summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2024-01-10NEW MAINBOARD: HP EliteBook 820 G2Leah Rowe
This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-31Bump GRUB to 2.12 releaseLeah Rowe
Actually, it's 2 commits after 2.12, because there was a patch added afterwards, fixing a build issue on Gentoo. These changes are present in GRUB 2.12, relative to the revision that we previously used on lbmk: * b835601c7 build: Include grub-core/extra_deps.lst in dist * 8961305b4 Bump version to 2.13 * 5ca9db22e Release 2.12 * 477a0dbd5 efi: Add support for reproducible builds * dcc1af5d6 efi: Generate stack protector canary at build time if urandom is available * e424e945c efi: Initialize canary to non-zero value * 7c8ae7dcb gfxmenu/gui_image: Fix double free of bitmap * 63fc253fc commands/acpi: Fix calculation of ACPI tables addresses when processing RSDT and XSDT * f20123072 libnvpair: Support prefixed nvlist symbol names as found on NetBSD * a13df3d15 bootstrap: Don't check gettext version * 6d2aa7ee0 kern/mm: Use %x and cast for displaying sizeof() * b3d49a697 configure: Add RPATH for freetype on NetBSD * 52dbf66ea configure: Add *BSD font paths * 2d6a89980 autogen: Accept python3.10 as a python alternative * 3d4cb5a43 build: Rename HAVE_LIBZFS to USE_LIBZFS * e4dbe5cfa gnulib: Tolerate always_inline attribute being ignored * 31e47cfe2 util/editenv: Don't use %m formatter * f5905f656 osdep/bsd/hostdisk: Fix NetBSD compilation * cb1824a87 osdep/generic/blocklist: Fix compilation * 2f3faf02c disk/diskfilter: Remove unused variable * 3815acc57 build: Tolerate unused-but-set in generated lexer/bison files * c129e44e7 loader/i386/bsdXX: Fix loading after unaligned module * 89fbe0cac grub-core/Makefile.am: Make path to extra_deps.lst relative to $(top_srcdir)/grub-core * 353beb80c util/grub-install: Move platdir path canonicalization after files were copied to grubdir * f18a899ab util/grub-mkstandalone: Ensure deterministic tar file creation by sorting contents * ed74bc376 util/grub-mkstandalone: Ensure stable timestamps for generated images * 069cc46c9 net/http: Fix gcc-13 errors relating to type signedness * e7a831963 templates: Reinstate unused version comparison functions with warning * 3f9eace2d util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated * e60015f57 efi: Set shim_lock_enabled even if validation is disabled * e35683317 docs: Improve bli module documentation * 57059ccb6 bli: Add explicit dependency on the part_gpt module * 154dcb1ae build: Allow explicit module dependencies * 17c68472d kern/ieee1275/init/ppc64: Display upper_mem_limit when debugging * 5f8e091b6 kern/ieee1275/init/ppc64: Fix a comment * dc569b077 kern/ieee1275/ieee1275: Display successful memory claims when debugging * 0ac3d938a loader/powerpc/ieee1275: Use new allocation function for kernel and initrd * 2a9a8518e kern/ieee1275/cmain/ppc64: Introduce flags to identify KVM and PowerVM * 679691a13 kern/ieee1275/init/ppc64: Rename regions_claim() to grub_regions_claim() * d49e86db2 kern/ieee1275/init/ppc64: Add support for alignment requirements * fe5d5e857 kern/ieee1275/init/ppc64: Return allocated address using context * ea2c93484 kern/ieee1275/init/ppc64: Decide by request whether to initialize region * 0bb59fa9a kern/ieee1275/init/ppc64: Introduce a request for regions_claim() * aa7c13226 fs/xfs: Add large extent counters incompat feature support Most notable in the above log, that are beneficial to Libreboot users, are: aa7c13226 which improves XFS support (large extents), which is default now on many setups. ed74bc376 which introduces more stable timestamp generation when using grub-mkstandalone. this is what lbmk uses to generate grub.elf, whereas grub previously only implemented this fix on mkimage which we don't use f18a899ab which ensures deterministic (reproducible) tar file creation by sorting contents (file names / directories). this is done by sorting the entries f5905f656 which improves grub build system reliability on netbsd and openbsd systems - useful for us because an ambition of lbmk is to port the build system to run on bsd systems, and we will still want grub - several other of the changes here are beneficial for BSD aswell, all or most of them by Vladimir Serbinenko Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: support custom make/autogen argumentLeah Rowe
this is now used in grub, for the FS_PAYLOAD_MODULES option in the make command lbmk should generalise as much logic as possible. in some parts of it, logic is hurrently hardcoded, specific to a given project that lbmk uses, but lbmk is essentially a source-based package manager, like what you might find on a small linux distro, so we need to try to be as generic as possible. lbmk is the "build system of build systems", so it has to work generically with as many of them as possible Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: generic cmake handlingLeah Rowe
it is no longer hardcoded just to be handled for uefiextract. it is now defined as cmakedir in target.cfg, for a single or multi tree project. if multi tree, it is applied to the specific tree, and has to be defined per tree the way it works is: as per cmakelist, a project will define which directory is to be built, and it will then generate a makefile in the main source tree (the build tree in cmake language, where the main CMakeLists.txt file exists) when the makefile has been generated, the project is then treated like any other project. the way cmake works, if a makefile has already been generated by it, in a given directory, running it again will fail and not affect anything; if it fails but the makefile doesn't exist, then something is wrong, but if the makefile does exist, then it's all fine and nothing happens at present, this is only used for uefiextract, which is part of src/uefitool Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: dont hardcode autoconf/bootstrap argLeah Rowe
at present, the bootstrap and configure script is only directly executed for grub, because grub is the only project that uses them in lbmk however, when i start adding linuxboot support, i will have to start building a lot of projects, some of which make use autoconf and bootstrap scripts e.g. ./bootstrap --foo ./configure --bar the "bootstrap" script is often used on GNU programs, because they like to over-engineer absolutely everything Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-28disable u-boot on x86 qemuLeah Rowe
it's not well-tested and currently doesn't build this is for later remove for now Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27update/trees: further simplify crossgcc handlingLeah Rowe
arch no longer needs to be set, on multi-tree projects, and it has been renamed to xarch the new behaviour is: if xarch is set, treat it as a list of crossgcc targets and go through the list. set the first one as the target, for what lbmk builds, but build all of the defined crossgccc targets crossgcc_ada is now xlang, and defines which languages to build, rather than whether to build gcc-gnat Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-25coreboot: update hp elitebook configsLeah Rowe
i had to run make-oldconfig on all of them, because of the port that riku added the other day. lbmk doesn't use defconfigs, it uses full configs, so we have to make sure they're kept in sync this patch is the result of running the following command in a fresh clone of lbmk: ./update trees -u coreboot i should probably switch to defconfigs. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24Add HP 8300 CMT portRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-24fix flashrom build error (implicit enum typecast)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revision againLeah Rowe
riku committed a new patch, that fixes build errors when PICO_DEFAULT_LED_PIN is not defined, on a given board. in such cases, riku's new patch just disables handling of the status LED, but LEDs continue to work on boards where it is defined. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revisionLeah Rowe
the new revision sets drive level to 12mA instead of the default 4mA. 16-20mA is the maximum tolerated level for data lines, on most flash ICs, so 12mA is relatively safe. riku did this a while ago, tested on pico pi. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23dell/e6400nvidia_4mb: new configuration (nvidia)Leah Rowe
the e6400_4mb target has libgfxinit and (if seabios) vgarom initialisation, but has issues on the nvidia model, even when using nomodeset. with this target, e6400nvidia_4mb, only the vgarom initialisation is used, libgfxinit is disabled. on nvidia models, this one should work a little bit better. specifically: nouveau crashes on this machine, with libreboot installed, but you can use nomodeset. however, when libgfxinit is also enabled, nomodeset no longer works properly. so this target disables all video initialisation in coreboot. only seabios will initialise anything video-related, by executing the vga option rom. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23don't delete microcode updates in rom imagesLeah Rowe
at present, lbmk can remove microcode updates on images for a given target, if the target specifies microcode_required="n" in target.cfg lbmk then provides images with microcode, and images without, in a given release. although the user can also remove them manually, this just makes it a bit more convenient, for those users who do wish to run without the updates. this functionality is provided only on those platforms where no-microcode is tested. well, this behaviour implements a compromise on libreboot policy, which is to always include microcode updates by default. see: Binary Blob Reduction Policy the *canoeboot* project now exists, developed in parallel with libreboot, and it ships without microcode updates, on the same targets where lbmk also handled this. running without microcode updates is foolish, and should not be encouraged. clean up lbmk by not providing this kludge. the libreboot documentation will be updated, telling such users to try canoeboot instead, or to remove the update from a given libreboot rom - this is still possible, and mitigations such as PECI disablement on GM45 are still in place (and will be kept), so that this continues to work well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21rename hp elitebook ec fw after rom familiesRiku Viitanen
this affects 8460p and 8470p only, as the others' updates aren't common across different boards Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21document hp laptop rom familiesRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21build/roms: remove modify_coreboot_rom()Leah Rowe
don't handle "romtype" at all, in board target.cfg files add /dev/null as pike2008 rom on amd boards. this serves the same purpose, adding them as empty vga roms, to add an empty rom in cbfs. pike2008 cards cause seabios to hang, when their oproms are executed, so we insert a fake rom on i945 thinkpads, use the coreboot config option: CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK when set, this enables the same bootblock copy, for use with bucts. these two cases, namely pike2008 roms and i945 bootblock copies, no longer need to be handled in code Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21hp8460pintel: actually enable vbtRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21update coreboot configsLeah Rowe
the x220 edp patch invalidated lots of configs, so i did: ./update trees -u coreboot this is the resulting patch Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees: simplified crossgcc handlingLeah Rowe
only call crossgcc for coreboot and u-boot, but use hostcc for everything else. simplify the checking of which architecture to compile for. "arch" in target.cfg files has been modified, to allow further simplification. without this patch, the logic currently only *barely* avoids using crossgcc on things like utils, and only works in practise because, in practise, lbmk only works on x86_64 anyway. the new logic, as per this patch, is simpler and more robust. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21Merge pull request 'config/ifd/xx30: Fix 16_ifd component density and count' ↵Leah Rowe
(#170) from nic3-14159/lbmk:xx30_16_ifd_fix into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/170
2023-12-20config/ifd/xx30: Fix 16_ifd component density and countNicholas Chin
The component 1 and 2 densities were still set to 8 MiB and 4 MiB respectively, which is incorrect for 16 MiB only configurations. Change the component 1 density to 16 MiB so that the address space gets properly mapped to SPI 1. In addition, change the number of components field (byte 0x15) to 0x00 to indicate 1 flash chip. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-12-19Add HP EliteBook 8460pRiku Viitanen
Inside the BIOS update, there's 68SCE and 68SCF variants. Based on Qubes HCL and browsing linux-hardware.org, these are Probook 6360b and Elitebook 8460p respectively. I checked the KBC1126 EC Firmwares within the update file, both use the exact same firmware images. Following-up will be a very similar but untested port for 6360b. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-18grub.cfg syslinux: support scanning /boot/EFI/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: fix pathLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle btrfs subvols for extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan extlinux/extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: support grub and extlinux on ata/ahciLeah Rowe
there are special menuentries just for loading configs, without handling luks, lvm and whatnot. it's intended for users of cd/dvd drives. well, now we support both extlinux and grub, with this patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: merge isolinux/grub usb menuentriesLeah Rowe
many modern distros use grub in their installer images, so scan for grub.cfg first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle extlinux in the default menuentryLeah Rowe
isolinux/syslinux/extlinux config files should all work, using the syslinux parser function in grub the current behaviour is to only search for grub.cfg, so extlinux users can't use the default libreboot setup. with this change, their systems should hopefully work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg syslinux: support ESP and extlinux.confLeah Rowe
the so-called EFI System Partition (ESP) is used on many UEFI-based setups. some users may be migrating to libreboot, so let's support it. on BIOS setups, it would be e.g. /boot/syslinux/syslinux.conf on UEFI setups, it would be e.g. /boot/EFI/syslinux/syslinux.conf additionally, support scanning for extlinux.conf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: don't boot linux without a grub.cfgLeah Rowe
the fallback code in the main menuentry is potentially unsafe, depending on user config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan lvm volumes lastLeah Rowe
lvm/* is slow to resolve in grub, on some machines, because grub enumeration is very slow in general. however, many people will install distros with any number of lvm configurations, so we should try to support them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Revert "grub.cfg: try luks2/crypto-lvm before non-crypto"Leah Rowe
This reverts commit 20389655e42e62ebf6d96dd106c91fbe74282557. If the user actually has encryption, but has /boot unencrypted, this will considerably slow down the boot, so the patch has been reverted. The patch was originally meant to favour encrypted /boot setups, but the old behaviour also still works there.
2023-12-18grub.cfg: try luks2/crypto-lvm before non-cryptoLeah Rowe
when the user sets up an encrypted machine, grub.cfg defaults to non-encrypted setups if found, first this patch reverses the order, deferring to non-encrypted installations only when encrypted ones are unavailable Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Merge pull request 'master' (#165) from risapav/lbmk:master into masterLeah Rowe
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/165
2023-12-18Update config/grub/config/grub.cfgsemigel
grub.cfg: add BTRFS subvol support
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-11config/dependencies/debian: add unifont-bin & xfonts-unifontRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: openssl-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: freetype-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies typoRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-11-22revert flashrom back to version 1.2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-15dependencies/debian: fix libfreetype-devLeah Rowe
install libfreetype-dev, instead of libfreetype6-dev this still works in debian stable (currently 12.2) but fixes debian sid, as of 15 November 2023. my test machine with debian sid could not install libfreetype6-dev, but could install libfreetype-dev Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-13grub: re-add fat/nt file system modulesLeah Rowe
apparently some people use fat file systems for /boot on linux systems this is apparently a thing it's ridiculous, but also a thing a user reported they could not boot their t400 because of those, because they have such a distro installed on their machine apparently it was a gentoo user i don't really care. re-add 1980s dos file system support. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-09Bump GRUB revision to 8 November 2023 revisionLeah Rowe
Now the revision is: 64e3cee72ab8f5876abfebb263b5e6cf7c4a9a4e The old revision was: e58b870ff926415e23fc386af41ff81b2f588763 With this new revision update, the following patches have been imported from the upstream GRUB project: * 64e3cee72 gpt: Add compile time asserts for guid and gpt_partentry sizes * 7de6fe963 types: Split aligned and packed guids * 5fc985bfd gpt_partition: Mark grub_gpt_partentry as having natural alignment * 7ad30299d efi: Deduplicate configuration table search function * c6cf807fc lsefi: Add missing static qualifier * a964e359b types: Fix typo * 3f79e3b15 util/grub-mount: Check file path sanity * 85e40b36e configure: Make the DJVU_FONT_SOURCE configurable with --with-dejavufont=FILE * 2d6631d2a configure: Make the Unifont FONT_SOURCE configurable with --with-unifont=FILE * 07318ee7e fs/xfs: Fix XFS directory extent parsing * ad7fb8e2e fs/xfs: Incorrect short form directory data boundary check * 4e10213de Revert "zfsinfo: Correct a check for error allocating memory" * 4266fd2bb disk/i386/pc/biosdisk: Read up to 63 sectors in LBA mode * cab04dcda kern/i386/pc/init: Flush cache only on VIA C3 and earlier * 3c7e84257 fs/btrfs: Zero file data not backed by extents * 4bcf6f747 kern/ieee1275/init: Restrict high memory in presence of fadump on ppc64 * cf58eca2a tests/util/grub-shell: Enable RNG device to better test stack smashing * c3bdf263f kern/efi/init: Disable stack smashing protection on grub_efi_init() * 95963d97f disk/cryptodisk: Add support for LUKS2 in (proc)/luks_script * 016f14257 disk/cryptodisk: Optimize luks_script_get() * f7a663c00 term/serial: Ensure proper NULL termination after grub_strncpy() * a19e47ca4 commands/efi/lsefisystab: Print the UEFI specification revision in human readable form Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06add grub mods: diskfilter,hashsum,loadenv,setjmpLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06re-add grub modules: f2fs, json, read, scsi, sleepLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>