summaryrefslogtreecommitdiff
path: root/include/git.sh
AgeCommit message (Collapse)Author
2024-06-07git.sh: reduced indentation in fetch_submoduleLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: reduced indentation in prep_submodulesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: *never* run git submodule updateLeah Rowe
only use config/submodules/ which the build system then uses to run git clones manually, replicating the submodules feature. we must never use a project's own gitmodules feature, because we can't easily control it. better to let it break first, and then figure out what modules to add manually, so that we have only what we need for each project. it's done this way, because git's own submodules feature doesn't have very good error checking in general, nor does it have good redundancy. with the current design, we can declare backup repositories for each submodule. we replicate it precisely. for example: 3rdparty/vboot this is a coreboot submodule, and we handle that in the coreboot trees. however, our current design also allows you to do this even if the upstream repository does not contain a .gitmodules file Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06git.sh: use singletree() to decide submodulesLeah Rowe
now it no longer hardcodes a check for whether the project name is coreboot. this maintains the same behaviour but will now work for other multi-tree projects; in practise, the other multi-tree projects did not use .gitmodules files anyway, but some of them used config/submodules/ in our build system. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30git.sh: do not remove .submodulesLeah Rowe
the reason for it is because sometimes the coreboot build system auto-downloads submodules which we don't want. however, we now pass UPDATED_SUBMODULES=1 in make, which disables this behaviour in coreboot's build system. therefore, remove this unnecessary logic. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30import nuke() from cbmk cdce8ba70bLeah Rowe
cbmk revision: cdce8ba70b863ea3fe0ad7a4d7b27d0c5ca30421 as of date 30 May 2024 Canoeboot provides deblobbing, fully, on all sources, so as to provide a GNU FSDG compliant coreboot distro. Libreboot used to do this but now uses a more pragmatic Binary Blob Reduction Policy, allowing better hardware support in general. See: https://libreboot.org/news/policy.html Well! We sometimes still need to delete files in Libreboot, but for other reasons. For example, the poorly licensed strlcat.c file that we delete from U-Boot, in both projects. I currently hardcode such deletions in lbmk. After this revision, I will start using "nuke.list" files as in cbmk. Simply patching the sources to exclude such files, in this context, is not OK because then we are still including them but as diffs. This is why the nuke() function exists. Import Canoeboot's nuke technology. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26general code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: break if a submodule clone succeedsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24git.sh: allow finer control of git submodulesLeah Rowe
in each submodule configuration directory, a module.cfg file can now be provided. in it, the user can specify two repository links (main and backup) and a revision, like so: subrepo="repo link goes here" subrepo_bkup="backup repo link goes here" subrev="git revision id goes here" additionally: in the *main* project directory for the submodules, a module.list file can be provided. example entries: 3rdparty/vboot 3rdparty/libgfxinit if the module.list file is provided, only those submodules will be downloaded. this can be combined with the module.cfg files, if you wish, but it's optional. you can mix and match. example locations: multi-tree project: config/submodule/coreboot/default/module.list config/submodule/coreboot/default/vboot/module.cfg single-tree project: config/submodule/flashprog/module.list config/submodule/flashprog/foo/module.cfg *no* configuration files have been provided, in this commit, which means that the current behaviour is maintained. follow-up commits will absolutely configure the submodules. this is being done to reduce the number of modules downloaded, because we don't use most of the coreboot submodules that are downloaded, thus wasting bandwidth and the releases are also much bigger than necessary. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move repo copying to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move link_crossgcc to end of fileLeah Rowe
link_crossgcc is called after git_am_patches, so put it after ward Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: move xgcc linking to a new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: skip submodules if .gitmodules missingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: merge patch_submodules in prep_submodulesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: split submodule handling to new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove another meaningless checkLeah Rowe
again, the directory in question is simply used in a for loop using asterisk (git_am_patches) and the for loop simply won't iterate if either the directory doesn't exist or it contains no items. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: shorter variable namesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove meaningless checkLeah Rowe
in the function that immediately follows, it starts two for loops that check every item in that directory, using the asterisk wildcard. if the directory does not exist, then the for loop will simply break on first pass. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22git.sh: remove variable not meaningfully usedLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21git.sh: fix invalid command in git_prep()Leah Rowe
"./update project trees" is a leftover from the old build system design, prior to audits. this particular call is for when xtree is defined, which means that a given tree must rely on the given coreboot tree defined by xtree. the "xtree" tree is downloaded, so that its crossgcc builds can be re-used to save time when building targets across many trees. this is because trees often use identical crossgcc builds. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-20git.sh: allow patching submodulesLeah Rowe
for single-tree project (e.g. flashprog): config/submodule/PROJECT/MODNAME/patches for multi-tree project (e.g. coreboot): config/submodule/PROJECT/TREE/MODNAME/patches MODNAME is e.g.: 3rdparty/vboot directory in coreboot: would become vboot (the submodule codepath is filtered to up to the final slash) another example: submodire src dir 3rdparty/foo/bar MODNAME would be "bar" Add whatever patches you like to a given submodule. An example patch is included in this commit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19git.sh: don't delete .git if src/project/projectLeah Rowe
otherwise, "./update release" will epicly fail Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19git.sh: remove fetch_from_upstream()Leah Rowe
the function is very small and only called once, from fetch_project_trees() merge it into fetch_project_trees() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18git.sh: Remove .git if XBMK_RELEASE=yLeah Rowe
The build system already deletes .git in all source directories for each given release, but does so at the very end; it still does, but now it is deleted one by one per project, to save space during very large builds (release sizes vary wildly, depending on how many trees exist for coreboot basically). If you're building entirely in tmpfs (as I do), this could be a problem if you have lots of .git/ directories. This change reduces disk usage, or in the above example, memory usage when running the build system from tmpfs. This complements another recent change, where ROM images are compressed per target during release builds, rather than all at the very end of the process. It is part of a series of optimisations, to reduce the memory and disk usage of the build system, and to reduce I/O wastage in general. This change will not be the last of such changes! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11git.sh: remove errant commentLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27safer, simpler error handling in lbmkLeah Rowe
in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-26git.sh: also reset xtree/tree_depend hereLeah Rowe
it's still necessary here, to prevent the same bug identified in the previous patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: fix bad call to ./updateLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: support downloading dependency treesLeah Rowe
a tree can specify: tree_depend="treename" this will make the other tree be downloaded. this is used for coreboot trees, to ensure that dependency trees are downloaded, because trees can now re-use crossgcc from other trees. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21re-use crossgcc builds on the coreboot treesLeah Rowe
don't build crossgcc twice, especially if two coreboot trees use the same revision! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.cfg: simplified revision checkingLeah Rowe
it only needs to be checked before git reset Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01add copyright 2024 leah rowe to edited filesLeah Rowe
i forgot to add 2024 on the copyright years, for my copyright files that i edited on 1 january 2024 Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: simplify submodule handling in git_prepLeah Rowe
u-boot doesn't use submodules, so there's no point in checking for it. now we can do with just one call to the git submodule command, for simplicity also, general code cleanup in this file (minor code formatting improvements) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: further simplify git_prepLeah Rowe
the directory is checked for deletion, but it's already checked before download, to see whether it already exists. lbmk already exits with zero status if the directory exists, so the check is pointless (in this function) also, general code style/formatting cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: unify am/submodule and tree copyingLeah Rowe
do it all in a single function! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh cleanup: git am handling (remove patchfail)Leah Rowe
the patchfail variable was only needed in the old design, where git am was being handled inside a subshell, and also when we did it directly in the target directory without using a temporary directory. with the current design, we can just call err() and ditch the tmp repo Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: clean up handling of tmp_git_dirLeah Rowe
delete it once once, and delete it much sooner, right at the start of script/update/trees main() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: fix regression: patches before submodulseLeah Rowe
there isn't really a problem right now, but a desired and implemented behavioural change was that patches are to be applied *before* updating submodules. well, the previous commit reversed this change, under certain conditions, such that submodules were applied first. this patch fixes it, so that patches are done first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: clean up git submodule/am handlingLeah Rowe
unify all of the logic, where git am and submodule is handled Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30git.sh multi-tree: grab submodules *after* patchesLeah Rowe
right now, if we want to patch a project such that certain submodules are no tdownloaded, or diffreent submodules are downloaded, or current ones are downloaded from other locations, we cannot do this, because we apply submodule updates *before* applying patches. therefore, we should change it so that they are applied *after* installing patches. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-28lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24lbmk scripts: shorter code linesLeah Rowe
while seemingly pedantic, this does actually make code easier to read. mostly just switching to shorthand for variable names, where no expansions or patterns are used Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-22general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19git.sh: simplify submodule handlingLeah Rowe
do not use a subshell. use git -C instead. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19git.sh git_am_patches: reduce indentationLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19git.sh fetch_config: simplify tree name checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16fix several shellcheck warningsLeah Rowe
lbmk didn't quote certain arguments in commands, or used ! -z instead of -n, things like that. simple fixes. Signed-off-by: Leah Rowe <leah@libreboot.org>