summaryrefslogtreecommitdiff
path: root/config/vendor
AgeCommit message (Collapse)Author
2024-02-04NEW BOARD: Dell OptiPlex 9020 MT (and 7020 MT)Leah Rowe
Specifically the MT versions. The SFF versions will be added separately, in a later commit. See: https://review.coreboot.org/c/coreboot/+/55232 This patch has been added, from patchset 31. It still has some unresolved issues, on that patchset, but it should boot. See commit message there. Of note: I've enabled PCI REBAR, though it's unknown whether it will work (some comments there about it though, on that gerrit page). I've also set CBFS size to 8MB, not the full size of the BIOS region; this is required on the T440p which uses the same mrc.bin file, to get S3 working. TSEG stage cache disabled, as on other Haswell boards. The setup: SeaBIOS-only as first payload, but with GRUB enabled as secondary payload. The _grubonly setup has been enabled here. This way, the config will work on iGPU and dGPU setups without issue. Signed-off-by: Leah Rowe <info@minifree.org>
2024-01-12REMOVE MAINBOARD: lenovo x201Leah Rowe
with neutered ME, fan control fails. while there are ways to mitigate it, many users will not, and will likely see their system overheat, which is very dangerous. this bug (failed fan control on neutered ME) only affects arrandale machines such as lenovo x201. the newer machines are not affected by this. other arrandale machines will probably not be added to libreboot because of this, or they will be subject to further testing. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-10NEW MAINBOARD: HP EliteBook 820 G2Leah Rowe
This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24Add HP 8300 CMT portRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-23dell/e6400nvidia_4mb: new configuration (nvidia)Leah Rowe
the e6400_4mb target has libgfxinit and (if seabios) vgarom initialisation, but has issues on the nvidia model, even when using nomodeset. with this target, e6400nvidia_4mb, only the vgarom initialisation is used, libgfxinit is disabled. on nvidia models, this one should work a little bit better. specifically: nouveau crashes on this machine, with libreboot installed, but you can use nomodeset. however, when libgfxinit is also enabled, nomodeset no longer works properly. so this target disables all video initialisation in coreboot. only seabios will initialise anything video-related, by executing the vga option rom. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21document hp laptop rom familiesRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-19Add HP EliteBook 8460pRiku Viitanen
Inside the BIOS update, there's 68SCE and 68SCF variants. Based on Qubes HCL and browsing linux-hardware.org, these are Probook 6360b and Elitebook 8460p respectively. I checked the KBC1126 EC Firmwares within the update file, both use the exact same firmware images. Following-up will be a very similar but untested port for 6360b. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-17added x220edp_8mbrisapav
2023-11-05Add Dell Latitude E6530 supportNicholas Chin
This is pretty much the same as the E6430 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-10-29add lenovo x201 supportLeah Rowe
note: me6_update_parser needs to be written, similar to me7_update_parser, to generate the partition tables within intel me6 on lenovo bios updates. the current logic in lbmk goes like this: mkdir -p vendorfiles/cache/ and save your factory dump as: vendorfiles/cache/x201_factory.rom the build system has been modified, in such a way as to support extracting me.bin (which is the full one) and then neutering from this. this is done automatically, if the file is present, but you must first insert that file there, which means you'll need a dump of the original boot flash on your thinkpad x201 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07rename blob/ to vendor/Leah Rowe
in the future, we may start downloading files that aren't blobs, such as mxm port configs (on mainboards that use MXM graphics) this directory will contain all of those files generally change the language used, across lbmk, to make use of "vendorfile" instead of "blob" Signed-off-by: Leah Rowe <leah@libreboot.org>