summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2024-06-07git.sh: unified handling of git clone/reset/amLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: simplify submodule handlingLeah Rowe
there were stragglers remaining, from when we used to actually run "git submodule update", but this was removed. clean up the submodule functions and merge them together. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: provide feedback for repository downloadsLeah Rowe
otherwise, it's not clear to the operator what's happening i'm normally against such verbose feedback, because it's bloat, but this minimal amount of feedback will make the build system more pleasant to use, especially during testing. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: download "depend" projects *before*Leah Rowe
don't do it after, because that means the main project is saved under src/ before we know whether the subrepo was downloaded. the "depend" variable (in config/git/) is no longer used for projects that go in subdirectories of a parent; now, we use config/submodules/ for this type of dependency. download the "depend" projects (as per config/git/) first. this way, if they fail, the main one will fail, but if they succeed and main fails, you can just run the main download again and it won't fail. this fixes a bug where, depending on how you download a set of projects and depending on the order which you do so, a given project can become un-downloadable on current design, because git will complain that a directory already exists. this fix is done not only in code (by this commit), but by prior configuration changes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: reduced indentation in fetch_submoduleLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: reduced indentation in prep_submodulesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: *never* run git submodule updateLeah Rowe
only use config/submodules/ which the build system then uses to run git clones manually, replicating the submodules feature. we must never use a project's own gitmodules feature, because we can't easily control it. better to let it break first, and then figure out what modules to add manually, so that we have only what we need for each project. it's done this way, because git's own submodules feature doesn't have very good error checking in general, nor does it have good redundancy. with the current design, we can declare backup repositories for each submodule. we replicate it precisely. for example: 3rdparty/vboot this is a coreboot submodule, and we handle that in the coreboot trees. however, our current design also allows you to do this even if the upstream repository does not contain a .gitmodules file Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07lib.sh: rename variable for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06move handle_coreboot_utils to script/treesLeah Rowe
it doesn't really make sense placed in lib.sh, because it's only called from script/trees Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06put coreboot utils in elf/, not cbutils/Leah Rowe
one directory per util, under elf/ e.g. elf/cbfstool/ further split by tree name, e.g.: elf/cbfstool/default/ elf/cbfstool/foo/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06fix build issue building coreboot utilsLeah Rowe
just run make directly. the trees script isn't really designed to directly build directories, so don't. nothing wrong with good old fashioned make -C Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06git.sh: use singletree() to decide submodulesLeah Rowe
now it no longer hardcodes a check for whether the project name is coreboot. this maintains the same behaviour but will now work for other multi-tree projects; in practise, the other multi-tree projects did not use .gitmodules files anyway, but some of them used config/submodules/ in our build system. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06move cbcfgsdir variable to vendor.shLeah Rowe
it's only ever used here Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06move cfgsdir/datadir variables to lib.shLeah Rowe
it's also used from script/roms, in addition to trees move these variables to a common file used everywhere Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06handle build.list from config/data/, not config/Leah Rowe
certain code checks for build.list, to skip it, for example in items() we already use config/data/grub to store grub config data that applied to all trees create these directories too: config/data/coreboot config/data/u-boot config/data/seabios move the respective build.list files in here, and also to config/data/grub now multi-tree projects contain, per directory, just the target.cfg file and the patches directory. this is much cleaner, because some of the logic can be simplified more Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06don't use build.list to detect multi-tree projectsLeah Rowe
instead, check for the presence of target.cfg files not in config/project/ but config/project/tree/ the way this check is done, it merely returns 1 if config/project/*/target.cfg is detected, and returns 0 in all other cases, even if config/project/target.cfg exists that way, if the maintainer accidentally adds a target.cfg in the main directory, the given multi-tree project will not break Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05move id check to lib.sh tooLeah Rowe
doesn't really matter, it's just an extra layer to ensure reliability, but "id" is pretty standard Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05move root check to lib.sh (bugfix)Leah Rowe
this avoids writing the version/versiondate files as root. this complements the previous fix, that avoided writing those same files when running the dependencies command. initial setup of the build system requires root, to run the dependencies script, but otherwise the build system prevents running as root for everything else, so we must avoid writing the version/versiondate files as root. that same avoidance is necessary when checking whether running other commands as root; ironically, this check then prevented running the build system at all! the bug should be fully fixed now. i found this quite by accident the other day, when testing something else. good thing this got fixed because the release! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05bugfix: move dependencies handling to lib.shLeah Rowe
do it strategically, in just the right place so that the version and versiondate files aren't written. otherwise, version/versiondate are written as root and the build system becomes unusable after that, unless you reset the file ownerships from root. hardly user-friendly. mitigate this bug. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04lib.sh bugfix: check environmental variables rightLeah Rowe
A user had TMUX_TMPDIR set, which broke the TMPDIR check Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03lib.sh: more friendly output from e()Leah Rowe
already of saying "found", say "already exists" this means the output of these commands more user friendly and intuitive: ./update trees -b grub default ./update trees -b coreboot i945 this is just an example. when an ELF file already exists, the build is skipped even if src isn't downloaded. this design is intentional, because it means that you can use previous builds if you want to save time on another. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03badcmd: don't print "no context given"Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03badcmd: link directly to the maintenance manualLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03better help text on invalid commandsLeah Rowe
adding help again is a bad idea. code should never document itself; that's what documentation is for. so, make the code do a better job telling the user where to find documentation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02build: print the project website address on helpLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-31vendor.sh: remove unnecessary assignmentLeah Rowe
dl_fail is set to n and then immediately to y afterward why? clearly i was dehydrated Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30git.sh: do not remove .submodulesLeah Rowe
the reason for it is because sometimes the coreboot build system auto-downloads submodules which we don't want. however, we now pass UPDATED_SUBMODULES=1 in make, which disables this behaviour in coreboot's build system. therefore, remove this unnecessary logic. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30import nuke() from cbmk cdce8ba70bLeah Rowe
cbmk revision: cdce8ba70b863ea3fe0ad7a4d7b27d0c5ca30421 as of date 30 May 2024 Canoeboot provides deblobbing, fully, on all sources, so as to provide a GNU FSDG compliant coreboot distro. Libreboot used to do this but now uses a more pragmatic Binary Blob Reduction Policy, allowing better hardware support in general. See: https://libreboot.org/news/policy.html Well! We sometimes still need to delete files in Libreboot, but for other reasons. For example, the poorly licensed strlcat.c file that we delete from U-Boot, in both projects. I currently hardcode such deletions in lbmk. After this revision, I will start using "nuke.list" files as in cbmk. Simply patching the sources to exclude such files, in this context, is not OK because then we are still including them but as diffs. This is why the nuke() function exists. Import Canoeboot's nuke technology. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: skip if blob path is /dev/nullLeah Rowe
We use a path of /dev/null pointing to a ROM for Fam15h AMD boards, to add fake PIKE2008 images. This is to mitigate a hang in SeaBIOS, but now with recent changes, this causes the command below to download coreboot, when it should just exit saying no vendor files needed. Prevent accidentally wasted bandwidth. The command was: ./vendor download kcma_d8_rdimm_16mb This now correctly does the following: $ ./vendor download kcma_d8_rdimm_16mb Vendor files not needed for: kcma_d8_rdimm_16mb The joys of programming a build system in sh! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: more fine-tuned error controlLeah Rowe
By default, the build system does set -u -e Some errors are unavoidable and have to be handled, so we have to set +u +e (turn off error handling in sh), when downloading vendor files, but only certain parts of vendor.sh trigger errors (which cause an exit). Replace the current bazooka approach with a more fine grained approach, turning error handling back on again when it is safe to do so. In the parts of the code where it is disabled, the code is written very, very carefully, with errors still handled manually, but more careful auditing is required. This change has been tested and makes the command much safer to run. In security (or any bug auditing), it is the principle of least privilege that holds true. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29vendor.sh: don't error on main targetsLeah Rowe
e.g. coreboot/default contains no config directory, so the old logic would be trying to do: . which is obviously invalid now for example: $ ./vendor download default Vendor files not needed for: default and it will exit with zero status the only thing that should ever return non-zero status is when you define a target that does not exist, config or no. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26rename include/option.sh to include/lib.shLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26general code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25option.sh: fix bad check for version/versiondateLeah Rowe
i was checking whether it's a directory, whereas i should have been checking whether it's a file. this is a workaround put in place in case someone downloaded a tarball from codeberg which is pre-generated per commit. in this situation, the version and versiondate files do not exist, but the design of the build system requires that they do exist. the existing check is correct except for this bug, so fix the bug. check that they are files, not directories Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: break if a submodule clone succeedsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: allow finer control of git submodulesLeah Rowe
in each submodule configuration directory, a module.cfg file can now be provided. in it, the user can specify two repository links (main and backup) and a revision, like so: subrepo="repo link goes here" subrepo_bkup="backup repo link goes here" subrev="git revision id goes here" additionally: in the *main* project directory for the submodules, a module.list file can be provided. example entries: 3rdparty/vboot 3rdparty/libgfxinit if the module.list file is provided, only those submodules will be downloaded. this can be combined with the module.cfg files, if you wish, but it's optional. you can mix and match. example locations: multi-tree project: config/submodule/coreboot/default/module.list config/submodule/coreboot/default/vboot/module.cfg single-tree project: config/submodule/flashprog/module.list config/submodule/flashprog/foo/module.cfg *no* configuration files have been provided, in this commit, which means that the current behaviour is maintained. follow-up commits will absolutely configure the submodules. this is being done to reduce the number of modules downloaded, because we don't use most of the coreboot submodules that are downloaded, thus wasting bandwidth and the releases are also much bigger than necessary. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24option.sh: generate version file if .git not foundLeah Rowe
a user was getting error "version unset" when using the tarball generated from codeberg. it's recommended to use the git repository properly, or a release archive. mitigate this so that the build succeeds anyway. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move repo copying to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move link_crossgcc to end of fileLeah Rowe
link_crossgcc is called after git_am_patches, so put it after ward Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move xgcc linking to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: skip submodules if .gitmodules missingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: merge patch_submodules in prep_submodulesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: split submodule handling to new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove another meaningless checkLeah Rowe
again, the directory in question is simply used in a for loop using asterisk (git_am_patches) and the for loop simply won't iterate if either the directory doesn't exist or it contains no items. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: shorter variable namesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove meaningless checkLeah Rowe
in the function that immediately follows, it starts two for loops that check every item in that directory, using the asterisk wildcard. if the directory does not exist, then the for loop will simply break on first pass. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove variable not meaningfully usedLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21git.sh: fix invalid command in git_prep()Leah Rowe
"./update project trees" is a leftover from the old build system design, prior to audits. this particular call is for when xtree is defined, which means that a given tree must rely on the given coreboot tree defined by xtree. the "xtree" tree is downloaded, so that its crossgcc builds can be re-used to save time when building targets across many trees. this is because trees often use identical crossgcc builds. Signed-off-by: Leah Rowe <leah@libreboot.org>