summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2024-06-08git.sh: support downloading *files* as submodulesLeah Rowe
when we download coreboot, we currently don't have a way to download crossgcc tarballs, so we rely on coreboot to do it, which means running the coreboot build system to do it; which means we don't get them in release archives, unless we add very hacky logic (which did exist and was removed). the problem with coreboot's build system is that it does not define backup links for each given tarball, instead relying on gnu.org exclusively, which seems OK at first because the gnu.org links actually return an HTTP 302 response leading to a random mirror, HOWEVER: the gnu.org 302 redirect often fails, and the download fails, causing an error. a mitigation for this has been to patch the coreboot build system to download directly from a single mirror that is reliable (in our case mirrorservice.org). while this mitigation mostly works, it's not redundant; the kent mirror is occasionally down too, and again we still have the problem of not being able to cleanly provide crossgcc tarballs inside release archives. do it in config/submodules, like so: module.list shall say the relative path of a given file, once downloaded, relative to the given source tree. module.cfg shall be re-used, in the same way as for git submodules, but: subfile="url" subfile_bkup="backup url" do this, instead of: subrepo="url" subrepo_bkup="backup url" example entries in module.list: util/crossgcc/tarballs/binutils-2.41.tar.xz util/crossgcc/tarballs/gcc-13.2.0.tar.xz util/crossgcc/tarballs/gmp-6.3.0.tar.xz util/crossgcc/tarballs/mpc-1.3.1.tar.gz util/crossgcc/tarballs/mpfr-4.2.1.tar.xz util/crossgcc/tarballs/nasm-2.16.01.tar.bz2 util/crossgcc/tarballs/R06_28_23.tar.gz the "subrev" variable (in module.cfg) has been renamed to "subhash", so that this makes sense, and that name is common to both subfile/subrepo. the download logic from the vendor scripts has been re-used for this purpose, and it verifies files using sha512sum. therefore: when specifying subrepo(git submodule), subhash will still be a sha1 checksum, but: when specifying subfile(file, e.g. tarball), subhash will be a sha512 checksum the logic for both (subrepo and subfile) is unified, and has this rule: subrepo* and subfile* must never *both* be declared. the actual configuration of coreboot crossgcc tarballs will be done in a follow-up commit. this commit simply modifies the code to accomodate this. over time, this feature could be used for many other files within source trees, and could perhaps be expanded to allow extracting source tarballs in leiu of git repositories, but the latter is not yet required and thus not implemented. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07move uefiextract to elf/uefitool/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07Add dependency scripts for Fedora 40 and Ubuntu 24.04fuel-pcbox
2024-06-07define mdfiles/images in config/submodules/docs/Leah Rowe
again: the "depend" variable must never be used for subprojects that point to a subdirectory of the main project, because there's no clean way of handling this in case of error conditions. make it a submodule under config/submodules/. this is for the documentation, including static site generator documentation, and image files (photos). as of this revision, there are now only those "depend" projects defined in config/git/, where the destination directory of the subject is not a subdirectory of the main project, so: in a subsequest revision, i will mitigate an existing bug whereby failure of the dependency project leaves the main one still intact, breaking builds; this revision enables that to be done. from now on, subproject-to-subdirectory-of-main-project will be avoided in config/git/; config/submodules/ will be used. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07libopencm3 to config/submodules/ on stm32-vserprogLeah Rowe
same as the previous patch, we must no longer use "define" variables in config/git/ when the path is a subdirectory of a given project, because it means that the download can only happen after the main one, and currently if that fails, the download of the main repo would remain intact, breaking future builds in ways that we can't control - to be clear, it could be controlled, but with added code complexity in the build system, so: put it in config/submodules/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07add tinyusb to config/submodule/ for pico-sdkLeah Rowe
don't define it as a "depend" variable in config/git/, because it means putting the files in a subdirectory of an existing project was was already then downloaded, and that means it can't be downloaded first; if the download of it fails, the old download is left intact. this bug isn't currently fixed in the build system, at all, so this and other patches are being made to mitigate it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07config/git: use "depend" for serprog dependenciesLeah Rowe
this brings the handling of serprog projects in sync with canoeboot, which relies on the "depend" variable to get the needed submodules, because cbmk does not download submodules for these projects lbmk does download submodules. i want it in sync with cbmk for this, to make merging easier between both projects, because i'm going to make a change on both projects, whereby config/submodules/ is used exclusively Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06put memtest86plus builds in elf/memtest86plus/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06put flashprog builds in elf/flashprog/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06handle build.list from config/data/, not config/Leah Rowe
certain code checks for build.list, to skip it, for example in items() we already use config/data/grub to store grub config data that applied to all trees create these directories too: config/data/coreboot config/data/u-boot config/data/seabios move the respective build.list files in here, and also to config/data/grub now multi-tree projects contain, per directory, just the target.cfg file and the patches directory. this is much cleaner, because some of the logic can be simplified more Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision againLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision in git configLeah Rowe
it imports the same environmental variable fix because i had the same buggy TMPDIR check there. i fixed that upstream in untitled. import the new untitled revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01u-boot on qemu: remove currently unused x86 targetLeah Rowe
it doesn't build, at present, but isn't used by any coreboot targets, so the build issue does not come up during release builds, but i did find it laying around during my audits. x86 qemu is on todo for libreboot, on all x86 boards, but the current config is broken, so: remove it. it's very much a requirement that anything in lbmk should work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan /boot/grub.cfg lastLeah Rowe
very unlikely to exist. in fact, should i remove it? Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan grub2/ lastLeah Rowe
it's very unlikely that someone would use this directory name nowadays, and i had half a mind to remove it altogether Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: search a reduced list of devs/partitionsLeah Rowe
in practise, the machines we support don't have the option of including so many disks; 8 seems like the most reasonable default. additionally, it's unreasonable to expect *20 partitions* this hardcoding is done to avoid using *, which is slow in grub on some machines (the grub kernel always re-enumerates the devices during every operation, without caching any of it) yet, the hardcoding is also slow; balance it a bit better by searching fewer permutations, but not so few that it would likely break a lot of setups Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan grub.cfg from ESPLeah Rowe
we already supported syslinux but not grub support grub by scanning for the most common paths, based on the most popular distros we don't hardcode this with * because it slows down the boot, and in practise many distros still use the same grub.cfg location as in BIOS systems (the EFI one is often just a link to the BIOS one) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: split up try_user_configLeah Rowe
in the next revision, i will add ESP paths Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: don't search for *_grub.cfgLeah Rowe
this is a relic from the old days when we didn't automated the grub.cfg logic as much. these days, the grub.cfg logic is able to boot almost all distros without any manual intervention or override. removing these entries will speed up the boot in general Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: remove unnecessary path for isolinuxLeah Rowe
the path "/boot/EFI" is unnecessary because the ESP is always a FAT32 partition, so we don't need to scan it as a subdirectory within a subdirectory. the ESP is always mounted as its own partition, FAT32, and EFI/ is always at the root of it Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: don't scan EFI on btrfs subvolsLeah Rowe
the esp is always a fat32 partition so this makes no sensgrub.cfg: don't scan EFI on btrfs subvols the esp is always a fat32 partition so this makes no sense Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01Merge pull request 'Fix building vboot on i686' (#218) from ↵Leah Rowe
lukeshu/lbmk:lukeshu/i686 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/218
2024-05-30Fix building vboot on i686Luke T. Shumaker
2024-05-30delete u-boot test/lib/strlcat.c using nuke()Leah Rowe
we don't need to do it in the release function Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29coreboot t440p/w541: enable nvme in grub_scan_diskLeah Rowe
these laptops do not officially have nvme slots on them, but there is an ngff wifi slot which is PCI-E x1, and you can use a special adapter on it to run nvme ssds. total throughput is retarded by the x1 PCI-E configuration, but it's still faster than a sata ssd (nvmes are x4 PCI-E). support it in grub_scan_disk on the off chance that some users may make use of this. it should work just fine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29do not allow dashes in coreboot target namesLeah Rowe
Command: ./vendor download kcma-d8-rdimm_16mb Output was: include/lib.sh: line 115: kcma-d8-rdimm=config/vendor: No such file or directory That will have to be audited later on, but the recent more stringent error checking in vendor.sh triggered this previously untriggered error message. The error was in fact already occuring before, silently. Anyway, mitigate by renaming all coreboot targets so that they do not contain hyphens in the name. This should avoid triggering errors in that eval command, on line 115 in lib.sh Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28grub.cfg: actually support setting boot orderLeah Rowe
replace variables ahcidev/atadev/nvmedev with a single one named bootdev the for loop goes through grub_scan_disk, so now it is effectively a bootorder configuration Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27grub.cfg: add spdx headerLeah Rowe
it has always been gpl 3 or later, but it helps to have the license declaration within the file there's a copying file anyway. put spdx in the config Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27re-configure grub_scan_disk on various targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27remove grub_scan_disk in all target.cfg filesLeah Rowe
A subsequest revision will set them again as needed, per coreboot target. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27grub.cfg: use grub_scan_disk to set boot orderLeah Rowe
Previously, grub_scan_disk could set ata, ahci or "both", which would make both be tried (ahci first). This worked when we only dealt with ata and ahci devices, but now we support nvme devices so the logic is inherently flawed. Instead, use grub_scan_disk to store the boot order, e.g.: grub_scan_disk="ahci nvme ata" grub_scan_disk="nvme ata" In the first example, it would make GRUB scan ahci first, then nvme and then ata. In the secontd example, it would make GRUB scan nvme first, and then ata. If "both" is set, or anything other than ahci/ata/nvme, grub_scan_disk is now changed to "nvme ahci ata". Actual grub_scan_disk entries in target.cfg files will now be modified, to match each machine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27GRUB: remove XHCI patches for now (will re-add)Leah Rowe
Fixes this bug: https://codeberg.org/libreboot/lbmk/issues/216 Well, fix is the wrong word. We want xHCI ideally. Mate is working on it as I write this. I've also: * Disabled CONFIG_FINALIZE_USB_ROUTE_XHCI on Haswell boards (coreboot) * Disabled the GRUB payload on HP 820 G2 for now We will need to re-add the xHCI patches once fixed. If Mate/we can't fix it, I'll contact Patrick Rudolph who originally wrote the xHCI patches. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27coreboot: only run GRUB as a secondary payloadLeah Rowe
See: https://codeberg.org/libreboot/lbmk/issues/216 Almost all users will be OK running GRUB, but a minority of users have experienced a fatal error pertaining to grub_free() or grub_realloc() (as my investigation of GRUB sources reveal when grepping the error reported in the link above). We don't yet know what the bug is, only that the error occurs, leading to an effective brick if the user has GRUB as their primary payload. So far, it has only been reported on some Intel SandyBridge-based Dell Latitudes in Libreboot, but we can't be too sure. The user reported that memtest86+ passes just fine, and SeaBIOS works; BIOS GRUB also works, which means that the bug is likely only in an area of GRUB that runs specifically on the coreboot payload, so it's probably a driver in GRUB when running on the metal rather than BIOS/UEFI. The build system supports a configuration whereby SeaBIOS is the primary payload, but GRUB is available in the SeaBIOS boot select menu, and an additional configuration is available where GRUB is what SeaBIOS executes first (while still providing boot select); both of these are now the *only* configurations available, on all x86 targets except QEMU. The QEMU target is fine because if the bug occurs there, you can just close QEMU and try a different image. Even after this bug is later identified and fixed, the GRUB source code is vastly over-engineered and there are likely many more such bugs. SeaBIOS is a reliable payload; the code is small and robust. Remember always: Code equals bugs Therefore, this configuration change is likely going to be permanent. This will apply in the next release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26flashprog: bump to 5b4fdd1 from 2 May 2024Leah Rowe
I've rebased the workaround-mx patch as follows. See: commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4 Author: Nico Huber <nico.h@gmx.de> Date: Fri Jan 13 01:19:07 2023 +0100 Let the flash context directly point to the used master This change, now upstream in flashprog, made me have to do this in the patch. I changed this: flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf); to this: flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf); It should work fine. This update imports the following upstream patches from flashprog: * 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347 * 72c9e40 meson: Check for CPU families with known raw mem access * 3458220 platform/meson: Port pciutils/pci.h workaround to Meson * f279762 platform/meson: Check for libi386 on NetBSD * 14da5f7 README: Convert to Markdown * 8ddea57 README: Document branching and release policy * 2522456 util/list_yet_unsupported_chips.sh: Fix path * cbf9c11 spi: Don't cross 16MiB boundaries with long writes * 823a704 dediprog: Skip warning on first attempt to read device string * e8463c8 dediprog: Revise prefix check for given programmer id * 38af1a1 dediprog: Revise id matching * 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting * cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting * 7679b5c spi25: Replace spi_read_chunked() with more abstract version * ca1c7fd spi25: Normalize parameters of spi_nbyte_read() * e36e3dc dediprog: Use default_spi_write_256 * 522a86d linux_spi: Use default_spi_read()/_write_256() * 806509b cli_classic: Turn progress reporting into a progress bar * 842d678 libflashrom: Return progress state to the library user * aa714dd flashprog.c: Let select_erase_functions() return byte count * 2eed4cf serprog: Add SPI Mode and CS Mode commands * 821a085 dediprog: Implement id reading for SF600 and later * 274e655 dediprog: Read device string early * 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2 * fb176d2 dediprog: Use more general 4BA write mode for newer protocols * 0ab5c3d dediprog: Split device type and version parsing * bdef5c2 dediprog: Use unsigned conversions to parse device string * 5262e29 dediprog: Try to request 32B device string (instead of 16B) * e76e21f dediprog: Get rid of some unnecessary hex constants * 5a09d1e udelay: Lower the sleep vs delay threshold * 03ad4a4 linux_mtd: Provide no-op delay implementation * 211c6ec serprog: Refine flushing before synchronization * 383b7fe serprog: Test synchronicity before trying to synchronize * d7318ea serprog: Move synchronicity test into separate function * 9a11cbf Let the flash context directly point to the used master * aabb3e0 writeprotect: Hook wp functions into the chip driver * 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode` * 929d2e1 internal: Pass programmer context down into chipset enables * 7c717c3 internal: Pass programmer context down into board enables * e3a2688 Pass programmer context to programmer->init() * 2b66ad9 Start implementing struct flashprog_programmer * 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME * b197402 memory_bus: Split register mapping into own function * 0e76d99 memory_bus: Move (un)map_flash_region into par master * 9eec407 Perform default mapping only for respective chips * 56b53dd wbsio_spi: Request memory mapping locally * 5596190 it87spi: Request memory mapping locally * 46449b4 spi25: Drop stale `bus == SPI` guards * ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook * 901fb95 Add prepare/finish_access() hooks for chip drivers * a96aaa3 dediprog: Support long writes of 16MiB and more * 1338936 Consider 4BA support when filtering erase functions * 8d36db6 flashprog.8: Fix up serprog example * d2ac303 flashprog.8: document new serprog cs parameter * d1b9153 chipset_enable.c: Add Genoa to mendocino entry Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24config: add backup coreboot submodule repositoriesLeah Rowe
this is using the same functionality that was added a few commits ago, to override the use of "git submodule update" each coreboot submodule has two repositories defined, with the second one kicking in if the mail one fails upon cloning. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24coreboot/default: remove chromeec from module.listLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24coreboot: only download the necessary submodulesLeah Rowe
whitelist what modules are downloaded, by adding module.list files in the corresponding directories under config/submodule/, per each coreboot tree. this is making use of functionality added in the previous commit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21Fix E6400 display reference clock patchesNicholas Chin
The ones I submitted before seem to have been outdated ones that don't actually build properly. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-21fix building coreboot images on i686 hostsLeah Rowe
firstly, memtest86+ is currently not cross compiled and relies on 64-bit headers (x86_64 only). a 32-bit distro is unlikely to be able to build 64-bit binaries. secondly: vboot throws a build error due to -Werror when building on 32-bit hosts. we rely on vboot code to build cbfstool, so turn off -Werror on vboot that's all. 32-bit hosts are not recommended; it is assumed that you are building on an x86_64 host. work will go into the build system at a later date to make it more portable, by cross compiling everything, but this should fix 32-bit for now. there are some x60/t60 users who still want to build roms, so let's allow them that possibility. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21Merge pull request 'Also try unlocking encrypted volume on NVMe' (#213) from ↵Leah Rowe
mkukri/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/213
2024-05-21Also try unlocking encrypted volume on NVMeMate Kukri
2024-05-21Merge pull request 'Add NVMe support to GRUB2 payload' (#212) from ↵Leah Rowe
mkukri/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/212
2024-05-21Merge pull request 'Fix E6400 display issue with 1440 x 900 panel' (#211) ↵Leah Rowe
from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/211
2024-05-21Merge pull request 'Add pt qwerty keymap to lbmk' (#210) from ↵Leah Rowe
samuraikid/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/210
2024-05-20Add NVMe support to GRUB2 payloadMate Kukri
Tested on OptiPlex 3050 (via injecting grub2.elf into WIP coreboot port).
2024-05-20Fix E6400 display issue with 1440 x 900 panelNicholas Chin
The E6400 uses a 100 MHz reference clock on DPLL_REF_SSCLK, whereas libgfxinit assumed that the reference was always 96 MHz. The frequency difference caused by a 100 MHz reference with PLL config values calculated assuming a 96 MHz reference were not significant enough to cause noticable issues with the more common 1280 x 800 panels, but are enough to matter for the 1440 x 900 panels which use a higher pixel clock. This only affected the pre-OS graphics environment provided by libgfxinit, as Linux drivers would determine the reference clock frequency based on data in the VBT. Fix this by making the reference clock frequency in libgfxinit configurable for GM45 based on a new coreboot Kconfig, which is set to 100 MHz for the E6400. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-20git.sh: allow patching submodulesLeah Rowe
for single-tree project (e.g. flashprog): config/submodule/PROJECT/MODNAME/patches for multi-tree project (e.g. coreboot): config/submodule/PROJECT/TREE/MODNAME/patches MODNAME is e.g.: 3rdparty/vboot directory in coreboot: would become vboot (the submodule codepath is filtered to up to the final slash) another example: submodire src dir 3rdparty/foo/bar MODNAME would be "bar" Add whatever patches you like to a given submodule. An example patch is included in this commit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18Add pt qwerty keymap to lbmksamuraikid
Signed-off-by: samuraikid <samuraikid@noreply.codeberg.org>
2024-05-12disable x301 for next release (for now)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>