summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2023-12-20config/ifd/xx30: Fix 16_ifd component density and countNicholas Chin
The component 1 and 2 densities were still set to 8 MiB and 4 MiB respectively, which is incorrect for 16 MiB only configurations. Change the component 1 density to 16 MiB so that the address space gets properly mapped to SPI 1. In addition, change the number of components field (byte 0x15) to 0x00 to indicate 1 flash chip. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-12-18grub.cfg syslinux: support scanning /boot/EFI/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: fix pathLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle btrfs subvols for extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan extlinux/extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: support grub and extlinux on ata/ahciLeah Rowe
there are special menuentries just for loading configs, without handling luks, lvm and whatnot. it's intended for users of cd/dvd drives. well, now we support both extlinux and grub, with this patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: merge isolinux/grub usb menuentriesLeah Rowe
many modern distros use grub in their installer images, so scan for grub.cfg first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle extlinux in the default menuentryLeah Rowe
isolinux/syslinux/extlinux config files should all work, using the syslinux parser function in grub the current behaviour is to only search for grub.cfg, so extlinux users can't use the default libreboot setup. with this change, their systems should hopefully work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg syslinux: support ESP and extlinux.confLeah Rowe
the so-called EFI System Partition (ESP) is used on many UEFI-based setups. some users may be migrating to libreboot, so let's support it. on BIOS setups, it would be e.g. /boot/syslinux/syslinux.conf on UEFI setups, it would be e.g. /boot/EFI/syslinux/syslinux.conf additionally, support scanning for extlinux.conf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: don't boot linux without a grub.cfgLeah Rowe
the fallback code in the main menuentry is potentially unsafe, depending on user config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan lvm volumes lastLeah Rowe
lvm/* is slow to resolve in grub, on some machines, because grub enumeration is very slow in general. however, many people will install distros with any number of lvm configurations, so we should try to support them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Revert "grub.cfg: try luks2/crypto-lvm before non-crypto"Leah Rowe
This reverts commit 20389655e42e62ebf6d96dd106c91fbe74282557. If the user actually has encryption, but has /boot unencrypted, this will considerably slow down the boot, so the patch has been reverted. The patch was originally meant to favour encrypted /boot setups, but the old behaviour also still works there.
2023-12-18grub.cfg: try luks2/crypto-lvm before non-cryptoLeah Rowe
when the user sets up an encrypted machine, grub.cfg defaults to non-encrypted setups if found, first this patch reverses the order, deferring to non-encrypted installations only when encrypted ones are unavailable Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Merge pull request 'master' (#165) from risapav/lbmk:master into masterLeah Rowe
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/165
2023-12-18Update config/grub/config/grub.cfgsemigel
grub.cfg: add BTRFS subvol support
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-11config/dependencies/debian: add unifont-bin & xfonts-unifontRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: openssl-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: freetype-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies typoRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-11-22revert flashrom back to version 1.2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-15dependencies/debian: fix libfreetype-devLeah Rowe
install libfreetype-dev, instead of libfreetype6-dev this still works in debian stable (currently 12.2) but fixes debian sid, as of 15 November 2023. my test machine with debian sid could not install libfreetype6-dev, but could install libfreetype-dev Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-13grub: re-add fat/nt file system modulesLeah Rowe
apparently some people use fat file systems for /boot on linux systems this is apparently a thing it's ridiculous, but also a thing a user reported they could not boot their t400 because of those, because they have such a distro installed on their machine apparently it was a gentoo user i don't really care. re-add 1980s dos file system support. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-09Bump GRUB revision to 8 November 2023 revisionLeah Rowe
Now the revision is: 64e3cee72ab8f5876abfebb263b5e6cf7c4a9a4e The old revision was: e58b870ff926415e23fc386af41ff81b2f588763 With this new revision update, the following patches have been imported from the upstream GRUB project: * 64e3cee72 gpt: Add compile time asserts for guid and gpt_partentry sizes * 7de6fe963 types: Split aligned and packed guids * 5fc985bfd gpt_partition: Mark grub_gpt_partentry as having natural alignment * 7ad30299d efi: Deduplicate configuration table search function * c6cf807fc lsefi: Add missing static qualifier * a964e359b types: Fix typo * 3f79e3b15 util/grub-mount: Check file path sanity * 85e40b36e configure: Make the DJVU_FONT_SOURCE configurable with --with-dejavufont=FILE * 2d6631d2a configure: Make the Unifont FONT_SOURCE configurable with --with-unifont=FILE * 07318ee7e fs/xfs: Fix XFS directory extent parsing * ad7fb8e2e fs/xfs: Incorrect short form directory data boundary check * 4e10213de Revert "zfsinfo: Correct a check for error allocating memory" * 4266fd2bb disk/i386/pc/biosdisk: Read up to 63 sectors in LBA mode * cab04dcda kern/i386/pc/init: Flush cache only on VIA C3 and earlier * 3c7e84257 fs/btrfs: Zero file data not backed by extents * 4bcf6f747 kern/ieee1275/init: Restrict high memory in presence of fadump on ppc64 * cf58eca2a tests/util/grub-shell: Enable RNG device to better test stack smashing * c3bdf263f kern/efi/init: Disable stack smashing protection on grub_efi_init() * 95963d97f disk/cryptodisk: Add support for LUKS2 in (proc)/luks_script * 016f14257 disk/cryptodisk: Optimize luks_script_get() * f7a663c00 term/serial: Ensure proper NULL termination after grub_strncpy() * a19e47ca4 commands/efi/lsefisystab: Print the UEFI specification revision in human readable form Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06add grub mods: diskfilter,hashsum,loadenv,setjmpLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06re-add grub modules: f2fs, json, read, scsi, sleepLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06Merge pull request 'Dell Latitude E6530 support' (#151) from ↵Leah Rowe
nic3-14159/lbmk:e6530 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/151
2023-11-05config/coreboot/e6430_12mb: Fix configsNicholas Chin
Fix a few issues with the E6430 configs to make it consistent with configs for other boards and function as intended. - Add VBT to CBFS: Although the VBT was enabled at the board level Kconfig in a previous commit (CONFIG_INTEL_GMA_HAVE_VBT), the config to actually add the VBT to CBFS was still unset. - Enable the static option table: The old config would always use the fallback values hard coded in the coreboot tree, rather than the settings in the cmos.default file - Enable DRAM clear on boot: This was not set previously, even though most other boards set this for security. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-05Add Dell Latitude E6530 supportNicholas Chin
This is pretty much the same as the E6430 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-05config/ifd: Rename e6430 to dell_ivybridgeNicholas Chin
This is to support future patches for other Ivy Bridge Dell Latitudes. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-06Libreboot 2023110620231106Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05include untitledssg docs in releasesLeah Rowe
now the docs are complete, in releases. they contain the libreboot site, libreboot images, the untitled static site generator and untitled static site generator documentation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05put images in the proper place, in releasesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05roll back untitled revisionLeah Rowe
i haven't updated site.cfg yet Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05config/git: merge img files with docsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05use mirrorservice.org for gcc downloadsLeah Rowe
the gnu.org 302 redirect often fails Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05Merge pull request 'Enable VBT for E6430' (#147) from ↵Leah Rowe
nic3-14159/lbmk:enable-e6430-vbt into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/147
2023-11-05grub: avoid printing empty error messagesLeah Rowe
this replaces the previous behaviour, which erred on a specific value of grub_errno, which was a problem if other types of errors used that value. due to the way i patch out the prefix error messages, this new patch ensures that only those errors are silenced. all other messages will be printed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05Recreate i945 coreboot configs from scratchLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05dell/e6400: set vram to max (256mb)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05further silence grub prefix errorsLeah Rowe
it still printed "error: ." on screen, instead of the prefix message. now it's silent. it just says: Welcome to GRUB! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05grub: don't print messages if a module isn't foundLeah Rowe
it can annoy some users, so just silence it. we don't need a lot of modules so we only have a few, but some distro grub configs can load modules frivilously. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05grub: don't print prefix errors on the screenLeah Rowe
still set grub_errno, and behave the same, but don't print anything. just carry on execution as normal. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05coreboot: re-configure gm45 thinkpads from scratchLeah Rowe
TSEG Stage Cache enabled again, because disabling it did not affect S3 in any way. Many configs have changed, and debug level is set to 7. In testing with V-T60 on IRC, it wasn't just removal of the DDR2 patch that I did, but I re-did the configs too, in exactly the same way I've done them here, when testing on an X200 to fix boot issues. Libreboot does not use defconfigs, instead it uses full configs, and these have to be updated. I normally just run make-oldconfig on every config, for revision updates. However, every now and then, we need to re-do them. Play it safe and re-do every config. I've double- and triple-checked that the configs are correct. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05coreboot/dell: move e6400 to new tree, dellLeah Rowe
the ddr2 fix broke *ddr3* on gm45 thinkpads in testing, depending on memory modules. this was established by removing patches, re-doing configs etc, on a user's X200 (testing gentoo and freebsd). the X200 kept randomly rebooting or having random glitches. the configs themselves (gm45 thinkpads) will also be re-done, because i found minor issues unrelated, but this patch moves dell e6400 to its own tree. the ddr2 fix is no longer present in coreboot/default, only coreboot/dell. i noticed minor differences in gm45 thinkpad configs, when re-doing the configs, versus what are currently in lbmk master; for instance, vbt was not enabled anymore, on thinkpad x200. modifications to these will be done separately. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05Dell E6430: use ME Soft Temporary DisableLeah Rowe
me_state=Disabled in cmos.default Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-04Enable VBT for E6430Nicholas Chin
The original E6430 patch included the Intel VBT file, but did not actually enable it in Kconfig. Update the patch to enable it and update the E6430 configs.
2023-11-03merge untitled with docs, in releasesLeah Rowe
with this, you can just do: cd src/docs ./build the html files would then be available for publishing, if you wish, or you could set up a local httpd to view them. if you have pandoc installed, this will build the markdown files into html untitled static site generator is what generates the html files, from the markdown files, on the website. it will now also be included in releases. Signed-off-by: Leah Rowe <leah@libreboot.org>