| Age | Commit message (Collapse) | Author |
|---|
|
don't rely on build/coreboot.rom staying in place,
because sometimes it can get purged under certain
conditions, due to idiosyncrasies in the coreboot
build system, even when we don't explicitly clean it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this time, only handle multiple keymaps on seagrub
images. for images where seabios is first but does
not immediately load grub, whether grub is still
available in flash, just do one image (US Qwerty)
this still results in fewer images per target than
Libreboot 20240612, but should prevent most users
from being annoyed. i got a few people asking
repeatedly, and i hadn't documented yet how to add
keymap.gkb or how to remove bootorder, to get a
different keymap or disable seagrub respectively.
i anticipate that i'll get such questions a lot, even
if i do document it, so i'm reversing that decision.
it doesn't result in much extra code. the new design
in lbmk makes this sort of thing much simpler.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
ccache now required, in build dependencies
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk must still define payloads, but specific configs
may use coreboot's build system instead.
you might use this to add your own config with, say,
tianocore payload, using coreboot.git to build it,
rather than using lbmk's choice of payloads.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
actual source code is not scanned, but config directories are
scanned. simply get the checksum of each file under config/
pertaining to a given project/tree, and also for the given
target. coreboot utilities are also handled.
if it changes, in any way, delete and re-build automatically.
such deletions should probably still be done manually, as part
of understanding the build system, but this change should make
the build system much easier to use during development.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
instead of using lots of if/else conditions, do that once
and set a variable, dry, to :
if not doing a dry run, the variable is empty. prefix this
variable in places where you don't want a certain action to
be performed, on dry runs.
more specifically, : does *nothing* and always returns with
zero status (success).
this results in cleaner code, and a small sloccount reduction.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, due to the idiosyncratic nature of the coreboot
build system, the coreboot.rom gets wiped out.
cbutils is still handled by premake. ensure that payloads are
only inserted just after running the coreboot make command.
fixes a build issues introduced on 9020sff, previously unhandled.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
-d does the same as -b, except for actually building
anything! in effect, it does the same as -f (fetch)
except that the resulting variable assignments will
not be recursive (as with -f).
if -d is passed, configuration is still loaded, defconfig
files are still cycled through, and more importantly:
helper functions are still processed.
the grub, serprog and coreboot helper functions have
been modified to return early (zero status) if -d is
passed.
this behaviour will be used to integrate vendor.sh
logic in with the trees script, for cases where the
user wants to only handle vendor files. e.g.:
./update trees -b coreboot x230_12mb
this would download the files as usual, build coreboot,
with those files, and then build the payloads. but:
./update trees -d coreboot x230_12mb
this would download the files, NOT build coreboot, and
NOT build the payloads.
this change increases the sloccount a bit, but i'm relying
on the fact that the vendor.sh script already re-implements
config handling wastefully; the plan is to only use trees.
for now, simply stub the same ./vendor download command.
there is one additional benefit to doing it this way:
this method is *per-kconfig* rather than per-target.
this way, one kconfig might specify a given vendor file
that is not specified in the other. although the stub
still simply handles this per target, it's done in premake,
which means that the given .config file has been copied.
this means that when i properly re-integrate the logic
into script/trees, i'll be able to go for it per-kconfig.
the utils command has been removed, e.g.
./update trees -b coreboot utils default
the equivalent is now:
./update trees -d coreboot default
this would technically download vendor files, but here
we are specifying a target for which no kconfigs exist;
a check is also in place, to avoid running the vendor file
download logic if tree==target
the overall effect of this change is that the trees script
no longer contains any project-specific logic, except for
the crossgcc build logic.
it does include some config/data mkhelper files at the top,
for serprog and coreboot, so that those variables defined in
those files can be global, but another solution to mitigate
that will also be implemented in a future commit.
the purpose of this and other revisions (in the final push
to complete lbmk audit 6 / cbmk audit 2) is to generalise as
much logic as possible, removing various ugly hacks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <info@minifree.org>
|
|
stub it from the trees script. the way it works now,
there is less code in the build system.
./build roms
this is no longer a thing
./build roms serprog
this is also no longer a thing. instead, do:
./update trees -b coreboot targetnamehere
./update trees -b pico-serprog
./update trees -b stm32-vserprog
the old commands still works, which causes the new
commands to run
coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.
NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.
./build roms list also still works! it will do:
./update trees -b coreboot list
also:
./update trees -b grub list
this is now possible too
if a target "list" is provided, for multi-tree sources,
the targets are shown.
there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.
seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
