| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i accidentally deleted it in an earlier code purge
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 8196ce6ddf4f0c2320cbb0f8ea378dfff0d639c4.
|
|
the trees script already performs these checks
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
again: the trees script already checks binaries,
and already checks sources. if they exist, the
relevant action is skipped entirely.
we don't need to check it in vendor.sh, because the
trees script already performs the same check.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we don't need to download the entire coreboot tree here,
because the next command after it builds utils from that
tree, using the trees script which would then go and
download that tree anyway; this is part of the design.
if a given elf binary exists, it won't be re-built, but
the missing sources will still be downloaded automatically.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the trees script already does this same check, so don't
do it in here. defer to the trees script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
mktemp will never return empty output, and the next
command after it is an mkdir, which would throw an
error anyway, if the string is empty.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the trees script already performs this check
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also remove inject_vendorfiles() and merge it
into vendor_download()
the "release" variable is included in some target.cfg
files, which we put in config/coreboot/ and handle
here, so they could conflict with the release variable
used in vendor.sh, used for a different purpose. therefore,
rename it to "vrelease".
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we don't need to check this, because the trees script
already checks it. avoid unnecessary work.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
nowadays, we don't insert GRUB keymaps automatically, for
sake of efficiency; without one, the default is US QWERTY.
a user will only want one keymap in particular, so this
is more efficient. in practise, they're either building
from source anyway, or using the inject scripts which
compile cbfstool anyway, so the user will already have
cbfstool.
also output this message from the inject script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's pretty much just doing the same thing as ls -1
remove it!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i don't like that it's not there, because of the quirks
in sh behaviour. put it there to put my mind at ease.
otherwise, this doesn't change any behaviour.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in future revisions, i will make tarballs become subfiles,
to complement submodules. e.g. crossgcc tarballs in coreboot
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
one directory per util, under elf/
e.g. elf/cbfstool/
further split by tree name, e.g.:
elf/cbfstool/default/
elf/cbfstool/foo/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's only ever used here
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
dl_fail is set to n and then immediately to y afterward
why?
clearly i was dehydrated
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We use a path of /dev/null pointing to a ROM for
Fam15h AMD boards, to add fake PIKE2008 images.
This is to mitigate a hang in SeaBIOS, but now with
recent changes, this causes the command below to
download coreboot, when it should just exit saying
no vendor files needed. Prevent accidentally wasted
bandwidth. The command was:
./vendor download kcma_d8_rdimm_16mb
This now correctly does the following:
$ ./vendor download kcma_d8_rdimm_16mb
Vendor files not needed for: kcma_d8_rdimm_16mb
The joys of programming a build system in sh!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
By default, the build system does set -u -e
Some errors are unavoidable and have to be handled, so
we have to set +u +e (turn off error handling in sh),
when downloading vendor files, but only certain parts of
vendor.sh trigger errors (which cause an exit).
Replace the current bazooka approach with a more fine
grained approach, turning error handling back on again
when it is safe to do so.
In the parts of the code where it is disabled, the code
is written very, very carefully, with errors still handled
manually, but more careful auditing is required.
This change has been tested and makes the command much
safer to run. In security (or any bug auditing), it is
the principle of least privilege that holds true.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. coreboot/default contains no config directory, so
the old logic would be trying to do:
.
which is obviously invalid
now for example:
$ ./vendor download default
Vendor files not needed for: default
and it will exit with zero status
the only thing that should ever return non-zero status
is when you define a target that does not exist, config
or no.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they will later be removed, as part of unification against
other files that perform the same tasks
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
previously, it was attempting to load the configs and silently
failing. we must provide feedback to the user.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we literally do this check twice, in immediate succession.
avoid wasted i/o
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
re-use check_defconfig from option.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
an equivalent change has been made in cbmk.
certain lbmk-specific variable names have been made
generic, with certain functions and other variables
moved around.
i maintain sync between libreboot and canoeboot, where
both projects can have the same behaviours, and most of
the merge conflicts have to do with variable names
containing "LBMK", "lbmk", "cbmk" or "CBMK", or
indeed "canoeboot" and "libreboot"
LBMK/lbmk/CBMK/cbmk variables between canoeboot and
libreboot now contain the string XBMK/xbmk
it should now be *much* easier to merge build system
changes between lbmk and cbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
broadwell mrc is retained, because it's needed on 820 g2
it's no longer needed on haswell, because nri is stable. nri
is short for "native ram initialisation", and libreboot provides
this for: thinkpad t440p, thinkpad w541, dell optiplex 9020 mt,
and dell optiplex 9020 sff
remove, in line with libreboot's binary blob reduction policy
previous revisions, prior to the recent release, stated that
it would be retained for compatibility, but it's really not
right to retain it, because doing so violates libreboot's policy
the recent release excluded mrc-based rom images for haswell
machines, providing only those rom images that use the libre
raminit, while retaining support for mrc in the build system, so
that users could still run the lbmk inject script on older release
roms that use mrc
again: libreboot's binary blob reduction policy is very clear:
https://libreboot.org/news/policy.html
it is a policy that can be summarised, thus:
if a blob can be avoided, it must be avoided.
therefore, we will avoid the Haswell MRC raminit blob
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
stub it from the main build script
the commands remain identical:
./vendor download arguments_here
./vendor inject arguments_here
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
move it all to other files where items are used, and not
used anywhere else. this reduces the size of vendor.sh.
also remove a few redundant variables, or variables that
are not meaningfully used.
a few items have been moved to include/option.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they are the functions only used by the download
script, so they don't belong in vendor.sh
an include file should only contain variables and
functions used by multiple main scripts
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
