| Age | Commit message (Collapse) | Author |
|---|
|
Many users report bugs, so I'm reverting lbmk back to only
supporting the rp2040 dongles for the time being. The
documentation will be updated to reflect this.
Pico2 support will be re-added at a later date, once more
testing has been done, and fixes made if necessary.
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This brings in the following upstream changes:
* e060018 flashchips: Explicitly zero-initialize in .qpi_read_params
* ff9526b dediprog: Use dual-i/o default only for SF600Plus-G2
* 5a72cfb flashchips: Fix block-protection bits for 4BA Puya chips
* 284d55b flashchips: Add WPS bit description for GD25Q128C
* 37e07a8 flashchips: Add missing QE bit descriptions
* 3646b18 flashchips: Add GigaDevice GD25LF128E 166MHz, 1.8V part
* d4eb532 flashchips: Add GigaDevice GD25LF80E..GD25LF64E 166MHz, 1.8V parts
* 38d037f flashchips: Add GigaDevice GD25LB512MF..GD55LB02GF 1.8V parts
* 1da0293 flashchips: Add GigaDevice GD25LB512ME..GD55LB02GE 1.8V parts
* 6d728e6 flashchips: Add GigaDevice GD25B512MF..GD55B02GF 3.3V parts
* 493a4e0 flashchips: Update and split GD25Q256D entry
* 648dfdc spi25: Fix cosmetic debug-print error due to unitialized buffer
* cfd607d layout: Show a warning if no region is included
* ec287e2 ich_descriptors_tool: Change region name EC/BMC -> EC_BMC
* 39a4f7d sb600spi: Request more `lspci` details
* 404529d memory_bus.c: Add missing copyright notice
* fbea0fe udev rules: Restore mode/group configuration
* c90d6c4 flashchips: Add some 25LC series EEPROMs
* ee8cf1c Provide no-op probe function, always returning 1
* 4e6155a spi25: Add SPI25_EEPROM enum and handle < 3-byte addresses
* 9512c9c Add missing copyright notices to recently created files
* 06fbccc flashchips: Add GigaDevice GD25LB256E 1.8V part
* bc001da flashchips: Add some GigaDevice GD25L*256 1.8V parts
* 7d0f556 flashchips: Update GigaDevice 1.8V family up to GD25LQ128
* 7f8c12d flashchips: Add GigaDevice GD25LQ20, update family up to GD25LQ16
* 565471c flashchips: Add GigaDevice GD25B512ME..GD55B02GE 3.3V parts
* 6ee2f89 flashchips: Update GigaDevice GD25Q/B/R 128Mbit, 3.3V parts
* c230c69 flashchips: Add remaining Puya PY25Q..H 3.3V parts
* 06e0264 flashchips: Add Puya PY25Q..H family up to PY25Q128H
* fe21b43 flashchips: Add remaining P25Q..H family 3.3V chips
* 1c5d829 flashchips: Add Puya P25Q40SH, P25Q80SH, P25Q16SH 3.3V parts
* b0cae5e flashchips: Add Puya P25Q06H, P25Q11H, P25Q21H 3.3V parts
* b09136b flashchips: Add Puya P25Q05..16H 3.3V parts
* ed8b82c flashchips: Add Fudan FM25Q128 3.3V part
* 4a35134 flashchips: Add Fudan FM25Q08A 3.3V part
* 7f7bffa flashchips: Add Fudan FM25Q64, update FM25Q08..Q32
* c591518 flashchips: Add Fudan FM25Q02/Q04 3.3V parts
* fea6e16 flashchips: Add Winbond W25Q16JV_M (DTR version)
* 56d727e flashchips: Add newer gen. XTX Tech. XT25F..F 3.3V parts
* c64a803 flashchips: Add XTX Tech. XT25F..B 3.3V family
* 46e4209 flashchips: Add XTX Tech. XT25F02E/04D/08B 3.3V parts
* 6bc88e7 flashchips: Add Boya/BoHong BY25Q32/64/128 3.3V variants
* 3cddff4 flashchips: Complete Boya/BoHong BY25D family
* 34e3de6 flashchips: Add Zetta Device ZD25LQ64/128 1.8V parts
* f050370 selfcheck: Check dummy-cycle settings when QPI is advertised
* d40037a selfcheck: Check for WP functions when BP bits are given
* 2a1036b flashchips: Fix up GD25Q128C write-protect support
* d4e41d3 flashchips: Add SST26VF080A
* 04c1cf7 Add .envrc
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This fixes a problem, in that CMake 4.0 dropped compatibility
with CMake version 3.5; UEFIExtract/CMakeLists.txt had the line:
CMAKE_MINIMUM_REQUIRED(VERSION 3.1.0 FATAL_ERROR)
This is lower than 3.5.
The new version has this:
CMAKE_MINIMUM_REQUIRED(VERSION 3.22)
Which is higher than 3.5, in terms of version number.
This brings in the following upstream changes:
* a072527 Convert other uses of 0xABCD back to ABCDh
* a19aead Revert "Update hexadecimal numbers output format from ABCDh to 0xABCD" due to breaking downstream tools
* 7752279 Improve region access settings info for Intel v2 descriptor
* 6f6debb Add volume header info on NumBlocks and Length used to calcualte alternative size of it
* f64ba09 Minor fix for embedded QHexView on Windows
* 2b23bbd Implement Apple developer signing for macOS builds
* 9cc9518 Update hexadecimal numbers output format from ABCDh to 0xABCD
* 73d07cd Add Kaitai-based parser for Dell DVAR store
* c8b7151 Fix minor bug while presenting the EOF elemement of AppleSysF store
* 892111a Add new fields into Intel Microcode header
* 7cea8ee Remove outdated definition of FLASH_PARAMETERS
* c38ed92 Add missing header comments to goto*dialog.h
* 22bb757 Remove PATH_MAX from realpath
* d61d759 Make sure to wrap all uses of kaitai::kstream into try-catch blocks
* 7ef3719 Add initial support for Insyde H2O FlashDeviceMap rev4
* 97a85f9 Add Microsoft LZMA section GUID
* a077743 Bump version numbers
* 07742a5 Update GUID database
* a12be6b Address review comments
* 9719b0c Update copyright and authors in About UEFITool window
* fbf6afd Expand Type column of the report to fit new FlashDeviceMap store and entry types
* 3cb5dc0 Add SLIC pubkey and marker parsers
* fd0faea Add Phoenix CMDB parser
* 01e2e08 Add FFS volume parser for non-AMI NVRAM areas
* 4e2a8f6 Add Intel uCode parser
* 58366f4 Add Insyde Flash Device Map parser
* b98edf6 Add Phoenix EVSA parser
* f989fdf Add Phoenix FlashMap parser
* 4e600eb Add Apple SysF/Diag parser
* 2d6eaa9 Add EDK2 FTW parser
* ca7d4ca Add Insyde FDC parser
* 34904bd Add KaitaiStruct parsing of Phoenix VSS2
* 489b85f Rewrite VSS and VSS2 NVRAM variable parsers in KaitaiStruct
* 2661b8f Remove manual NVRAM parsing, add EDK2 VSS parser written in KaitaiStruct
* d91115f Also sign UEFIFind and UEFIExtract for macOS
* 0fae05c Add adhoc signature to UEFITool on macOS
* 5e6a1c7 Fix CFBundleIdentifier in UEFITool Info.plist
* 8d7e01c Make sure to initialize counterUncData
* b1ad055 Bump version numbers
* 7dd9014 Update GUID database
* 4e3fa58 Update QHexView, build it as a library for Qt6 builds
* 369f101 Enable building ffsparser_fuzzer during CI/CD, improve readUnaligned to silence Clang UBSAN
* ff42cec UEFIExtract: add support for extracting uncompressedData for tree items that have it
* c94f78a Add missing common/LZMA/SDK/C/7zWindows.h
* b5756f9 Revert old patch from common/LZMA/SDK/C/CpuArch.c
* 65fb4a8 Update LZMA SDK to 24.09
* e66bc7d Apply a small patch to common/zlib/gzguts.h to fix a build issue in macOS
* dcf21fa Update built-in zlib to 1.3.1
* 0af36bd Fix an issue with kaitai_regenerate.sh creating backup files on modern macOS
* fd76e89 Update README.md
* 427d8ec Update README.md
* a824260 Add MX77L12850F
* a777f1f Update main.yml
* 5f23377 Update main.yml
* 932120c Use x64 macos-13 runner for FreeBSD in main.yml
* a8c008c Update macos-12 to macos-latest in main.yml
* 6b853f8 Fix SonarCube Scan action version
* 66565a5 Try using new SonarCube scan action
* 371448d Enable long file paths for UEFIFind
* b0cd7fe Update upload-artifacts action to v4
* 4b868bb Remove CodeQL and PVS-Studio from main.yml
* 214b356 Add AMIC A25LQ64 to internal JEDEC ID database
* 0030ea9 Fix findPattern logic when pattern is at the end of the data
* 3441255 fix: add qt version limit to setDesktopFileName
* 941ee6c Set desktop file name to fix the missing icon when running under Wayland
* c550853 Defined ACCESSPERMS for musl
* bf93a5e Bump version numbers
* d03a8f2 Fixing FreeBSD action
* 0a88da1 Update guids.csv
* 6f9a4c0 Fix off-by-one error in parsing IFWI partition table
* e0b1e02 Update main.yml
* 161c697 Update main.yml
* 573452e Update main.yml
* 166c797 add Micron XM25RH128C
* 0e11189 fix a few misspellings
* daf5851 Update README.md
* 1cba371 Update guids.csv
* 4992474 Fix CPD Extension offset (reverts 29915ca)
* 29915ca Fix CPD Manifest's partition offset
The ACCESSPERMS patch has been removed, because upstream
already dealt with this. Libreboot had made the same fix
independently, without realising that upstream also did.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Most importantly this should fix issues with rp2350 boards
not synchronizing properly.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
We were previously not handling picotool at all, and
pico-sdk would download picotool itself, at build time.
This means that the source archive, if created, would
not contain picotool. While not strictly required, for
complete corresponding source, since it's a toolchain
and not the actual pico-serprog firmware, it is my policy
that releases must include full corresponding source code,
when it is feasible to do so.
I must say, I intensely dislike cmake, with such burning
passion; I am thoroughly displeased by how hacky this is,
but it works and now nothing is in my way for a Libreboot
20241206 rev8 release!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This brings in several important bug fixes from upstream.
With this, the following upstream changes have been imported:
* eb2c041 cli_wp: Fix bail-out when multiple chips are detected
* e05e334 cli_common: Rename local `optarg' variable
* efad610 manibuilder: Include NetBSD (anita tags) in `native' target
* 09289fb manibuilder: Replace unmaintained DEFAULT_TAGS list
* 1457cc6 manibuilder: Stop build testing oldest, EOL targets
* 1faffa5 manibuilder: Fix Ubuntu Noble Numbat (24.04) for amd64
* 61dbe36 udev rules: Use `uaccess' tag instead of `plugdev' group
* 63d30a2 install: Install binary into bin/, not sbin/
* 6ce26a7 flashchips: add Winbond W25R512NW / W74M51NW
* 612519b ichspi: Add Intel Arrow Lake support
* d5a61ef ichspi: Add Intel Lunar Lake support
* 5e0d9b0 ichspi: Add Intel Meteor Lake SoC
* 0ef2eb8 ichspi: Add Intel Snow Ridge SoC
* 42daab1 ichspi: Properly add Emmitsburg PCH
* af26008 ich_descriptors_tool: Add missing options for EHL & C620
* 82fe123 ich_descriptors: Hard code number of masters for newer gens
* 157b818 ich_descriptors: Guard MCH strap handling by chipset version
* db878fb ich_descriptors: Drop chipset detection based on `freq_read`
* b3cc2c6 ich_descriptors: Unify pretty printing of PCH100+ masters
* 8e4151d chipset_enable: Remove hidden-spidev workaround for Elkhart Lake
* 6d72efa chipset_enable: Remove hidden-spidev workaround for all 14nm PCHs
* 092a699 chipset_enable: Remove hidden-spidev workaround for TGP+
* 5bbd324 chipset_enable: Add missing PCI ID for Intel PCH H410
* a088475 chipset_enable: Factor PCH100 hidden-spidev workaround out
* 5eb7a58 Drop 1s delay before automatic verification
* 7427569 libflashprog: Run programmer_shutdown() on failed setup
* 5a9d6ea chipset_enable: Fix memory leaks introduced with AMD SPI100
* e149fbe Only try to check erase opcodes for SPI25 chips
* 07ebc68 Avoid NULL deref in check_block_eraser()
* 2405310 chipset_enable: Mark Intel QM87 as DEP
* 9897063 flashchips: Allow volatile register writes for W25Q128.V
* c972aed flashchips: Configure WP for MX25L25635F/45G
* 8f7122c cli: Add new write-protect CLI
* eed122d layout: Implement flashprog_layout_get_region_range()
* 1f693db cli: Add new `config' CLI for status/config registers
* 85c2cf8 cli: Implement "command" option parser
* 24c0977 cli: Add print function for generic CLI options
* b82aadc cli: Move some declarations into `cli.h`
* a705043 cli: Add a new CLI wrapper
* d39c7d6 cli: Extract basic CLI init into cli_common
* df6ce9f cli: Extract log argument parsing into cli_common
* 0da839b cli: Extract layout argument processing
* d91822a cli: Extract layout argument parsing into cli_common
* e7899a9 cli: Move all long-option keys into cli.h
* 34e783a cli: Extract flash argument parsing into cli_common
* e68b08b cli_classic: Rewrite programmer argument parsing
* 6898f5b spi25_statusreg: Prefer volatile status register writes
* 55e7884 Introduce FLASHPROG_FLAG_NON_VOLATILE_WRSR
* fbba454 Install udev rules
* 768cfc4 flashchips: Add GigaDevice GD25LR512ME
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this brings support for a new microcontroller platform rp2530.
total number of pico boards supported now: 97
TEST: built them all
Tested-by: Riku Viitanen <riku.viitanen@protonmail.com>
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I'm adding ThinkPad T480 support next, which requires
the new revision of deguard. Mate Kukri changed the way
deguard is used, in a rewrite of the project, so lbmk
has to change too.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i mirrored riku's utils int, mxmdump and gpio-scripts
to the codeberg and disroot libreboot sites.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Due to quirks in how caching works in lbmk, this may be
error-prone. I'll properly address it in the next audit.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Riku used this for debugging, when adding the MXM support
to the HP EliteBook 8560w port. It will be useful for other
work that I have planned, so I'm archiving this too!
Riku has a lot of useful code, that I meant to import ages ago.
Once I'm done importing these in lbmk, I'll add backup repos.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Based on hell's code, but parses inteltool logs.
This will be useful for ports that I have planned, so
I'd like this to be included with Libreboot releases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Used to dump MXM config for a given mainboard. We used this
for the HP EliteBook 8560w.
I meant to import this via config/git/ ages ago.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This brings in the following important fix:
commit d128a0ae87086b37c0e5d7a8d934bcdee173402f
Author: Nicholas Chin <nic.c3.14@gmail.com>
Date: Fri Sep 27 22:57:22 2024 -0600
flashchips: Remove unsupported erase blocks for Winbond W25X{16,32,64}
This family of chips does not support the 0x52 (32 KiB block erase) and
0x60 (chip erase) opcodes according to their datasheet.
The full list of changes this brings in is as follows:
* d128a0a flashchips: Remove unsupported erase blocks for Winbond W25X{16,32,64}
* c6a924a Don't mention writing when erasing only (-E)
* dac4239 ch347_spi: Add 'spimode' parameter
* 56d236b chipset_enable: Add some newer AMD code names
* 3b9f152 chipset_enable: Probe AMD SPIBAR first and bail on ff
* 522160f meson: Add ft4222_spi
Nicholas Chin's patch fixes a bug on GM45 ThinkPads, where WX25
ICs (Winbond) could be read, but writes would fail in certain
cases because flashchips.c provided incorrect block erase commands.
This is unrelated to the --workaround-mx patch, for Macronix ICs.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We don't need the entire emulator, but we will be using
a specific part: src/mips/openbios
third_party/uC-sdk submodule is included, because it
contains the necessary header files when building open bios.
I will be adding Sony Playstation support to Libreboot,
alongside a new emulator project to be announced soon.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This program disables the Intel Boot Guard on Dell
OptiPlex 3050 Micro, via Intel ME modification.
Using this hack, you can run unsigned code on the ME.
Mate disabled BootGuard this way.
This will be used to add Dell OptiPlex 3050 Micro
support in Libreboot.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The workaround-mx patch was rebased on one section in spi.c,
because that part in upstream added QPI support; in the newly
rebase mx patch, the workaround_mx behaviour is only
honoured if QPI (Quad SPI) is not in use.
Quad SPI is not used in practise, on the machines where this
workaround is intended (GM45 ThinkPads with Macronix chips).
This imports the following upstream changes:
* 639d563 README: Update flashprog.org URLs
* cbbd601 README: Update dependency list and Linux package names
* 79451f1 README: Rename "Packaging" -> "Source Packaging"
* 5b4695c README: Dial laptop warning down a little
* 7224085 udev rules: Add some more IDs
* 448457a ch347_spi: Add CH347F ID and loop over the entries
* e39549b ch347_spi: Search for compatible USB interface
* dfd0647 ich_descriptors: Refactor component density handling
* b2ad9fd ich_descriptors: Make use of SPI_ENGINE_PCH100 marker
* 140e22f chipset_enable: Make use of SPI_ENGINE_PCH100 marker
* 869f0e7 ichspi: Use `swseq_data' on ICH7 paths too
* eeee91b ichspi: Replace all switch/case on `ich_generation'
* ecba1d8 ichspi: Drop redundant bail-out cases in ich_set_bbar()
* e8babf4 ichspi: Use a single check to enable hwseq for PCH100+
* fda324b ichspi: Introduce SPI_ENGINE_PCH100 marker
* a1f6476 ichspi: Split ICH7 init out
* 3f75d44 ich_descriptors: Remove `Dual Output Fast Read' for newer gens
* 2862011 spi25: Try to set volatile quad-enable (QE) automatically
* 4ac536b spi25_statusreg: Allow to write (non-)volatile bits specifically
* b1d2bae dediprog: Fix and enable 4BA modes for SF600Plus-G2
* d0afeef dediprog: Disable 4BA modes for SF100 w/ protocol v2
* 1b1deda Implement QPI support
* a1b7f35 dediprog: Implement multi-i/o reads
* 008a44f dediprog: Split read/write command preparation by protocol
* 4760b6e spi25: Implement multi-i/o reads
* 0c9af0a spi25: Check quad-enable (QE) bit
* 930d421 spi25: Introduce generic spi_prepare_io()/spi_finish_io()
* 8d0f465 spi25: Extract 4BA preparations into new `spi25_prepare.c`
* 044c9dc Add FT4222H support
* fc7c13c linux_gpio2_spi: Implement multi i/o
* 5fc3154 bitbang_spi: Implement multi-i/o
* d16a911 bitbang_spi: Move API into its own header file
* 226bb87 flashchips: Add missing QE-bit definitions
* 4fa39c5 flashchips: Fill multi-i/o gaps in MX25U family
* 5f50999 flashchips: Fill multi-i/o gaps in MX25R family
* 46552c8 flashchips: Fill multi-i/o gaps in MX25L family
* 96786d0 flashchips: Fill quad-i/o gaps in XM25Q family
* a26a3c6 flashchips: Fill dual-i/o gaps in W25X family
* 2133f59 flashchips: Fill quad-i/o gaps in W25Q family
* 68573af flashchips: Split GD25Q127C and GD25Q128C
* 4da971f flashchips: Fill quad-i/o gaps in GD25*Q families
* f7e2d97 spi: Allow to define a quad-enable (QE) configuration bit
* 1412d9f spi: Rework FEATURE_QPI
* d518563 spi: Prepare for multi i/o and dummy bytes
* bd72a47 spi25_statusreg: support reading/writing configuration register
* 3d728e7 spi25_statusreg.c: support reading security register
* a358b14 flashchips: Split W25Q64.W -> W25Q64DW | W25Q64FW/W25Q64JW...Q
* 3127db1 manibuilder: Drop legacy flashrom tag collections
* 619d9c0 manibuilder: Use `test_build.sh'
* 6560bba manibuilder/almalinux: Install `diffutils' for new `test_build.sh'
* c7b549e test_build.sh: Compare output for -L of Make and Meson builds
* 72b30a0 test_build.sh: Don't try to run cross-compiled programs
* 3d2f212 test_build.sh: Allow to override Make and Meson commands
* 4eb9748 test_build.sh: Run tests for both Make and Meson builds
* 8279457 manibuilder: Add Alpine Linux 3.18 & 3.19 images
* 15e9b10 manibuilder/alpine: Install libjaylink-dev when available
* b8b3593 manibuilder: Add images for Fedora 38..40
* 7b05f09 manibuilder: Add images for Ubuntu 24.04 "Noble Numbat"
* 5e8b339 manibuilder/anita: Add NetBSD 10.0 i386 & amd64 images
* 61da8c7 manibuilder/anita: Export library path for libusb
* 39152af manibuilder: Set sourcearcade.org as default source
* 20073e7 Properly clear erase-block selection when bigger block is chosen
* 3824c8d ichspi: Allow all opcodes when the "opmenu" isn't locked
* 0d4354e flashchips: Add W25Q32JV-.M
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
again: the "depend" variable must never be used for subprojects
that point to a subdirectory of the main project, because there's
no clean way of handling this in case of error conditions.
make it a submodule under config/submodules/. this is for the
documentation, including static site generator documentation,
and image files (photos).
as of this revision, there are now only those "depend" projects
defined in config/git/, where the destination directory of the
subject is not a subdirectory of the main project, so:
in a subsequest revision, i will mitigate an existing bug whereby
failure of the dependency project leaves the main one still
intact, breaking builds; this revision enables that to be done.
from now on, subproject-to-subdirectory-of-main-project will
be avoided in config/git/; config/submodules/ will be used.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
same as the previous patch, we must no longer use "define"
variables in config/git/ when the path is a subdirectory of
a given project, because it means that the download can only
happen after the main one, and currently if that fails, the
download of the main repo would remain intact, breaking future
builds in ways that we can't control - to be clear, it could
be controlled, but with added code complexity in the build
system, so:
put it in config/submodules/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't define it as a "depend" variable in config/git/,
because it means putting the files in a subdirectory of
an existing project was was already then downloaded, and
that means it can't be downloaded first; if the download
of it fails, the old download is left intact.
this bug isn't currently fixed in the build system, at all,
so this and other patches are being made to mitigate it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this brings the handling of serprog projects in sync
with canoeboot, which relies on the "depend" variable
to get the needed submodules, because cbmk does not
download submodules for these projects
lbmk does download submodules. i want it in sync with
cbmk for this, to make merging easier between both
projects, because i'm going to make a change on both
projects, whereby config/submodules/ is used exclusively
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it imports the same environmental variable fix because
i had the same buggy TMPDIR check there. i fixed that
upstream in untitled.
import the new untitled revision.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.
The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216
The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.
The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.
So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:
grubtree="xhci"
In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.
Several other design changes had to be made because of this:
* grub.cfg in memdisk no longer automatically jumps to one
in CBFS, but now shows a menuentry for it if available
* Certain commands in script/trees are disabled for GRUB,
such as *config make commands.
* gnulib is now defined in config/submodule/grub/, instead
of config/git/grub - and this mitigates an existing bug
where downloading gnulib first would make grub no longer
possible to download in lbmk.
The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.
The GRUB payload has been re-enabled on HP EliteBook 820 G2.
This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.
Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I've rebased the workaround-mx patch as follows. See:
commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4
Author: Nico Huber <nico.h@gmx.de>
Date: Fri Jan 13 01:19:07 2023 +0100
Let the flash context directly point to the used master
This change, now upstream in flashprog, made me have to do this in
the patch. I changed this:
flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf);
to this:
flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf);
It should work fine. This update imports the following upstream
patches from flashprog:
* 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347
* 72c9e40 meson: Check for CPU families with known raw mem access
* 3458220 platform/meson: Port pciutils/pci.h workaround to Meson
* f279762 platform/meson: Check for libi386 on NetBSD
* 14da5f7 README: Convert to Markdown
* 8ddea57 README: Document branching and release policy
* 2522456 util/list_yet_unsupported_chips.sh: Fix path
* cbf9c11 spi: Don't cross 16MiB boundaries with long writes
* 823a704 dediprog: Skip warning on first attempt to read device string
* e8463c8 dediprog: Revise prefix check for given programmer id
* 38af1a1 dediprog: Revise id matching
* 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting
* cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting
* 7679b5c spi25: Replace spi_read_chunked() with more abstract version
* ca1c7fd spi25: Normalize parameters of spi_nbyte_read()
* e36e3dc dediprog: Use default_spi_write_256
* 522a86d linux_spi: Use default_spi_read()/_write_256()
* 806509b cli_classic: Turn progress reporting into a progress bar
* 842d678 libflashrom: Return progress state to the library user
* aa714dd flashprog.c: Let select_erase_functions() return byte count
* 2eed4cf serprog: Add SPI Mode and CS Mode commands
* 821a085 dediprog: Implement id reading for SF600 and later
* 274e655 dediprog: Read device string early
* 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2
* fb176d2 dediprog: Use more general 4BA write mode for newer protocols
* 0ab5c3d dediprog: Split device type and version parsing
* bdef5c2 dediprog: Use unsigned conversions to parse device string
* 5262e29 dediprog: Try to request 32B device string (instead of 16B)
* e76e21f dediprog: Get rid of some unnecessary hex constants
* 5a09d1e udelay: Lower the sleep vs delay threshold
* 03ad4a4 linux_mtd: Provide no-op delay implementation
* 211c6ec serprog: Refine flushing before synchronization
* 383b7fe serprog: Test synchronicity before trying to synchronize
* d7318ea serprog: Move synchronicity test into separate function
* 9a11cbf Let the flash context directly point to the used master
* aabb3e0 writeprotect: Hook wp functions into the chip driver
* 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode`
* 929d2e1 internal: Pass programmer context down into chipset enables
* 7c717c3 internal: Pass programmer context down into board enables
* e3a2688 Pass programmer context to programmer->init()
* 2b66ad9 Start implementing struct flashprog_programmer
* 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME
* b197402 memory_bus: Split register mapping into own function
* 0e76d99 memory_bus: Move (un)map_flash_region into par master
* 9eec407 Perform default mapping only for respective chips
* 56b53dd wbsio_spi: Request memory mapping locally
* 5596190 it87spi: Request memory mapping locally
* 46449b4 spi25: Drop stale `bus == SPI` guards
* ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook
* 901fb95 Add prepare/finish_access() hooks for chip drivers
* a96aaa3 dediprog: Support long writes of 16MiB and more
* 1338936 Consider 4BA support when filtering erase functions
* 8d36db6 flashprog.8: Fix up serprog example
* d2ac303 flashprog.8: document new serprog cs parameter
* d1b9153 chipset_enable.c: Add Genoa to mendocino entry
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I'm on a schedule here and don't have time to do the
release changelog before actually compiling the release.
I'm pushing the release changelog / news announcement
*while the release is building*. Therefore, the actual
release archive will contain Libreboot documentation, but
from the lbwww revision just before the release announcement.
(a changelog file is still generated from Git, and included
in releases)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
GRUB has not pushed many patches to master since the recent 2.12
release, but there are a number of interesting fixes.
libreboot is doing a release soon. bump to latest grub revision.
Some of the new patches in GRUB are interesting:
XFS fixes:
"fs/xfs: Handle non-continuous data blocks in directory extents"
68dd65cfdaad08b1f8ec01b84949b0bf88bc0d8c
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370
Apparently, XFS could not boot in some reports, though this was
likely with BIOS or UEFI GRUB; no such reports were made to libreboot
"gfxmenu/view: Resolve false grub_errno disrupting boot process"
39c927df66c7ca62d97905d1385054ac9ce67209
"util/grub-fstest: Add a new command zfs-bootfs"
28c4405208cfb6e2cea737f6cbaf17e631bac6cd
The gnulib revision does not need to be updated at this time.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this merges the fix from:
https://codeberg.org/libreboot/pico-serprog/pulls/1
however, PRs are not to be sent there. riku merged it in
his repository, and i pulled it in the mirror hosted
on libreboot codeberg
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
should fix https://codeberg.org/libreboot/lbmk/issues/182
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
Riku introduced three new patches:
* Add support for multiple chip selects. This allows you to
control multiple chips from the same clip, on systems with
dual flash setups, at least theoretically.
* Enable pull-up on unused chip selects - pull them high so
that chips you connect that to are deactivated while flashing
the target chip. This could be used on thinkpad W541 for
instance, where miso/mosi have 0ohm between them via the two
flash ICs. You could pull the other chip select high.
* Documentation for the above, in the pico-serprog readme.
This goes in tandem with a patch from Riku, present in the
recently integrated flashprog project, namely:
commit ddb6d926783d4f9cbee04c7392718ed8f89daa0e
Author: Riku Viitanen <riku.viitanen@protonmail.com>
Date: Mon Jan 15 19:15:49 2024 +0200
serprog: Add support for multiple SPI chip selects
This functionality will therefore be present in the next
release of Libreboot.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Nico Huber is the rightful project lead. I do not support
the coup that occured within the flashrom project. Nico
has always been of great service to the Libreboot project,
by virtue of his work on both coreboot and flashrom.
Nico Huber was unfairly removed from the flashrom project
infrastructure, due to unfounded accusations hurled at him
by flashrom's new project lead. The accusations are unfounded
because no evidence was given.
Use Nico Huber's fork, named flashprog. We will work with
flashprog from now on.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Actually, it's 2 commits after 2.12, because there was a
patch added afterwards, fixing a build issue on Gentoo.
These changes are present in GRUB 2.12, relative to the
revision that we previously used on lbmk:
* b835601c7 build: Include grub-core/extra_deps.lst in dist
* 8961305b4 Bump version to 2.13
* 5ca9db22e Release 2.12
* 477a0dbd5 efi: Add support for reproducible builds
* dcc1af5d6 efi: Generate stack protector canary at build time if urandom is available
* e424e945c efi: Initialize canary to non-zero value
* 7c8ae7dcb gfxmenu/gui_image: Fix double free of bitmap
* 63fc253fc commands/acpi: Fix calculation of ACPI tables addresses when processing RSDT and XSDT
* f20123072 libnvpair: Support prefixed nvlist symbol names as found on NetBSD
* a13df3d15 bootstrap: Don't check gettext version
* 6d2aa7ee0 kern/mm: Use %x and cast for displaying sizeof()
* b3d49a697 configure: Add RPATH for freetype on NetBSD
* 52dbf66ea configure: Add *BSD font paths
* 2d6a89980 autogen: Accept python3.10 as a python alternative
* 3d4cb5a43 build: Rename HAVE_LIBZFS to USE_LIBZFS
* e4dbe5cfa gnulib: Tolerate always_inline attribute being ignored
* 31e47cfe2 util/editenv: Don't use %m formatter
* f5905f656 osdep/bsd/hostdisk: Fix NetBSD compilation
* cb1824a87 osdep/generic/blocklist: Fix compilation
* 2f3faf02c disk/diskfilter: Remove unused variable
* 3815acc57 build: Tolerate unused-but-set in generated lexer/bison files
* c129e44e7 loader/i386/bsdXX: Fix loading after unaligned module
* 89fbe0cac grub-core/Makefile.am: Make path to extra_deps.lst relative to $(top_srcdir)/grub-core
* 353beb80c util/grub-install: Move platdir path canonicalization after files were copied to grubdir
* f18a899ab util/grub-mkstandalone: Ensure deterministic tar file creation by sorting contents
* ed74bc376 util/grub-mkstandalone: Ensure stable timestamps for generated images
* 069cc46c9 net/http: Fix gcc-13 errors relating to type signedness
* e7a831963 templates: Reinstate unused version comparison functions with warning
* 3f9eace2d util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated
* e60015f57 efi: Set shim_lock_enabled even if validation is disabled
* e35683317 docs: Improve bli module documentation
* 57059ccb6 bli: Add explicit dependency on the part_gpt module
* 154dcb1ae build: Allow explicit module dependencies
* 17c68472d kern/ieee1275/init/ppc64: Display upper_mem_limit when debugging
* 5f8e091b6 kern/ieee1275/init/ppc64: Fix a comment
* dc569b077 kern/ieee1275/ieee1275: Display successful memory claims when debugging
* 0ac3d938a loader/powerpc/ieee1275: Use new allocation function for kernel and initrd
* 2a9a8518e kern/ieee1275/cmain/ppc64: Introduce flags to identify KVM and PowerVM
* 679691a13 kern/ieee1275/init/ppc64: Rename regions_claim() to grub_regions_claim()
* d49e86db2 kern/ieee1275/init/ppc64: Add support for alignment requirements
* fe5d5e857 kern/ieee1275/init/ppc64: Return allocated address using context
* ea2c93484 kern/ieee1275/init/ppc64: Decide by request whether to initialize region
* 0bb59fa9a kern/ieee1275/init/ppc64: Introduce a request for regions_claim()
* aa7c13226 fs/xfs: Add large extent counters incompat feature support
Most notable in the above log, that are beneficial to Libreboot
users, are:
aa7c13226 which improves XFS support (large extents), which is default
now on many setups.
ed74bc376 which introduces more stable timestamp generation when using
grub-mkstandalone. this is what lbmk uses to generate grub.elf, whereas
grub previously only implemented this fix on mkimage which we don't use
f18a899ab which ensures deterministic (reproducible) tar file creation
by sorting contents (file names / directories). this is done by sorting
the entries
f5905f656 which improves grub build system reliability on netbsd and
openbsd systems - useful for us because an ambition of lbmk is to port
the build system to run on bsd systems, and we will still want grub -
several other of the changes here are beneficial for BSD aswell, all
or most of them by Vladimir Serbinenko
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
riku committed a new patch, that fixes build errors
when PICO_DEFAULT_LED_PIN is not defined, on a given
board. in such cases, riku's new patch just disables
handling of the status LED, but LEDs continue to work
on boards where it is defined.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the new revision sets drive level to 12mA instead
of the default 4mA. 16-20mA is the maximum tolerated
level for data lines, on most flash ICs, so 12mA is
relatively safe.
riku did this a while ago, tested on pico pi.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Now the revision is:
64e3cee72ab8f5876abfebb263b5e6cf7c4a9a4e
The old revision was:
e58b870ff926415e23fc386af41ff81b2f588763
With this new revision update, the following patches have
been imported from the upstream GRUB project:
* 64e3cee72 gpt: Add compile time asserts for guid and gpt_partentry sizes
* 7de6fe963 types: Split aligned and packed guids
* 5fc985bfd gpt_partition: Mark grub_gpt_partentry as having natural alignment
* 7ad30299d efi: Deduplicate configuration table search function
* c6cf807fc lsefi: Add missing static qualifier
* a964e359b types: Fix typo
* 3f79e3b15 util/grub-mount: Check file path sanity
* 85e40b36e configure: Make the DJVU_FONT_SOURCE configurable with --with-dejavufont=FILE
* 2d6631d2a configure: Make the Unifont FONT_SOURCE configurable with --with-unifont=FILE
* 07318ee7e fs/xfs: Fix XFS directory extent parsing
* ad7fb8e2e fs/xfs: Incorrect short form directory data boundary check
* 4e10213de Revert "zfsinfo: Correct a check for error allocating memory"
* 4266fd2bb disk/i386/pc/biosdisk: Read up to 63 sectors in LBA mode
* cab04dcda kern/i386/pc/init: Flush cache only on VIA C3 and earlier
* 3c7e84257 fs/btrfs: Zero file data not backed by extents
* 4bcf6f747 kern/ieee1275/init: Restrict high memory in presence of fadump on ppc64
* cf58eca2a tests/util/grub-shell: Enable RNG device to better test stack smashing
* c3bdf263f kern/efi/init: Disable stack smashing protection on grub_efi_init()
* 95963d97f disk/cryptodisk: Add support for LUKS2 in (proc)/luks_script
* 016f14257 disk/cryptodisk: Optimize luks_script_get()
* f7a663c00 term/serial: Ensure proper NULL termination after grub_strncpy()
* a19e47ca4 commands/efi/lsefisystab: Print the UEFI specification revision in human readable form
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
now the docs are complete, in releases. they
contain the libreboot site, libreboot images,
the untitled static site generator and untitled
static site generator documentation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i haven't updated site.cfg yet
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
with this, you can just do:
cd src/docs
./build
the html files would then be available for
publishing, if you wish, or you could set up
a local httpd to view them.
if you have pandoc installed, this will build the
markdown files into html
untitled static site generator is what generates
the html files, from the markdown files, on the
website. it will now also be included in releases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's not used by anywhere else in lbmk, but the release build
script will automatically download each project named as per
file names in config/git/
this is a stupidly simply way to prove documentation in
libreboot releases, and i've used current revisions corresponding
to the Libreboot 20231021 release, for this 20231021 release
of lbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
notabug is unreliable, even as a backup.
why, just today, it was offline! all day.
i originally moved libreboot away from notabug,
to codeberg instead, but kept the notabug account
online, and i still push to it when it's online.
however, notabug seems to be in a terminal state
of neglect by its admins, so lbmk should not use it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
