summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2024-05-21fix building coreboot images on i686 hostsLeah Rowe
firstly, memtest86+ is currently not cross compiled and relies on 64-bit headers (x86_64 only). a 32-bit distro is unlikely to be able to build 64-bit binaries. secondly: vboot throws a build error due to -Werror when building on 32-bit hosts. we rely on vboot code to build cbfstool, so turn off -Werror on vboot that's all. 32-bit hosts are not recommended; it is assumed that you are building on an x86_64 host. work will go into the build system at a later date to make it more portable, by cross compiling everything, but this should fix 32-bit for now. there are some x60/t60 users who still want to build roms, so let's allow them that possibility. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21Merge pull request 'Also try unlocking encrypted volume on NVMe' (#213) from ↵Leah Rowe
mkukri/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/213
2024-05-21Also try unlocking encrypted volume on NVMeMate Kukri
2024-05-21Merge pull request 'Add NVMe support to GRUB2 payload' (#212) from ↵Leah Rowe
mkukri/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/212
2024-05-21Merge pull request 'Fix E6400 display issue with 1440 x 900 panel' (#211) ↵Leah Rowe
from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/211
2024-05-21Merge pull request 'Add pt qwerty keymap to lbmk' (#210) from ↵Leah Rowe
samuraikid/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/210
2024-05-20Add NVMe support to GRUB2 payloadMate Kukri
Tested on OptiPlex 3050 (via injecting grub2.elf into WIP coreboot port).
2024-05-20Fix E6400 display issue with 1440 x 900 panelNicholas Chin
The E6400 uses a 100 MHz reference clock on DPLL_REF_SSCLK, whereas libgfxinit assumed that the reference was always 96 MHz. The frequency difference caused by a 100 MHz reference with PLL config values calculated assuming a 96 MHz reference were not significant enough to cause noticable issues with the more common 1280 x 800 panels, but are enough to matter for the 1440 x 900 panels which use a higher pixel clock. This only affected the pre-OS graphics environment provided by libgfxinit, as Linux drivers would determine the reference clock frequency based on data in the VBT. Fix this by making the reference clock frequency in libgfxinit configurable for GM45 based on a new coreboot Kconfig, which is set to 100 MHz for the E6400. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-20git.sh: allow patching submodulesLeah Rowe
for single-tree project (e.g. flashprog): config/submodule/PROJECT/MODNAME/patches for multi-tree project (e.g. coreboot): config/submodule/PROJECT/TREE/MODNAME/patches MODNAME is e.g.: 3rdparty/vboot directory in coreboot: would become vboot (the submodule codepath is filtered to up to the final slash) another example: submodire src dir 3rdparty/foo/bar MODNAME would be "bar" Add whatever patches you like to a given submodule. An example patch is included in this commit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18Add pt qwerty keymap to lbmksamuraikid
Signed-off-by: samuraikid <samuraikid@noreply.codeberg.org>
2024-05-12disable x301 for next release (for now)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11remove haswell mrc blob (libre raminit stable now)Leah Rowe
broadwell mrc is retained, because it's needed on 820 g2 it's no longer needed on haswell, because nri is stable. nri is short for "native ram initialisation", and libreboot provides this for: thinkpad t440p, thinkpad w541, dell optiplex 9020 mt, and dell optiplex 9020 sff remove, in line with libreboot's binary blob reduction policy previous revisions, prior to the recent release, stated that it would be retained for compatibility, but it's really not right to retain it, because doing so violates libreboot's policy the recent release excluded mrc-based rom images for haswell machines, providing only those rom images that use the libre raminit, while retaining support for mrc in the build system, so that users could still run the lbmk inject script on older release roms that use mrc again: libreboot's binary blob reduction policy is very clear: https://libreboot.org/news/policy.html it is a policy that can be summarised, thus: if a blob can be avoided, it must be avoided. therefore, we will avoid the Haswell MRC raminit blob Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11remove all status checks. only handle release.Leah Rowe
the release variable is all we need, turning a target on or off for a given release. the status checks were prone to bugs, and unnecessary; it also broke certain benchmark scripts. it's better to keep the lbmk logic simpler. board status will be moved to the documentation instead. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-10bump seabios to e5f2e4c69643bc3cd385306a9e5d29e11578148cLeah Rowe
changes upstream, relative to the previous revision: * e5f2e4c6 pciinit: don't misalign large BARs * 731c88d5 stdvgaio: Only read/write one color palette entry at a time * c5a361c0 stdvga: Add stdvga_set_vertical_size() helper function * 22c91412 stdvga: Rename stdvga_get_vde() to stdvga_get_vertical_size() * 549463db stdvga: Rename stdvga_set_scan_lines() to stdvga_set_character_height() * c67914ac stdvga: Rename stdvga_set_text_block_specifier() to stdvga_set_font_location() * aa94925d stdvga: Rework stdvga palette index paging interface functions * 8de51a5a stdvga: Rename stdvga_toggle_intensity() to stdvga_set_palette_blinking() * 96c7781f stdvga: Add comments to interface functions in stdvga.c * 2996819f stdvga: Rename CGA palette functions * 91368088 stdvgamodes: Improve naming of dac palette tables * 70f43981 stdvgamodes: No need to store pelmask in vga_modes[] * 1588fd14 vgasrc: Rename vgahw_get_linesize() to vgahw_minimum_linelength() * d73e18bb vgasrc: Use curmode_g instead of vmode_g when mode is the current video mode * 192e23b7 vbe: implement function 09h (get/set palette data) * 3722c21d vgasrc: round up save/restore size * 5d87ff25 vbe: Add VBE 2.0+ OemData field to struct vbe_info * 163fd9f0 fix smbios blob length overflow * 82faf1d5 Add LBA 64bit support for reads beyond 2TB. * 3f082f38 Add AHCI Power ON + ICC_ACTIVE into port setup code * 3ae88886 esp-scsi: terminate DMA transfer when ESP data transfer completes * a6ed6b70 limit address space used for pci devices. Signed-off-by: Leah Rowe <info@minifree.org>
2024-05-04Libreboot 20240504 release20240504Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04config/git: importer newer documentationLeah Rowe
I'm on a schedule here and don't have time to do the release changelog before actually compiling the release. I'm pushing the release changelog / news announcement *while the release is building*. Therefore, the actual release archive will contain Libreboot documentation, but from the lbwww revision just before the release announcement. (a changelog file is still generated from Git, and included in releases) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04coreboot: update latitude release statusLeah Rowe
working s3 means i'm happy to mark it as being stable. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04d510mo and d945gclf: disable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04nb/haswell: lock policy regs when disabling IOMMULeah Rowe
Angel Pons told me I should do it. See comments here: https://review.coreboot.org/c/coreboot/+/81016 I see no harm in complying with the request. I'll merge this into the main patch at a later date and try to get this upstreamed. Just a reminder: on Optiplex 9020 variants, Xorg locks up under Linux when tested with a graphics card; disabling IOMMU works around the issue. Intel graphics work just fine with IOMMU turned on. Libreboot disables IOMMU by default, on the 9020, so that users can install graphics cards easily. I'm pretty sure this is the correct way to do it. The machine still seems to boot, in this configuration. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04deprecate MRC 9020MT/SFF (NRI 9020 is default now)Leah Rowe
NRI is libre raminit MRC is binary blob raminit the libre raminit is stable enough now that it's default the MRC-based targets will be removed in a future release Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04mark 9020 sff/mt stable for releaseLeah Rowe
i initially decided to say unstable, but the default configuration is reliable; the only caveat is that if you enable IOMMU, you must only be using intel graphics. this is already documented in warn.txt files, and on the website, so it's more than ok to call this stable. i use one of these myself as my daily driver and it's rock solid. i haven't had any problems with it. i also sell these to people with libreboot. no problems. mark it as stable, ready for a full release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04mark lenovo x301 as stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03coreboot/default: Add patches to fix S3 on SNB/IVB LatitudesNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-03remove x220edp/x230edp (keep regular x220/x230)Leah Rowe
nitrocaster boards are hard to find nowadays and i'm not comfortable supporting the knockoff chinese gear; quality varies greatly, and i can't know how reliable they are. nitrocaster has been out of business so it's just not viable to support this mod anymore. in fact, keeping the eDP-based targets is a liability to libreboot. regular x220/x230 (non-eDP-modded) are retained. the eDP modkit from nitrocaster let you use eDP screens instead of lvds, on thinkpad x220 and x230, letting you use higher resolution screens. older lbmk revs can still be used, if you happen to come across one of these boards. i only recommend using the official nitrocaster board, if youcan find one unused. ymmv with the chinese gear. better just use an unmodded x230 or get a different machine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03update hp machines to status=stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03Enable WiFi on HP EliteBook 8560w (GPIO config)Leah Rowe
angel pons said how to fix it. more info in the patch. works perfectly. i still see that scancode in dmesg and i guess i have to assign it to some function that sets software rfkill hw rfkill is no longer set. it's unblocked, and i can use wifi. just in time for the libreboot release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03Merge pull request 'Implemented failsafe options at boot and inside menus ↵Leah Rowe
for enabling/disabling serial, spkmodem and gfxterm' (#203) from livio/lbmk:failsafe into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/203
2024-05-03coreboot/x301: set release=n (will re-test)Leah Rowe
was reported broken on canoeboot 0.1, which uses 2021 coreboot. we use much newer coreboot now in libreboot, but still, better be cautious. set to release=n. i'll set status and remove release=n if it works on testing Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03mark x4x boards ready for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-02Merge pull request 'Fixed QEMU x86 target's SMBIOS informations' (#205) from ↵Leah Rowe
livio/lbmk:qemux86_fix into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/205
2024-05-02Merge pull request 'Fixed boot selection menu' (#204) from ↵Leah Rowe
livio/lbmk:livio_290424 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/204
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed boot selection menulivio
2024-05-01correct dell latitude status for releaseLeah Rowe
it should be marked unstable, though these machines are basically reliable; they have certain missing features and quirky behaviour so it's important not to over-sell it mark it as unstable, on all of the dell latitudes Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01update release status for HP machinesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set gru bob/kevin stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set dell latitudes stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01mark i945 machines as stable for releaseLeah Rowe
the previous issue was tested, and can no longer be reproduced Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-29Implemented failsafe options at boot and inside menus for enabling/disabling ↵livio
serial, spkmodem and gfxterm
2024-04-28build/roms: simplified seagrub handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28eDP configs (x230/x220): don't releaseLeah Rowe
set to release="n" for now until the eDP targets are fixed. the regular non-eDP targets are stable, and will be released. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28fix target.cfg files on dell latitudesLeah Rowe
some latitudes still used the old style for variables in target.cfg, specifically arch="x86_64" - lbmk used to then check that on a big if/else and translate it to the correct target name for crossgcc, e.g. i386-elf, arm-eabi now it just puts the arch directly, in a new variable: xarch change arch="x86_64" to xarch="i386-elf" in these files. also remove a few obsolete variables. should build now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28use mirrorservice.org for iasl downloadsLeah Rowe
github is unreliable. i host these files myself. coreboot uses intel.com again now in the latest revisions, and intel broke it before. i'm going to start backing up the acpica releases onto my rsync server from now on, and keep patching coreboot to use my files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update macbook21/x60/t60 statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update 9020 sff/mt release statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update more board statuses before releaseLeah Rowe
what's left to properly test are pineview/x4x/i945 and some of the ivy/sandy elitebooks/hp workstations Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27Set status=unstable on dell latitudesLeah Rowe
also warn about issues, in a warn.txt file for each. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare ivy/sandy thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare gm45 thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>