correct. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19option.sh: mktar_release to mkrom_tarballLeah Rowe
that's all it's used for, to compress the rom images Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: further simplify config handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: greatly simplified config handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: move config checks to detect_firmwareLeah Rowe
they will later be removed, as part of unification against other files that perform the same tasks Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: print an error upon ill-defined targetLeah Rowe
previously, it was attempting to load the configs and silently failing. we must provide feedback to the user. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: remove redundant checkLeah Rowe
we literally do this check twice, in immediate succession. avoid wasted i/o Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18vendor.sh: simplify defconfig checkLeah Rowe
re-use check_defconfig from option.sh Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18git.sh: Remove .git if XBMK_RELEASE=yLeah Rowe
The build system already deletes .git in all source directories for each given release, but does so at the very end; it still does, but now it is deleted one by one per project, to save space during very large builds (release sizes vary wildly, depending on how many trees exist for coreboot basically). If you're building entirely in tmpfs (as I do), this could be a problem if you have lots of .git/ directories. This change reduces disk usage, or in the above example, memory usage when running the build system from tmpfs. This complements another recent change, where ROM images are compressed per target during release builds, rather than all at the very end of the process. It is part of a series of optimisations, to reduce the memory and disk usage of the build system, and to reduce I/O wastage in general. This change will not be the last of such changes! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16lbmk: allow easier sync with cbmkLeah Rowe
an equivalent change has been made in cbmk. certain lbmk-specific variable names have been made generic, with certain functions and other variables moved around. i maintain sync between libreboot and canoeboot, where both projects can have the same behaviours, and most of the merge conflicts have to do with variable names containing "LBMK", "lbmk", "cbmk" or "CBMK", or indeed "canoeboot" and "libreboot" LBMK/lbmk/CBMK/cbmk variables between canoeboot and libreboot now contain the string XBMK/xbmk it should now be *much* easier to merge build system changes between lbmk and cbmk. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15option.sh: delete check_git()Leah Rowe
it's only used from main() in the main build script, and it's very small, as is main() therefore, move the logic into main() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15remove check_project() (always set variables)Leah Rowe
in lbmk, we call check_project() to set variables such as projectname, version, version date this is unnecessary, because all main scripts use this functionality anyway do it by default Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15build/roms: create full release tarball nameLeah Rowe
set relname from option.sh under check_project() now the release logic simply has to move a directory Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15option.sh: don't bother checking for GNU tarLeah Rowe
releases aren't reproducible anyway. we were using options available in gnu tar for this. it will be revisited at a later date. however, the next time this is done, we will use another method because there are in fact portable ways to create tarballs reproducibly, documented on reproducible-builds.org to be revisited, at a later date. for now, remove bloat. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15option.sh: remove insert_version_files()Leah Rowe
it's only called once, from this file, within a small function, and the function itself is very small. remove, and put the contents of the function in the calling function. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15unified sha512sum creation for tarballsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-14move rom tarball creation to script/romsLeah Rowe
export LBMK_RELEASE="y" if this is done, the tarball is created instead of a directory, and the rom images are nuked using ./vendor inject with the nuke option, inserting the correct version files; the rom directory is deleted now the release script logic simple renames existing tarballs. the benefit of this change is fewer lines of code, and now lbmk doesn't use an insane amount of disk space when building a *lot* of release images (the uncompressed directories are deleted after each build) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11mrc.sh: remove redundant function extract_ref()Leah Rowe
extract_ref() is no longer used Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11remove haswell mrc blob (libre raminit stable now)Leah Rowe
broadwell mrc is retained, because it's needed on 820 g2 it's no longer needed on haswell, because nri is stable. nri is short for "native ram initialisation", and libreboot provides this for: thinkpad t440p, thinkpad w541, dell optiplex 9020 mt, and dell optiplex 9020 sff remove, in line with libreboot's binary blob reduction policy previous revisions, prior to the recent release, stated that it would be retained for compatibility, but it's really not right to retain it, because doing so violates libreboot's policy the recent release excluded mrc-based rom images for haswell machines, providing only those rom images that use the libre raminit, while retaining support for mrc in the build system, so that users could still run the lbmk inject script on older release roms that use mrc again: libreboot's binary blob reduction policy is very clear: https://libreboot.org/news/policy.html it is a policy that can be summarised, thus: if a blob can be avoided, it must be avoided. therefore, we will avoid the Haswell MRC raminit blob Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11remove all status checks. only handle release.Leah Rowe
the release variable is all we need, turning a target on or off for a given release. the status checks were prone to bugs, and unnecessary; it also broke certain benchmark scripts. it's better to keep the lbmk logic simpler. board status will be moved to the documentation instead. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11git.sh: remove errant commentLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11merge script/vendor/* into include/vendor.shLeah Rowe
stub it from the main build script the commands remain identical: ./vendor download arguments_here ./vendor inject arguments_here Signed-off-by: Leah Rowe <leah@libreboot.org>