summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2023-12-28disable u-boot on x86 qemuLeah Rowe
it's not well-tested and currently doesn't build this is for later remove for now Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27update/trees: further simplify crossgcc handlingLeah Rowe
arch no longer needs to be set, on multi-tree projects, and it has been renamed to xarch the new behaviour is: if xarch is set, treat it as a list of crossgcc targets and go through the list. set the first one as the target, for what lbmk builds, but build all of the defined crossgccc targets crossgcc_ada is now xlang, and defines which languages to build, rather than whether to build gcc-gnat Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-25coreboot: update hp elitebook configsLeah Rowe
i had to run make-oldconfig on all of them, because of the port that riku added the other day. lbmk doesn't use defconfigs, it uses full configs, so we have to make sure they're kept in sync this patch is the result of running the following command in a fresh clone of lbmk: ./update trees -u coreboot i should probably switch to defconfigs. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24Add HP 8300 CMT portRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-24fix flashrom build error (implicit enum typecast)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revision againLeah Rowe
riku committed a new patch, that fixes build errors when PICO_DEFAULT_LED_PIN is not defined, on a given board. in such cases, riku's new patch just disables handling of the status LED, but LEDs continue to work on boards where it is defined. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revisionLeah Rowe
the new revision sets drive level to 12mA instead of the default 4mA. 16-20mA is the maximum tolerated level for data lines, on most flash ICs, so 12mA is relatively safe. riku did this a while ago, tested on pico pi. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23dell/e6400nvidia_4mb: new configuration (nvidia)Leah Rowe
the e6400_4mb target has libgfxinit and (if seabios) vgarom initialisation, but has issues on the nvidia model, even when using nomodeset. with this target, e6400nvidia_4mb, only the vgarom initialisation is used, libgfxinit is disabled. on nvidia models, this one should work a little bit better. specifically: nouveau crashes on this machine, with libreboot installed, but you can use nomodeset. however, when libgfxinit is also enabled, nomodeset no longer works properly. so this target disables all video initialisation in coreboot. only seabios will initialise anything video-related, by executing the vga option rom. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23don't delete microcode updates in rom imagesLeah Rowe
at present, lbmk can remove microcode updates on images for a given target, if the target specifies microcode_required="n" in target.cfg lbmk then provides images with microcode, and images without, in a given release. although the user can also remove them manually, this just makes it a bit more convenient, for those users who do wish to run without the updates. this functionality is provided only on those platforms where no-microcode is tested. well, this behaviour implements a compromise on libreboot policy, which is to always include microcode updates by default. see: Binary Blob Reduction Policy the *canoeboot* project now exists, developed in parallel with libreboot, and it ships without microcode updates, on the same targets where lbmk also handled this. running without microcode updates is foolish, and should not be encouraged. clean up lbmk by not providing this kludge. the libreboot documentation will be updated, telling such users to try canoeboot instead, or to remove the update from a given libreboot rom - this is still possible, and mitigations such as PECI disablement on GM45 are still in place (and will be kept), so that this continues to work well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21rename hp elitebook ec fw after rom familiesRiku Viitanen
this affects 8460p and 8470p only, as the others' updates aren't common across different boards Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21document hp laptop rom familiesRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21build/roms: remove modify_coreboot_rom()Leah Rowe
don't handle "romtype" at all, in board target.cfg files add /dev/null as pike2008 rom on amd boards. this serves the same purpose, adding them as empty vga roms, to add an empty rom in cbfs. pike2008 cards cause seabios to hang, when their oproms are executed, so we insert a fake rom on i945 thinkpads, use the coreboot config option: CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK when set, this enables the same bootblock copy, for use with bucts. these two cases, namely pike2008 roms and i945 bootblock copies, no longer need to be handled in code Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21hp8460pintel: actually enable vbtRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-21update coreboot configsLeah Rowe
the x220 edp patch invalidated lots of configs, so i did: ./update trees -u coreboot this is the resulting patch Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees: simplified crossgcc handlingLeah Rowe
only call crossgcc for coreboot and u-boot, but use hostcc for everything else. simplify the checking of which architecture to compile for. "arch" in target.cfg files has been modified, to allow further simplification. without this patch, the logic currently only *barely* avoids using crossgcc on things like utils, and only works in practise because, in practise, lbmk only works on x86_64 anyway. the new logic, as per this patch, is simpler and more robust. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21Merge pull request 'config/ifd/xx30: Fix 16_ifd component density and count' ↵Leah Rowe
(#170) from nic3-14159/lbmk:xx30_16_ifd_fix into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/170
2023-12-20config/ifd/xx30: Fix 16_ifd component density and countNicholas Chin
The component 1 and 2 densities were still set to 8 MiB and 4 MiB respectively, which is incorrect for 16 MiB only configurations. Change the component 1 density to 16 MiB so that the address space gets properly mapped to SPI 1. In addition, change the number of components field (byte 0x15) to 0x00 to indicate 1 flash chip. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-12-19Add HP EliteBook 8460pRiku Viitanen
Inside the BIOS update, there's 68SCE and 68SCF variants. Based on Qubes HCL and browsing linux-hardware.org, these are Probook 6360b and Elitebook 8460p respectively. I checked the KBC1126 EC Firmwares within the update file, both use the exact same firmware images. Following-up will be a very similar but untested port for 6360b. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-18grub.cfg syslinux: support scanning /boot/EFI/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: fix pathLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle btrfs subvols for extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan extlinux/extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: support grub and extlinux on ata/ahciLeah Rowe
there are special menuentries just for loading configs, without handling luks, lvm and whatnot. it's intended for users of cd/dvd drives. well, now we support both extlinux and grub, with this patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: merge isolinux/grub usb menuentriesLeah Rowe
many modern distros use grub in their installer images, so scan for grub.cfg first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle extlinux in the default menuentryLeah Rowe
isolinux/syslinux/extlinux config files should all work, using the syslinux parser function in grub the current behaviour is to only search for grub.cfg, so extlinux users can't use the default libreboot setup. with this change, their systems should hopefully work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg syslinux: support ESP and extlinux.confLeah Rowe
the so-called EFI System Partition (ESP) is used on many UEFI-based setups. some users may be migrating to libreboot, so let's support it. on BIOS setups, it would be e.g. /boot/syslinux/syslinux.conf on UEFI setups, it would be e.g. /boot/EFI/syslinux/syslinux.conf additionally, support scanning for extlinux.conf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: don't boot linux without a grub.cfgLeah Rowe
the fallback code in the main menuentry is potentially unsafe, depending on user config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan lvm volumes lastLeah Rowe
lvm/* is slow to resolve in grub, on some machines, because grub enumeration is very slow in general. however, many people will install distros with any number of lvm configurations, so we should try to support them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Revert "grub.cfg: try luks2/crypto-lvm before non-crypto"Leah Rowe
This reverts commit 20389655e42e62ebf6d96dd106c91fbe74282557. If the user actually has encryption, but has /boot unencrypted, this will considerably slow down the boot, so the patch has been reverted. The patch was originally meant to favour encrypted /boot setups, but the old behaviour also still works there.
2023-12-18grub.cfg: try luks2/crypto-lvm before non-cryptoLeah Rowe
when the user sets up an encrypted machine, grub.cfg defaults to non-encrypted setups if found, first this patch reverses the order, deferring to non-encrypted installations only when encrypted ones are unavailable Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Merge pull request 'master' (#165) from risapav/lbmk:master into masterLeah Rowe
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/165
2023-12-18Update config/grub/config/grub.cfgsemigel
grub.cfg: add BTRFS subvol support
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-11config/dependencies/debian: add unifont-bin & xfonts-unifontRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: openssl-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies: freetype-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02fix void dependencies typoRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-11-22revert flashrom back to version 1.2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-15dependencies/debian: fix libfreetype-devLeah Rowe
install libfreetype-dev, instead of libfreetype6-dev this still works in debian stable (currently 12.2) but fixes debian sid, as of 15 November 2023. my test machine with debian sid could not install libfreetype6-dev, but could install libfreetype-dev Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-13grub: re-add fat/nt file system modulesLeah Rowe
apparently some people use fat file systems for /boot on linux systems this is apparently a thing it's ridiculous, but also a thing a user reported they could not boot their t400 because of those, because they have such a distro installed on their machine apparently it was a gentoo user i don't really care. re-add 1980s dos file system support. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-09Bump GRUB revision to 8 November 2023 revisionLeah Rowe
Now the revision is: 64e3cee72ab8f5876abfebb263b5e6cf7c4a9a4e The old revision was: e58b870ff926415e23fc386af41ff81b2f588763 With this new revision update, the following patches have been imported from the upstream GRUB project: * 64e3cee72 gpt: Add compile time asserts for guid and gpt_partentry sizes * 7de6fe963 types: Split aligned and packed guids * 5fc985bfd gpt_partition: Mark grub_gpt_partentry as having natural alignment * 7ad30299d efi: Deduplicate configuration table search function * c6cf807fc lsefi: Add missing static qualifier * a964e359b types: Fix typo * 3f79e3b15 util/grub-mount: Check file path sanity * 85e40b36e configure: Make the DJVU_FONT_SOURCE configurable with --with-dejavufont=FILE * 2d6631d2a configure: Make the Unifont FONT_SOURCE configurable with --with-unifont=FILE * 07318ee7e fs/xfs: Fix XFS directory extent parsing * ad7fb8e2e fs/xfs: Incorrect short form directory data boundary check * 4e10213de Revert "zfsinfo: Correct a check for error allocating memory" * 4266fd2bb disk/i386/pc/biosdisk: Read up to 63 sectors in LBA mode * cab04dcda kern/i386/pc/init: Flush cache only on VIA C3 and earlier * 3c7e84257 fs/btrfs: Zero file data not backed by extents * 4bcf6f747 kern/ieee1275/init: Restrict high memory in presence of fadump on ppc64 * cf58eca2a tests/util/grub-shell: Enable RNG device to better test stack smashing * c3bdf263f kern/efi/init: Disable stack smashing protection on grub_efi_init() * 95963d97f disk/cryptodisk: Add support for LUKS2 in (proc)/luks_script * 016f14257 disk/cryptodisk: Optimize luks_script_get() * f7a663c00 term/serial: Ensure proper NULL termination after grub_strncpy() * a19e47ca4 commands/efi/lsefisystab: Print the UEFI specification revision in human readable form Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06add grub mods: diskfilter,hashsum,loadenv,setjmpLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06re-add grub modules: f2fs, json, read, scsi, sleepLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06Merge pull request 'Dell Latitude E6530 support' (#151) from ↵Leah Rowe
nic3-14159/lbmk:e6530 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/151
2023-11-05config/coreboot/e6430_12mb: Fix configsNicholas Chin
Fix a few issues with the E6430 configs to make it consistent with configs for other boards and function as intended. - Add VBT to CBFS: Although the VBT was enabled at the board level Kconfig in a previous commit (CONFIG_INTEL_GMA_HAVE_VBT), the config to actually add the VBT to CBFS was still unset. - Enable the static option table: The old config would always use the fallback values hard coded in the coreboot tree, rather than the settings in the cmos.default file - Enable DRAM clear on boot: This was not set previously, even though most other boards set this for security. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-05Add Dell Latitude E6530 supportNicholas Chin
This is pretty much the same as the E6430 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-05config/ifd: Rename e6430 to dell_ivybridgeNicholas Chin
This is to support future patches for other Ivy Bridge Dell Latitudes. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-11-06Libreboot 2023110620231106Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>