summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
2023-10-20config/git: don't download flashromLeah Rowe
it's not actually needed in lbmk flashrom can be downloaded separately by the user, if they want to flash their chip Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20git/config stm32-vserprog: don't fetch libopencm3Leah Rowe
it's downloaded by .gitmodules in stm32-vserprog Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: remove rpi-pico-tinyusb dependencyLeah Rowe
it's now downloaded automatically as a submodule, when downloading pico-sdk (which defines this module) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: give pico-sdk its own fileLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/trees: don't run make if mode=fetchLeah Rowe
this fixes a regression caused by a previous revision Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20consistent naming for src/pico-serprogLeah Rowe
don't ever name it rpi-pico-serprog Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: name files per download nameLeah Rowe
don't put multiple downloads in the same files, except when they are dependencies that go inside the directory of another download. by doing this, the following functionality will become possible: clean every project or build every project, or maybe fetch every project, based entirely on the names of these files. this will be used later to simplify the release script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20do a nice thingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20Merge pull request 'fix_distro_dependencies - part 2' (#139) from ↵Leah Rowe
andreamtp/lbmk:fix_distro_dependencies into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/139
2023-10-20lbmk: use 2-level directory structure in script/Leah Rowe
as opposed to the current 3-level structure. recent build system simplifications have enabled this change, thus: ./build fw coreboot -> ./build roms ./build fw grub -> ./build grub ./build fw serprog -> ./build serprog ./update project release -> ./update release ./update project trees -> ./update trees ./update vendor download -> ./vendor download ./update vendor inject -> ./vendor inject alper criticised that the commands were too long, so i made them shorter! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-19Added python-unversioned-command for Fedora38Andrea Perotti
Added python-unversioned-command as dependency to have /usr/bin/python to call python3 in Fedora.
2023-10-19Fix Debian/Ubuntu dependenciesAndrea Perotti
Dependencies for Debian/Ubuntu and derived distros are now deduplicated and sorted. Added target for Linux Mint as well.
2023-10-19Merge pull request 'Fix F38/Ubuntu 20.04 dependencies' (#137) from ↵Leah Rowe
andreamtp/lbmk:fix_distro_dependencies into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/137
2023-10-19Fixed Void Dependencies for building Serprogneutrocyte
2023-10-19Fix F38/Ubuntu 20.04 dependenciesAndrea Perotti
Dependencies for Fedora 38 and Ubuntu 20.04 are now deduplicated and sorted. Missing packages added and packages names updated where needed.
2023-10-15coreboot/fam15h: remove redundant patchLeah Rowe
i previously added this just for kicks, but it's not actually needed; gnat isn't used on fam15h boards so lbmk doesn't even use it (it's disabled). in fact, i tested lbmk with crossgcc_ada handling taken out, but with said patch; i still got build errors with gnat anyway, on that old coreboot revision (but gnat isn't needed there anymore). Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-14coreboot: gru: Use default coreboot treeAlper Nebi Yasak
We don't really need a custom coreboot tree for Chromebooks. I had added one, because at a cursory glance to the available config/coreboot/board subdirectories I had the impression that I should. But upstreams have one tree for every board and I think we should move towards that too. Move the one important BL31 makefile patch into the default coreboot patches, update the gru boards' configs by running savedefconfig in the cros tree and then running olddefconfig in the default tree. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Do not persist EFI variablesAlper Nebi Yasak
By default U-Boot stores EFI variables in a ubootefi.var file in whatever EFI System Partition it finds, which would be a FAT filesystem. I'm occasionally finding out while testing that my ESPs somehow end up with a corrupted filesystem, and I'm suspecting it's this. For now, disable storing EFI environment variables on disk so that U-Boot doesn't try to manipulate the filesystem. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Enable more EFI commandsAlper Nebi Yasak
Enable U-Boot commands to manipulate EFI environment storage, to self-test EFI implementation, and to run a basic EFI test application. These are so that we can test and debug EFI functionality easier. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Enable more bootstd featuresAlper Nebi Yasak
U-Boot upstream is switching to a new code framework for discovering and booting OSes ("Standard Boot", or "bootstd"). Enable more features for it, including commands we can use for introspection and debugging. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Do not reset on panicAlper Nebi Yasak
Normally U-Boot immediately resets the board on a panic. I had run into "Synchronous Abort"s from shim and rEFInd, and having a traceback in those cases can be useful. Hang instead of resetting, so the panic reason stays on the screen. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Enable poweroff commandAlper Nebi Yasak
We should be able to power the board off from U-Boot command line. Enable the "poweroff" command for gru boards so we can. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: gru: Disable VIDEO_COPYAlper Nebi Yasak
U-Boot can keep a "copy" framebuffer to read from, for devices where reading from hardware framebuffer is expensive. This needs the video driver to support it. The Rockchip video driver doesn't need or support it, so this option does nothing on gru boards. Disable it. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: Set EFI variable buffer size to upstream valueAlper Nebi Yasak
U-Boot upstream used to have 16KB for EFI variables, and this was causing problems with shim. Commit f0236acbc663 ("u-boot: Increase EFI variable buffer size") fixed this by raising it to 32KB in our builds. It has now been raised to 64K upstream, so raise it here as well. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: Avoid building U-Boot-only binman imagesAlper Nebi Yasak
For Rockchip boards U-Boot tries to build SPI and MMC images that require an externally built BL31 file to be provided, and the build fails otherwise. This is not really as configurable as it should be. In Libreboot, we only care about the build outputs for U-Boot proper. There is a BL31 built during our coreboot builds, but using that in U-Boot builds is a chicken-and-egg problem. Building BL31 outside the coreboot build and passing it to both projects is possible, but needs work. For now, stop trying to build these U-Boot-only images as a workaround, by removing the binman image descriptions from the device-tree sources. Additionally, disable in our configs the BINMAN_FDT functionality that allows using these at runtime as it requires them to be present. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: Add patch to avoid regulator errorsAlper Nebi Yasak
U-Boot upstream has added a reference counting for regulator enable actions which somehow makes gru-kevin unbootable. Add a workaround that makes it work again. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: Update to v2023.10Alper Nebi Yasak
Set default U-Boot revision to v2023.01 and rebase patches on top of that. Another series about 16x32 fonts was merged upstream, so drop some now-unnecessary patches we had for that. For the video damage tracking series, switch to the version I'm trying to upstream. Upstream kconfig status is a bit unstable, so updating configs with `make oldconfig` would miss important upstream changes, since they rely on carrying defaults via upstream defconfigs. Update the configs as such: - Turn old configs into defconfigs (./update project trees -s u-boot) - Save the diff from old upstream defconfig (diffconfig $theirs $ours) - Update U-Boot revision, rebase patches, and clean old trees - Prepare new U-Boot tree (./update project trees -f u-boot) - Review the diffconfigs to see if any options were renamed upstream - Copy over the new upstream defconfigs and apply earlier diff - Turn new defconfigs into configs (./update project trees -l u-boot) Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14u-boot: qemu_arm64_12mb: Remove misleading rev fieldAlper Nebi Yasak
The U-Boot build for qemu_arm64_12mb board refers to a code revision whereas it uses the common "default" tree, remove the bad reference. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-14build/fw/coreboot: Fix misuse of raw u-boot.bin as payloadAlper Nebi Yasak
The "u-boot.bin" file generated by U-Boot builds is a raw binary. When adding payloads to a CBFS, we need to use ELF files with add-payload or manually pass the entry point and load address of the payload binary with add-flat-binary. We primarily use the "u-boot.elf" which gets build with the REMAKE_ELF option, as it also has the necessary device-tree binary that U-Boot usually needs to work. When the option is not set (e.g. for QEMU), we need to use the "u-boot" file which is an ELF. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-10-12coreboot/default bump: rev d862695f5f, 12 Oct 2023Leah Rowe
Riku's mSATA patch for HP8300USDT was merged upstream, so the patch has been dropped from lbmk because it is contained within this new coreboot revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12use me_cleaner from coreboot instead of upstreamLeah Rowe
coreboot closely matches upstream, whose current release is version 1.2 from 2018, and coreboot has not changed it in any meaningful way. the upstream did add patches since, but they are documentation patches only. this means: we do not need to use the upstream version Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10config/dependencies: fix unifont on arch/parabolaLeah Rowe
it's unarchiver in repos. not unar. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/ubuntu: symlink to debianLeah Rowe
this is for the latest ubuntu release. the ubuntu2004 config (for ubuntu 20.04) still exists, and will remain in place. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies: add popos configLeah Rowe
symlinked to the debian config Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/debian: add autopointLeah Rowe
a user installed these dependencies in popos, but autopoint was missing during the grub build. add autopoint to the debian dependencies config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09disable 32-bit memtest86plus, only build 64-bitLeah Rowe
some users reported build errors. technically, there's nothing wrong with lbmk but it relies on hostcc, and hostcc is hit or miss when it comes to cross compiling 32-bit, depending on the build system of whatever project. lbmk needs to handle cross compilation. for now, i'm just disabling memtest86plus on non-64-bit hosts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump grub revisionLeah Rowe
most of the changes since last revision aren't very useful to us; most of them pertain to fs/ntfs, but there is one that is interesting: 48f569c78a496d3e11a4605b0999bc34fa5bc977 kern/acpi: Skip NULL entries in RSDT and XSDT Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump seabios revisionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07rename blob/ to vendor/Leah Rowe
in the future, we may start downloading files that aren't blobs, such as mxm port configs (on mainboards that use MXM graphics) this directory will contain all of those files generally change the language used, across lbmk, to make use of "vendorfile" instead of "blob" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07Rename blobs/ to blob/Leah Rowe
We don't have a directory names "srces", just "src". Ditto ecs, mrcs <-- it's just ec and mrc When referring to a file, e.g. blob/t1650/me.bin, that makes much more sense, because it's a single blob, not multiple blobs. Don't pluralise what isn't plural Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put all src downloads under src/Leah Rowe
build/release/src was partly re-written to accomodate this memtest86plus was patched to have a central Makefile, and lbmk modified to use that, rather than mess with build32 and build64. the central Makefile just builds both targets or cleans both targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02grub.cfg: disable the pagerLeah Rowe
The pager causes trouble in some cases, where the user has to press enter at boot time depending on the configuration. Interactive use is one thing, but we should leave this disabled for smoother experience. If the user *wishes* to use the shell, they can always just enable the pager themselves by doing: set pager=1 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-29update/blobs/*: simplify mrc.bin handlingLeah Rowe
mrc.bin is now handled by include/mrc.sh, adapted from now-deleted script/update/blobs/mrc much of the logic has been re-written or adapted for inside script/update/blobs/download mrc links/hashes now defined in config/blobs/sources the new code is simpler (and smaller). in addition, lbmk can now easily handle mrc.bin files for other platforms such as broadwell. watch this space. the full .zip download is now cached, like with other vendor downloads. this means it won't be re-downloaded if it was already downloaded before. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25split up grub patches into subdirectoriesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Update email address for Leah Rowe copyrightsLeah Rowe
also, some of them were out of date; years now updated. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/repos: concatenate multiple revision filesLeah Rowe
With this change, it's still possible to have a single file at config/git/revisions, but this has been scrapped. Instead, multiple files now exist under config/git/ with the same modules declared, but the files are separated logically. List of files under config/git: * bios_extract * biosutilities * coreboot * flashrom * grub (gnulib also defined here) * me_cleaner * memtest86plus * seabios * serprog (multiple projects defined) * u-boot * uefitool The rationale behind this change is simple: in the future, we will stop relying on build systems within imported projects for the import of git submodules. Instead, we will handle them directly in lbmk. Additionally, a Linux payload is planned for Libreboot, made easier by the recent audit (script handle/make/config makes it easy to integrate Linux, and handle cross-compilers for userland utilities); a "linux" file under config/git/ could also define rules for each project besides linux, such as musl libc, busybox and other utilities. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-24update grub revisionLeah Rowe
It's now 44 revisions above 2.12-rc1, not 17 above. The additional patches (in GRUB master) contain several important fixes, including cryptodisk and ZFS fixes plus a few other interesting changes, namely: 14c95e57fddb6c826bee7755232de62efc8eb45b: kern/misc: Make grub_vsnprintf() C99/POSIX conformant 296d3ec835ed6e3b90d740e497bb534f14fe4b79: disk/cryptodisk: Fix missing change when updating to use grub_uuidcasecmp() 42a831d7462ec3a114156d56ef8a03e1d47f19e7: ZFS: support inode type embed into its ID 96446ce14e2d1fe9f5b36ec4ac45a2efd92a40d1: ZFS: Fix invalid memcmp 444089eec6042250ce3a7184cb09bd8a2ab16808: ZFS: Don't iterate over null objsets 7ce5b4911005b2a0bfd716d92466b6711844068c: ZFS: Check bonustype in addition to dnode type There are more patches than this, but these are the ones that strike me as interesting for Libreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12Merge pull request 'make clean stm32-vserprog for release' (#130) from ↵Leah Rowe
Riku_V/lbmk:makeclean into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/130
2023-09-11make libopencm3 correctlyRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11Download libopencm3 before buildingRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>