summaryrefslogtreecommitdiff
path: root/config/git
AgeCommit message (Collapse)Author
2024-09-25config/git: Import pcsx-reduxLeah Rowe
We don't need the entire emulator, but we will be using a specific part: src/mips/openbios third_party/uC-sdk submodule is included, because it contains the necessary header files when building open bios. I will be adding Sony Playstation support to Libreboot, alongside a new emulator project to be announced soon. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-09-24Add Mate Kukri's deguard utilityLeah Rowe
This program disables the Intel Boot Guard on Dell OptiPlex 3050 Micro, via Intel ME modification. Using this hack, you can run unsigned code on the ME. Mate disabled BootGuard this way. This will be used to add Dell OptiPlex 3050 Micro support in Libreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-08-11flashprog: bump to 639d563 (2024-08-02)Leah Rowe
The workaround-mx patch was rebased on one section in spi.c, because that part in upstream added QPI support; in the newly rebase mx patch, the workaround_mx behaviour is only honoured if QPI (Quad SPI) is not in use. Quad SPI is not used in practise, on the machines where this workaround is intended (GM45 ThinkPads with Macronix chips). This imports the following upstream changes: * 639d563 README: Update flashprog.org URLs * cbbd601 README: Update dependency list and Linux package names * 79451f1 README: Rename "Packaging" -> "Source Packaging" * 5b4695c README: Dial laptop warning down a little * 7224085 udev rules: Add some more IDs * 448457a ch347_spi: Add CH347F ID and loop over the entries * e39549b ch347_spi: Search for compatible USB interface * dfd0647 ich_descriptors: Refactor component density handling * b2ad9fd ich_descriptors: Make use of SPI_ENGINE_PCH100 marker * 140e22f chipset_enable: Make use of SPI_ENGINE_PCH100 marker * 869f0e7 ichspi: Use `swseq_data' on ICH7 paths too * eeee91b ichspi: Replace all switch/case on `ich_generation' * ecba1d8 ichspi: Drop redundant bail-out cases in ich_set_bbar() * e8babf4 ichspi: Use a single check to enable hwseq for PCH100+ * fda324b ichspi: Introduce SPI_ENGINE_PCH100 marker * a1f6476 ichspi: Split ICH7 init out * 3f75d44 ich_descriptors: Remove `Dual Output Fast Read' for newer gens * 2862011 spi25: Try to set volatile quad-enable (QE) automatically * 4ac536b spi25_statusreg: Allow to write (non-)volatile bits specifically * b1d2bae dediprog: Fix and enable 4BA modes for SF600Plus-G2 * d0afeef dediprog: Disable 4BA modes for SF100 w/ protocol v2 * 1b1deda Implement QPI support * a1b7f35 dediprog: Implement multi-i/o reads * 008a44f dediprog: Split read/write command preparation by protocol * 4760b6e spi25: Implement multi-i/o reads * 0c9af0a spi25: Check quad-enable (QE) bit * 930d421 spi25: Introduce generic spi_prepare_io()/spi_finish_io() * 8d0f465 spi25: Extract 4BA preparations into new `spi25_prepare.c` * 044c9dc Add FT4222H support * fc7c13c linux_gpio2_spi: Implement multi i/o * 5fc3154 bitbang_spi: Implement multi-i/o * d16a911 bitbang_spi: Move API into its own header file * 226bb87 flashchips: Add missing QE-bit definitions * 4fa39c5 flashchips: Fill multi-i/o gaps in MX25U family * 5f50999 flashchips: Fill multi-i/o gaps in MX25R family * 46552c8 flashchips: Fill multi-i/o gaps in MX25L family * 96786d0 flashchips: Fill quad-i/o gaps in XM25Q family * a26a3c6 flashchips: Fill dual-i/o gaps in W25X family * 2133f59 flashchips: Fill quad-i/o gaps in W25Q family * 68573af flashchips: Split GD25Q127C and GD25Q128C * 4da971f flashchips: Fill quad-i/o gaps in GD25*Q families * f7e2d97 spi: Allow to define a quad-enable (QE) configuration bit * 1412d9f spi: Rework FEATURE_QPI * d518563 spi: Prepare for multi i/o and dummy bytes * bd72a47 spi25_statusreg: support reading/writing configuration register * 3d728e7 spi25_statusreg.c: support reading security register * a358b14 flashchips: Split W25Q64.W -> W25Q64DW | W25Q64FW/W25Q64JW...Q * 3127db1 manibuilder: Drop legacy flashrom tag collections * 619d9c0 manibuilder: Use `test_build.sh' * 6560bba manibuilder/almalinux: Install `diffutils' for new `test_build.sh' * c7b549e test_build.sh: Compare output for -L of Make and Meson builds * 72b30a0 test_build.sh: Don't try to run cross-compiled programs * 3d2f212 test_build.sh: Allow to override Make and Meson commands * 4eb9748 test_build.sh: Run tests for both Make and Meson builds * 8279457 manibuilder: Add Alpine Linux 3.18 & 3.19 images * 15e9b10 manibuilder/alpine: Install libjaylink-dev when available * b8b3593 manibuilder: Add images for Fedora 38..40 * 7b05f09 manibuilder: Add images for Ubuntu 24.04 "Noble Numbat" * 5e8b339 manibuilder/anita: Add NetBSD 10.0 i386 & amd64 images * 61da8c7 manibuilder/anita: Export library path for libusb * 39152af manibuilder: Set sourcearcade.org as default source * 20073e7 Properly clear erase-block selection when bigger block is chosen * 3824c8d ichspi: Allow all opcodes when the "opmenu" isn't locked * 0d4354e flashchips: Add W25Q32JV-.M Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22lib.sh: more unified config handlingLeah Rowe
replace it with logic that simply uses "." to load files directly. for this, "vcfg" is added as a variable in coreboot target.cfg files, referring to a directory in config/vendor/ containing a file named pkg.cfg, and this file then contains the same variables as the erstwhile config/vendor/sources config/git files are now directories, also containing pkg.cfg files each with the same variables as before, such as repository link and commit hash this change results in a noticeable reduction in code complexity within the build system. unified reading of config files: new function setcfg() added to lib.sh setcfg checks if a config exists. if a 2nd argument is passed, it is used as a return value for eval, otherwise a string calling err is passed. setcfg output is passed through eval, to set strings based on config; eval must be used, so that the variables are set within the same scope, otherwise they'd be set within setcfg which could lead to some whacky results. there's still a bit more more to do, but this single change results in a substantial reduction in code complexity. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07define mdfiles/images in config/submodules/docs/Leah Rowe
again: the "depend" variable must never be used for subprojects that point to a subdirectory of the main project, because there's no clean way of handling this in case of error conditions. make it a submodule under config/submodules/. this is for the documentation, including static site generator documentation, and image files (photos). as of this revision, there are now only those "depend" projects defined in config/git/, where the destination directory of the subject is not a subdirectory of the main project, so: in a subsequest revision, i will mitigate an existing bug whereby failure of the dependency project leaves the main one still intact, breaking builds; this revision enables that to be done. from now on, subproject-to-subdirectory-of-main-project will be avoided in config/git/; config/submodules/ will be used. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07libopencm3 to config/submodules/ on stm32-vserprogLeah Rowe
same as the previous patch, we must no longer use "define" variables in config/git/ when the path is a subdirectory of a given project, because it means that the download can only happen after the main one, and currently if that fails, the download of the main repo would remain intact, breaking future builds in ways that we can't control - to be clear, it could be controlled, but with added code complexity in the build system, so: put it in config/submodules/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07add tinyusb to config/submodule/ for pico-sdkLeah Rowe
don't define it as a "depend" variable in config/git/, because it means putting the files in a subdirectory of an existing project was was already then downloaded, and that means it can't be downloaded first; if the download of it fails, the old download is left intact. this bug isn't currently fixed in the build system, at all, so this and other patches are being made to mitigate it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07config/git: use "depend" for serprog dependenciesLeah Rowe
this brings the handling of serprog projects in sync with canoeboot, which relies on the "depend" variable to get the needed submodules, because cbmk does not download submodules for these projects lbmk does download submodules. i want it in sync with cbmk for this, to make merging easier between both projects, because i'm going to make a change on both projects, whereby config/submodules/ is used exclusively Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision againLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision in git configLeah Rowe
it imports the same environmental variable fix because i had the same buggy TMPDIR check there. i fixed that upstream in untitled. import the new untitled revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26flashprog: bump to 5b4fdd1 from 2 May 2024Leah Rowe
I've rebased the workaround-mx patch as follows. See: commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4 Author: Nico Huber <nico.h@gmx.de> Date: Fri Jan 13 01:19:07 2023 +0100 Let the flash context directly point to the used master This change, now upstream in flashprog, made me have to do this in the patch. I changed this: flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf); to this: flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf); It should work fine. This update imports the following upstream patches from flashprog: * 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347 * 72c9e40 meson: Check for CPU families with known raw mem access * 3458220 platform/meson: Port pciutils/pci.h workaround to Meson * f279762 platform/meson: Check for libi386 on NetBSD * 14da5f7 README: Convert to Markdown * 8ddea57 README: Document branching and release policy * 2522456 util/list_yet_unsupported_chips.sh: Fix path * cbf9c11 spi: Don't cross 16MiB boundaries with long writes * 823a704 dediprog: Skip warning on first attempt to read device string * e8463c8 dediprog: Revise prefix check for given programmer id * 38af1a1 dediprog: Revise id matching * 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting * cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting * 7679b5c spi25: Replace spi_read_chunked() with more abstract version * ca1c7fd spi25: Normalize parameters of spi_nbyte_read() * e36e3dc dediprog: Use default_spi_write_256 * 522a86d linux_spi: Use default_spi_read()/_write_256() * 806509b cli_classic: Turn progress reporting into a progress bar * 842d678 libflashrom: Return progress state to the library user * aa714dd flashprog.c: Let select_erase_functions() return byte count * 2eed4cf serprog: Add SPI Mode and CS Mode commands * 821a085 dediprog: Implement id reading for SF600 and later * 274e655 dediprog: Read device string early * 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2 * fb176d2 dediprog: Use more general 4BA write mode for newer protocols * 0ab5c3d dediprog: Split device type and version parsing * bdef5c2 dediprog: Use unsigned conversions to parse device string * 5262e29 dediprog: Try to request 32B device string (instead of 16B) * e76e21f dediprog: Get rid of some unnecessary hex constants * 5a09d1e udelay: Lower the sleep vs delay threshold * 03ad4a4 linux_mtd: Provide no-op delay implementation * 211c6ec serprog: Refine flushing before synchronization * 383b7fe serprog: Test synchronicity before trying to synchronize * d7318ea serprog: Move synchronicity test into separate function * 9a11cbf Let the flash context directly point to the used master * aabb3e0 writeprotect: Hook wp functions into the chip driver * 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode` * 929d2e1 internal: Pass programmer context down into chipset enables * 7c717c3 internal: Pass programmer context down into board enables * e3a2688 Pass programmer context to programmer->init() * 2b66ad9 Start implementing struct flashprog_programmer * 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME * b197402 memory_bus: Split register mapping into own function * 0e76d99 memory_bus: Move (un)map_flash_region into par master * 9eec407 Perform default mapping only for respective chips * 56b53dd wbsio_spi: Request memory mapping locally * 5596190 it87spi: Request memory mapping locally * 46449b4 spi25: Drop stale `bus == SPI` guards * ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook * 901fb95 Add prepare/finish_access() hooks for chip drivers * a96aaa3 dediprog: Support long writes of 16MiB and more * 1338936 Consider 4BA support when filtering erase functions * 8d36db6 flashprog.8: Fix up serprog example * d2ac303 flashprog.8: document new serprog cs parameter * d1b9153 chipset_enable.c: Add Genoa to mendocino entry Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04config/git: importer newer documentationLeah Rowe
I'm on a schedule here and don't have time to do the release changelog before actually compiling the release. I'm pushing the release changelog / news announcement *while the release is building*. Therefore, the actual release archive will contain Libreboot documentation, but from the lbwww revision just before the release announcement. (a changelog file is still generated from Git, and included in releases) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26GRUB: bump to today's latest revisionLeah Rowe
GRUB has not pushed many patches to master since the recent 2.12 release, but there are a number of interesting fixes. libreboot is doing a release soon. bump to latest grub revision. Some of the new patches in GRUB are interesting: XFS fixes: "fs/xfs: Handle non-continuous data blocks in directory extents" 68dd65cfdaad08b1f8ec01b84949b0bf88bc0d8c Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370 Apparently, XFS could not boot in some reports, though this was likely with BIOS or UEFI GRUB; no such reports were made to libreboot "gfxmenu/view: Resolve false grub_errno disrupting boot process" 39c927df66c7ca62d97905d1385054ac9ce67209 "util/grub-fstest: Add a new command zfs-bootfs" 28c4405208cfb6e2cea737f6cbaf17e631bac6cd The gnulib revision does not need to be updated at this time. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-11update pico-serprog to new revisionLeah Rowe
this merges the fix from: https://codeberg.org/libreboot/pico-serprog/pulls/1 however, PRs are not to be sent there. riku merged it in his repository, and i pulled it in the mirror hosted on libreboot codeberg Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-07update revision: pico-serprogRiku Viitanen
should fix https://codeberg.org/libreboot/lbmk/issues/182 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2024-01-28update pico-serprog to Riku's new revisionLeah Rowe
Riku introduced three new patches: * Add support for multiple chip selects. This allows you to control multiple chips from the same clip, on systems with dual flash setups, at least theoretically. * Enable pull-up on unused chip selects - pull them high so that chips you connect that to are deactivated while flashing the target chip. This could be used on thinkpad W541 for instance, where miso/mosi have 0ohm between them via the two flash ICs. You could pull the other chip select high. * Documentation for the above, in the pico-serprog readme. This goes in tandem with a patch from Riku, present in the recently integrated flashprog project, namely: commit ddb6d926783d4f9cbee04c7392718ed8f89daa0e Author: Riku Viitanen <riku.viitanen@protonmail.com> Date: Mon Jan 15 19:15:49 2024 +0200 serprog: Add support for multiple SPI chip selects This functionality will therefore be present in the next release of Libreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27config/git: use flashprog instead of flashromLeah Rowe
Nico Huber is the rightful project lead. I do not support the coup that occured within the flashrom project. Nico has always been of great service to the Libreboot project, by virtue of his work on both coreboot and flashrom. Nico Huber was unfairly removed from the flashrom project infrastructure, due to unfounded accusations hurled at him by flashrom's new project lead. The accusations are unfounded because no evidence was given. Use Nico Huber's fork, named flashprog. We will work with flashprog from now on. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25update config/git/docs to latest revsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-31Bump GRUB to 2.12 releaseLeah Rowe
Actually, it's 2 commits after 2.12, because there was a patch added afterwards, fixing a build issue on Gentoo. These changes are present in GRUB 2.12, relative to the revision that we previously used on lbmk: * b835601c7 build: Include grub-core/extra_deps.lst in dist * 8961305b4 Bump version to 2.13 * 5ca9db22e Release 2.12 * 477a0dbd5 efi: Add support for reproducible builds * dcc1af5d6 efi: Generate stack protector canary at build time if urandom is available * e424e945c efi: Initialize canary to non-zero value * 7c8ae7dcb gfxmenu/gui_image: Fix double free of bitmap * 63fc253fc commands/acpi: Fix calculation of ACPI tables addresses when processing RSDT and XSDT * f20123072 libnvpair: Support prefixed nvlist symbol names as found on NetBSD * a13df3d15 bootstrap: Don't check gettext version * 6d2aa7ee0 kern/mm: Use %x and cast for displaying sizeof() * b3d49a697 configure: Add RPATH for freetype on NetBSD * 52dbf66ea configure: Add *BSD font paths * 2d6a89980 autogen: Accept python3.10 as a python alternative * 3d4cb5a43 build: Rename HAVE_LIBZFS to USE_LIBZFS * e4dbe5cfa gnulib: Tolerate always_inline attribute being ignored * 31e47cfe2 util/editenv: Don't use %m formatter * f5905f656 osdep/bsd/hostdisk: Fix NetBSD compilation * cb1824a87 osdep/generic/blocklist: Fix compilation * 2f3faf02c disk/diskfilter: Remove unused variable * 3815acc57 build: Tolerate unused-but-set in generated lexer/bison files * c129e44e7 loader/i386/bsdXX: Fix loading after unaligned module * 89fbe0cac grub-core/Makefile.am: Make path to extra_deps.lst relative to $(top_srcdir)/grub-core * 353beb80c util/grub-install: Move platdir path canonicalization after files were copied to grubdir * f18a899ab util/grub-mkstandalone: Ensure deterministic tar file creation by sorting contents * ed74bc376 util/grub-mkstandalone: Ensure stable timestamps for generated images * 069cc46c9 net/http: Fix gcc-13 errors relating to type signedness * e7a831963 templates: Reinstate unused version comparison functions with warning * 3f9eace2d util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated * e60015f57 efi: Set shim_lock_enabled even if validation is disabled * e35683317 docs: Improve bli module documentation * 57059ccb6 bli: Add explicit dependency on the part_gpt module * 154dcb1ae build: Allow explicit module dependencies * 17c68472d kern/ieee1275/init/ppc64: Display upper_mem_limit when debugging * 5f8e091b6 kern/ieee1275/init/ppc64: Fix a comment * dc569b077 kern/ieee1275/ieee1275: Display successful memory claims when debugging * 0ac3d938a loader/powerpc/ieee1275: Use new allocation function for kernel and initrd * 2a9a8518e kern/ieee1275/cmain/ppc64: Introduce flags to identify KVM and PowerVM * 679691a13 kern/ieee1275/init/ppc64: Rename regions_claim() to grub_regions_claim() * d49e86db2 kern/ieee1275/init/ppc64: Add support for alignment requirements * fe5d5e857 kern/ieee1275/init/ppc64: Return allocated address using context * ea2c93484 kern/ieee1275/init/ppc64: Decide by request whether to initialize region * 0bb59fa9a kern/ieee1275/init/ppc64: Introduce a request for regions_claim() * aa7c13226 fs/xfs: Add large extent counters incompat feature support Most notable in the above log, that are beneficial to Libreboot users, are: aa7c13226 which improves XFS support (large extents), which is default now on many setups. ed74bc376 which introduces more stable timestamp generation when using grub-mkstandalone. this is what lbmk uses to generate grub.elf, whereas grub previously only implemented this fix on mkimage which we don't use f18a899ab which ensures deterministic (reproducible) tar file creation by sorting contents (file names / directories). this is done by sorting the entries f5905f656 which improves grub build system reliability on netbsd and openbsd systems - useful for us because an ambition of lbmk is to port the build system to run on bsd systems, and we will still want grub - several other of the changes here are beneficial for BSD aswell, all or most of them by Vladimir Serbinenko Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revision againLeah Rowe
riku committed a new patch, that fixes build errors when PICO_DEFAULT_LED_PIN is not defined, on a given board. in such cases, riku's new patch just disables handling of the status LED, but LEDs continue to work on boards where it is defined. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23git/pico-serprog: update revisionLeah Rowe
the new revision sets drive level to 12mA instead of the default 4mA. 16-20mA is the maximum tolerated level for data lines, on most flash ICs, so 12mA is relatively safe. riku did this a while ago, tested on pico pi. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-22revert flashrom back to version 1.2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-09Bump GRUB revision to 8 November 2023 revisionLeah Rowe
Now the revision is: 64e3cee72ab8f5876abfebb263b5e6cf7c4a9a4e The old revision was: e58b870ff926415e23fc386af41ff81b2f588763 With this new revision update, the following patches have been imported from the upstream GRUB project: * 64e3cee72 gpt: Add compile time asserts for guid and gpt_partentry sizes * 7de6fe963 types: Split aligned and packed guids * 5fc985bfd gpt_partition: Mark grub_gpt_partentry as having natural alignment * 7ad30299d efi: Deduplicate configuration table search function * c6cf807fc lsefi: Add missing static qualifier * a964e359b types: Fix typo * 3f79e3b15 util/grub-mount: Check file path sanity * 85e40b36e configure: Make the DJVU_FONT_SOURCE configurable with --with-dejavufont=FILE * 2d6631d2a configure: Make the Unifont FONT_SOURCE configurable with --with-unifont=FILE * 07318ee7e fs/xfs: Fix XFS directory extent parsing * ad7fb8e2e fs/xfs: Incorrect short form directory data boundary check * 4e10213de Revert "zfsinfo: Correct a check for error allocating memory" * 4266fd2bb disk/i386/pc/biosdisk: Read up to 63 sectors in LBA mode * cab04dcda kern/i386/pc/init: Flush cache only on VIA C3 and earlier * 3c7e84257 fs/btrfs: Zero file data not backed by extents * 4bcf6f747 kern/ieee1275/init: Restrict high memory in presence of fadump on ppc64 * cf58eca2a tests/util/grub-shell: Enable RNG device to better test stack smashing * c3bdf263f kern/efi/init: Disable stack smashing protection on grub_efi_init() * 95963d97f disk/cryptodisk: Add support for LUKS2 in (proc)/luks_script * 016f14257 disk/cryptodisk: Optimize luks_script_get() * f7a663c00 term/serial: Ensure proper NULL termination after grub_strncpy() * a19e47ca4 commands/efi/lsefisystab: Print the UEFI specification revision in human readable form Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05include untitledssg docs in releasesLeah Rowe
now the docs are complete, in releases. they contain the libreboot site, libreboot images, the untitled static site generator and untitled static site generator documentation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05put images in the proper place, in releasesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05roll back untitled revisionLeah Rowe
i haven't updated site.cfg yet Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-05config/git: merge img files with docsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-03merge untitled with docs, in releasesLeah Rowe
with this, you can just do: cd src/docs ./build the html files would then be available for publishing, if you wish, or you could set up a local httpd to view them. if you have pandoc installed, this will build the markdown files into html untitled static site generator is what generates the html files, from the markdown files, on the website. it will now also be included in releases. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-03include untitled ssg in releasesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-01Libreboot 2023110120231101Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-21Libreboot 2023102120231021Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-21config/git/www and www-img: import libreboot.orgLeah Rowe
it's not used by anywhere else in lbmk, but the release build script will automatically download each project named as per file names in config/git/ this is a stupidly simply way to prove documentation in libreboot releases, and i've used current revisions corresponding to the Libreboot 20231021 release, for this 20231021 release of lbmk. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20don't use notabug for backup git reposLeah Rowe
notabug is unreliable, even as a backup. why, just today, it was offline! all day. i originally moved libreboot away from notabug, to codeberg instead, but kept the notabug account online, and i still push to it when it's online. however, notabug seems to be in a terminal state of neglect by its admins, so lbmk should not use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update flashrom revisionLeah Rowe
flashrom-stable isn't really going anywhere i'll decide at some future point what to do with flashrom. for now, just give latest rev Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20add backup git repo for flashromLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20Revert "config/git: don't download flashrom"Leah Rowe
This reverts commit bf4ea8102ad71bf07e0014c71579b7f3576c1dec.
2023-10-20config/git: add more backup reposLeah Rowe
the grub backup was the same gnu server i decided to host grub on codeberg, as backup (gnu links as primary is ok) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20git/config: don't use github on main reposLeah Rowe
it's ok for now to use it as a backup. where only github was specified, i mirrored each given repository to codeberg as main repo for lbmk. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: don't download flashromLeah Rowe
it's not actually needed in lbmk flashrom can be downloaded separately by the user, if they want to flash their chip Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20git/config stm32-vserprog: don't fetch libopencm3Leah Rowe
it's downloaded by .gitmodules in stm32-vserprog Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: remove rpi-pico-tinyusb dependencyLeah Rowe
it's now downloaded automatically as a submodule, when downloading pico-sdk (which defines this module) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: give pico-sdk its own fileLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/trees: don't run make if mode=fetchLeah Rowe
this fixes a regression caused by a previous revision Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20consistent naming for src/pico-serprogLeah Rowe
don't ever name it rpi-pico-serprog Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20config/git: name files per download nameLeah Rowe
don't put multiple downloads in the same files, except when they are dependencies that go inside the directory of another download. by doing this, the following functionality will become possible: clean every project or build every project, or maybe fetch every project, based entirely on the names of these files. this will be used later to simplify the release script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12use me_cleaner from coreboot instead of upstreamLeah Rowe
coreboot closely matches upstream, whose current release is version 1.2 from 2018, and coreboot has not changed it in any meaningful way. the upstream did add patches since, but they are documentation patches only. this means: we do not need to use the upstream version Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump grub revisionLeah Rowe
most of the changes since last revision aren't very useful to us; most of them pertain to fs/ntfs, but there is one that is interesting: 48f569c78a496d3e11a4605b0999bc34fa5bc977 kern/acpi: Skip NULL entries in RSDT and XSDT Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put all src downloads under src/Leah Rowe
build/release/src was partly re-written to accomodate this memtest86plus was patched to have a central Makefile, and lbmk modified to use that, rather than mess with build32 and build64. the central Makefile just builds both targets or cleans both targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/repos: concatenate multiple revision filesLeah Rowe
With this change, it's still possible to have a single file at config/git/revisions, but this has been scrapped. Instead, multiple files now exist under config/git/ with the same modules declared, but the files are separated logically. List of files under config/git: * bios_extract * biosutilities * coreboot * flashrom * grub (gnulib also defined here) * me_cleaner * memtest86plus * seabios * serprog (multiple projects defined) * u-boot * uefitool The rationale behind this change is simple: in the future, we will stop relying on build systems within imported projects for the import of git submodules. Instead, we will handle them directly in lbmk. Additionally, a Linux payload is planned for Libreboot, made easier by the recent audit (script handle/make/config makes it easy to integrate Linux, and handle cross-compilers for userland utilities); a "linux" file under config/git/ could also define rules for each project besides linux, such as musl libc, busybox and other utilities. Signed-off-by: Leah Rowe <leah@libreboot.org>