summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2023-10-14u-boot: Add patch to avoid regulator errorsAlper Nebi Yasak
U-Boot upstream has added a reference counting for regulator enable actions which somehow makes gru-kevin unbootable. Add a workaround that makes it work again. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: Update to v2023.10Alper Nebi Yasak
Set default U-Boot revision to v2023.01 and rebase patches on top of that. Another series about 16x32 fonts was merged upstream, so drop some now-unnecessary patches we had for that. For the video damage tracking series, switch to the version I'm trying to upstream. Upstream kconfig status is a bit unstable, so updating configs with `make oldconfig` would miss important upstream changes, since they rely on carrying defaults via upstream defconfigs. Update the configs as such: - Turn old configs into defconfigs (./update project trees -s u-boot) - Save the diff from old upstream defconfig (diffconfig $theirs $ours) - Update U-Boot revision, rebase patches, and clean old trees - Prepare new U-Boot tree (./update project trees -f u-boot) - Review the diffconfigs to see if any options were renamed upstream - Copy over the new upstream defconfigs and apply earlier diff - Turn new defconfigs into configs (./update project trees -l u-boot) Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: qemu_arm64_12mb: Remove misleading rev fieldAlper Nebi Yasak
The U-Boot build for qemu_arm64_12mb board refers to a code revision whereas it uses the common "default" tree, remove the bad reference. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14build/fw/coreboot: Fix misuse of raw u-boot.bin as payloadAlper Nebi Yasak
The "u-boot.bin" file generated by U-Boot builds is a raw binary. When adding payloads to a CBFS, we need to use ELF files with add-payload or manually pass the entry point and load address of the payload binary with add-flat-binary. We primarily use the "u-boot.elf" which gets build with the REMAKE_ELF option, as it also has the necessary device-tree binary that U-Boot usually needs to work. When the option is not set (e.g. for QEMU), we need to use the "u-boot" file which is an ELF. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-12coreboot/default bump: rev d862695f5f, 12 Oct 2023Leah Rowe
Riku's mSATA patch for HP8300USDT was merged upstream, so the patch has been dropped from lbmk because it is contained within this new coreboot revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12use me_cleaner from coreboot instead of upstreamLeah Rowe
coreboot closely matches upstream, whose current release is version 1.2 from 2018, and coreboot has not changed it in any meaningful way. the upstream did add patches since, but they are documentation patches only. this means: we do not need to use the upstream version Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10config/dependencies: fix unifont on arch/parabolaLeah Rowe
it's unarchiver in repos. not unar. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/ubuntu: symlink to debianLeah Rowe
this is for the latest ubuntu release. the ubuntu2004 config (for ubuntu 20.04) still exists, and will remain in place. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies: add popos configLeah Rowe
symlinked to the debian config Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/debian: add autopointLeah Rowe
a user installed these dependencies in popos, but autopoint was missing during the grub build. add autopoint to the debian dependencies config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09disable 32-bit memtest86plus, only build 64-bitLeah Rowe
some users reported build errors. technically, there's nothing wrong with lbmk but it relies on hostcc, and hostcc is hit or miss when it comes to cross compiling 32-bit, depending on the build system of whatever project. lbmk needs to handle cross compilation. for now, i'm just disabling memtest86plus on non-64-bit hosts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump grub revisionLeah Rowe
most of the changes since last revision aren't very useful to us; most of them pertain to fs/ntfs, but there is one that is interesting: 48f569c78a496d3e11a4605b0999bc34fa5bc977 kern/acpi: Skip NULL entries in RSDT and XSDT Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump seabios revisionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07rename blob/ to vendor/Leah Rowe
in the future, we may start downloading files that aren't blobs, such as mxm port configs (on mainboards that use MXM graphics) this directory will contain all of those files generally change the language used, across lbmk, to make use of "vendorfile" instead of "blob" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07Rename blobs/ to blob/Leah Rowe
We don't have a directory names "srces", just "src". Ditto ecs, mrcs <-- it's just ec and mrc When referring to a file, e.g. blob/t1650/me.bin, that makes much more sense, because it's a single blob, not multiple blobs. Don't pluralise what isn't plural Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put all src downloads under src/Leah Rowe
build/release/src was partly re-written to accomodate this memtest86plus was patched to have a central Makefile, and lbmk modified to use that, rather than mess with build32 and build64. the central Makefile just builds both targets or cleans both targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02grub.cfg: disable the pagerLeah Rowe
The pager causes trouble in some cases, where the user has to press enter at boot time depending on the configuration. Interactive use is one thing, but we should leave this disabled for smoother experience. If the user *wishes* to use the shell, they can always just enable the pager themselves by doing: set pager=1 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-29update/blobs/*: simplify mrc.bin handlingLeah Rowe
mrc.bin is now handled by include/mrc.sh, adapted from now-deleted script/update/blobs/mrc much of the logic has been re-written or adapted for inside script/update/blobs/download mrc links/hashes now defined in config/blobs/sources the new code is simpler (and smaller). in addition, lbmk can now easily handle mrc.bin files for other platforms such as broadwell. watch this space. the full .zip download is now cached, like with other vendor downloads. this means it won't be re-downloaded if it was already downloaded before. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25split up grub patches into subdirectoriesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Update email address for Leah Rowe copyrightsLeah Rowe
also, some of them were out of date; years now updated. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/repos: concatenate multiple revision filesLeah Rowe
With this change, it's still possible to have a single file at config/git/revisions, but this has been scrapped. Instead, multiple files now exist under config/git/ with the same modules declared, but the files are separated logically. List of files under config/git: * bios_extract * biosutilities * coreboot * flashrom * grub (gnulib also defined here) * me_cleaner * memtest86plus * seabios * serprog (multiple projects defined) * u-boot * uefitool The rationale behind this change is simple: in the future, we will stop relying on build systems within imported projects for the import of git submodules. Instead, we will handle them directly in lbmk. Additionally, a Linux payload is planned for Libreboot, made easier by the recent audit (script handle/make/config makes it easy to integrate Linux, and handle cross-compilers for userland utilities); a "linux" file under config/git/ could also define rules for each project besides linux, such as musl libc, busybox and other utilities. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-24update grub revisionLeah Rowe
It's now 44 revisions above 2.12-rc1, not 17 above. The additional patches (in GRUB master) contain several important fixes, including cryptodisk and ZFS fixes plus a few other interesting changes, namely: 14c95e57fddb6c826bee7755232de62efc8eb45b: kern/misc: Make grub_vsnprintf() C99/POSIX conformant 296d3ec835ed6e3b90d740e497bb534f14fe4b79: disk/cryptodisk: Fix missing change when updating to use grub_uuidcasecmp() 42a831d7462ec3a114156d56ef8a03e1d47f19e7: ZFS: support inode type embed into its ID 96446ce14e2d1fe9f5b36ec4ac45a2efd92a40d1: ZFS: Fix invalid memcmp 444089eec6042250ce3a7184cb09bd8a2ab16808: ZFS: Don't iterate over null objsets 7ce5b4911005b2a0bfd716d92466b6711844068c: ZFS: Check bonustype in addition to dnode type There are more patches than this, but these are the ones that strike me as interesting for Libreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12Merge pull request 'make clean stm32-vserprog for release' (#130) from ↵Leah Rowe
Riku_V/lbmk:makeclean into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/130
2023-09-11make libopencm3 correctlyRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11Download libopencm3 before buildingRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11coreboot/hp8200sff_4mb: fix bad ifd path in configLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09coreboot/qemu_x86_12mb: re-add this mainboardLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09blobs/sources: fix backup links on some filesLeah Rowe
some files did not have backup links defined (the ones defined were the same as main links) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09use sha512sum to check downloads, not sha1sumLeah Rowe
sha-1 has known collision issues, which may not be readily exploitable yet (in our context), but we should ideally use a more secure method for checking file integrity. therefore, use sha-2 (sha512sum) for checking files. this is slower than sha-1, but checksum verification is only a minor part of what lbmk does, so the overall effect on build times is quite negligible. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09Merge pull request 'Add stm32-vserprog' (#129) from Riku_V/lbmk:stm32 into ↵Leah Rowe
master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/129
2023-09-09Add stm32-vserprogRiku Viitanen
Tested on a Nucleo-F042K6. That has an onboard stlink: `st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex` The usb port used for flashing is separate, its is exposed on the pin header instead. Check boards/nucleo-f042k6.h for usb pinout. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-09set grub.cfg timeout to 5s (10 on some boards)Leah Rowe
target.cfg can now specify e.g. grub_timeout=20 this would then be inserted as timeout.cfg in cbfs, containing the instruction: set timeout=20 HP laptops need a bit of extra time, due to the delay caused by the EC bug workaround deployed in GRUB desktops in general need extra time. this too is set to 10s, like the HP laptops. only insert timeout.cfg if actually needed (declared in target.cfg), otherwise grub.cfg will default to 5s Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-08Build for all pico board, not just the "original"Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Support multiple dependencies per projectRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-06grub: re-add module: playLeah Rowe
for example, the beep sound in debian's installer needs this module. the cute ding in the arch/artix menu also needs it Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-05grub: make backgrounds configurable in target.cfgLeah Rowe
now under coreboot mainboards, target.cfg can specify a background. if not specified, the 1280x800 one is assumed, and used by default. it can be overridden. the path should be relative to: config/grub/background/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04grub: remove xnu moduleLeah Rowe
this causes a saving of about 131KB uncompressed, when i tested. we don't need mach kernel support. nobody will ever use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04grub: remove legacy file system modulesLeah Rowe
this causes a 6.7% decrease in the payload size these file systems are microsoft(fat, ntfs) or mostly oldschool amiga and beos file systems also remove minix modules, and some old linux file systems that nobody will use in 2023 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04re-add grub modules cat, eval and pbkdf2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04move me7_update_parser.py to util/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04merge config/ and resources/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04move ifd/gbe configs into config/ifd/Leah Rowe
it doesn't really make sense for them to be under blobs/ - nominally, they are blobs, but they are well-understood data files containing config data, that is easily parsed by tools like ich9show or ifdtool (and tools like bincfg or nvmutil) blobs/ has been re-purposed: this directory no longer exists in lbmk, but it is created (and on .gitignore) when needed, by blobutil thus, the blobs/ directory shall only contain vendor files, and only those files that libreboot scrubs from releases. therefore, build/release/src can (and has been) simplified; it currently copies just the ifd and gbe files from blobs/, selectively, and this logic is quite error prone, requiring maintenance. now, the build/release/src script simply copies config/ (which only ever contains distributable files) and entirely ignores the blobs/ directory the blob download script already creates the required directory, except for the sch5545 download; this is now fixed lbmk code size is slightly smaller, due to this patch Signed-off-by: Leah Rowe <leah@libreboot.org>