| Age | Commit message (Collapse) | Author |
|---|
|
This brings in the following upstream changes:
* e060018 flashchips: Explicitly zero-initialize in .qpi_read_params
* ff9526b dediprog: Use dual-i/o default only for SF600Plus-G2
* 5a72cfb flashchips: Fix block-protection bits for 4BA Puya chips
* 284d55b flashchips: Add WPS bit description for GD25Q128C
* 37e07a8 flashchips: Add missing QE bit descriptions
* 3646b18 flashchips: Add GigaDevice GD25LF128E 166MHz, 1.8V part
* d4eb532 flashchips: Add GigaDevice GD25LF80E..GD25LF64E 166MHz, 1.8V parts
* 38d037f flashchips: Add GigaDevice GD25LB512MF..GD55LB02GF 1.8V parts
* 1da0293 flashchips: Add GigaDevice GD25LB512ME..GD55LB02GE 1.8V parts
* 6d728e6 flashchips: Add GigaDevice GD25B512MF..GD55B02GF 3.3V parts
* 493a4e0 flashchips: Update and split GD25Q256D entry
* 648dfdc spi25: Fix cosmetic debug-print error due to unitialized buffer
* cfd607d layout: Show a warning if no region is included
* ec287e2 ich_descriptors_tool: Change region name EC/BMC -> EC_BMC
* 39a4f7d sb600spi: Request more `lspci` details
* 404529d memory_bus.c: Add missing copyright notice
* fbea0fe udev rules: Restore mode/group configuration
* c90d6c4 flashchips: Add some 25LC series EEPROMs
* ee8cf1c Provide no-op probe function, always returning 1
* 4e6155a spi25: Add SPI25_EEPROM enum and handle < 3-byte addresses
* 9512c9c Add missing copyright notices to recently created files
* 06fbccc flashchips: Add GigaDevice GD25LB256E 1.8V part
* bc001da flashchips: Add some GigaDevice GD25L*256 1.8V parts
* 7d0f556 flashchips: Update GigaDevice 1.8V family up to GD25LQ128
* 7f8c12d flashchips: Add GigaDevice GD25LQ20, update family up to GD25LQ16
* 565471c flashchips: Add GigaDevice GD25B512ME..GD55B02GE 3.3V parts
* 6ee2f89 flashchips: Update GigaDevice GD25Q/B/R 128Mbit, 3.3V parts
* c230c69 flashchips: Add remaining Puya PY25Q..H 3.3V parts
* 06e0264 flashchips: Add Puya PY25Q..H family up to PY25Q128H
* fe21b43 flashchips: Add remaining P25Q..H family 3.3V chips
* 1c5d829 flashchips: Add Puya P25Q40SH, P25Q80SH, P25Q16SH 3.3V parts
* b0cae5e flashchips: Add Puya P25Q06H, P25Q11H, P25Q21H 3.3V parts
* b09136b flashchips: Add Puya P25Q05..16H 3.3V parts
* ed8b82c flashchips: Add Fudan FM25Q128 3.3V part
* 4a35134 flashchips: Add Fudan FM25Q08A 3.3V part
* 7f7bffa flashchips: Add Fudan FM25Q64, update FM25Q08..Q32
* c591518 flashchips: Add Fudan FM25Q02/Q04 3.3V parts
* fea6e16 flashchips: Add Winbond W25Q16JV_M (DTR version)
* 56d727e flashchips: Add newer gen. XTX Tech. XT25F..F 3.3V parts
* c64a803 flashchips: Add XTX Tech. XT25F..B 3.3V family
* 46e4209 flashchips: Add XTX Tech. XT25F02E/04D/08B 3.3V parts
* 6bc88e7 flashchips: Add Boya/BoHong BY25Q32/64/128 3.3V variants
* 3cddff4 flashchips: Complete Boya/BoHong BY25D family
* 34e3de6 flashchips: Add Zetta Device ZD25LQ64/128 1.8V parts
* f050370 selfcheck: Check dummy-cycle settings when QPI is advertised
* d40037a selfcheck: Check for WP functions when BP bits are given
* 2a1036b flashchips: Fix up GD25Q128C write-protect support
* d4e41d3 flashchips: Add SST26VF080A
* 04c1cf7 Add .envrc
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This brings in several important bug fixes from upstream.
With this, the following upstream changes have been imported:
* eb2c041 cli_wp: Fix bail-out when multiple chips are detected
* e05e334 cli_common: Rename local `optarg' variable
* efad610 manibuilder: Include NetBSD (anita tags) in `native' target
* 09289fb manibuilder: Replace unmaintained DEFAULT_TAGS list
* 1457cc6 manibuilder: Stop build testing oldest, EOL targets
* 1faffa5 manibuilder: Fix Ubuntu Noble Numbat (24.04) for amd64
* 61dbe36 udev rules: Use `uaccess' tag instead of `plugdev' group
* 63d30a2 install: Install binary into bin/, not sbin/
* 6ce26a7 flashchips: add Winbond W25R512NW / W74M51NW
* 612519b ichspi: Add Intel Arrow Lake support
* d5a61ef ichspi: Add Intel Lunar Lake support
* 5e0d9b0 ichspi: Add Intel Meteor Lake SoC
* 0ef2eb8 ichspi: Add Intel Snow Ridge SoC
* 42daab1 ichspi: Properly add Emmitsburg PCH
* af26008 ich_descriptors_tool: Add missing options for EHL & C620
* 82fe123 ich_descriptors: Hard code number of masters for newer gens
* 157b818 ich_descriptors: Guard MCH strap handling by chipset version
* db878fb ich_descriptors: Drop chipset detection based on `freq_read`
* b3cc2c6 ich_descriptors: Unify pretty printing of PCH100+ masters
* 8e4151d chipset_enable: Remove hidden-spidev workaround for Elkhart Lake
* 6d72efa chipset_enable: Remove hidden-spidev workaround for all 14nm PCHs
* 092a699 chipset_enable: Remove hidden-spidev workaround for TGP+
* 5bbd324 chipset_enable: Add missing PCI ID for Intel PCH H410
* a088475 chipset_enable: Factor PCH100 hidden-spidev workaround out
* 5eb7a58 Drop 1s delay before automatic verification
* 7427569 libflashprog: Run programmer_shutdown() on failed setup
* 5a9d6ea chipset_enable: Fix memory leaks introduced with AMD SPI100
* e149fbe Only try to check erase opcodes for SPI25 chips
* 07ebc68 Avoid NULL deref in check_block_eraser()
* 2405310 chipset_enable: Mark Intel QM87 as DEP
* 9897063 flashchips: Allow volatile register writes for W25Q128.V
* c972aed flashchips: Configure WP for MX25L25635F/45G
* 8f7122c cli: Add new write-protect CLI
* eed122d layout: Implement flashprog_layout_get_region_range()
* 1f693db cli: Add new `config' CLI for status/config registers
* 85c2cf8 cli: Implement "command" option parser
* 24c0977 cli: Add print function for generic CLI options
* b82aadc cli: Move some declarations into `cli.h`
* a705043 cli: Add a new CLI wrapper
* d39c7d6 cli: Extract basic CLI init into cli_common
* df6ce9f cli: Extract log argument parsing into cli_common
* 0da839b cli: Extract layout argument processing
* d91822a cli: Extract layout argument parsing into cli_common
* e7899a9 cli: Move all long-option keys into cli.h
* 34e783a cli: Extract flash argument parsing into cli_common
* e68b08b cli_classic: Rewrite programmer argument parsing
* 6898f5b spi25_statusreg: Prefer volatile status register writes
* 55e7884 Introduce FLASHPROG_FLAG_NON_VOLATILE_WRSR
* fbba454 Install udev rules
* 768cfc4 flashchips: Add GigaDevice GD25LR512ME
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This brings in the following important fix:
commit d128a0ae87086b37c0e5d7a8d934bcdee173402f
Author: Nicholas Chin <nic.c3.14@gmail.com>
Date: Fri Sep 27 22:57:22 2024 -0600
flashchips: Remove unsupported erase blocks for Winbond W25X{16,32,64}
This family of chips does not support the 0x52 (32 KiB block erase) and
0x60 (chip erase) opcodes according to their datasheet.
The full list of changes this brings in is as follows:
* d128a0a flashchips: Remove unsupported erase blocks for Winbond W25X{16,32,64}
* c6a924a Don't mention writing when erasing only (-E)
* dac4239 ch347_spi: Add 'spimode' parameter
* 56d236b chipset_enable: Add some newer AMD code names
* 3b9f152 chipset_enable: Probe AMD SPIBAR first and bail on ff
* 522160f meson: Add ft4222_spi
Nicholas Chin's patch fixes a bug on GM45 ThinkPads, where WX25
ICs (Winbond) could be read, but writes would fail in certain
cases because flashchips.c provided incorrect block erase commands.
This is unrelated to the --workaround-mx patch, for Macronix ICs.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The workaround-mx patch was rebased on one section in spi.c,
because that part in upstream added QPI support; in the newly
rebase mx patch, the workaround_mx behaviour is only
honoured if QPI (Quad SPI) is not in use.
Quad SPI is not used in practise, on the machines where this
workaround is intended (GM45 ThinkPads with Macronix chips).
This imports the following upstream changes:
* 639d563 README: Update flashprog.org URLs
* cbbd601 README: Update dependency list and Linux package names
* 79451f1 README: Rename "Packaging" -> "Source Packaging"
* 5b4695c README: Dial laptop warning down a little
* 7224085 udev rules: Add some more IDs
* 448457a ch347_spi: Add CH347F ID and loop over the entries
* e39549b ch347_spi: Search for compatible USB interface
* dfd0647 ich_descriptors: Refactor component density handling
* b2ad9fd ich_descriptors: Make use of SPI_ENGINE_PCH100 marker
* 140e22f chipset_enable: Make use of SPI_ENGINE_PCH100 marker
* 869f0e7 ichspi: Use `swseq_data' on ICH7 paths too
* eeee91b ichspi: Replace all switch/case on `ich_generation'
* ecba1d8 ichspi: Drop redundant bail-out cases in ich_set_bbar()
* e8babf4 ichspi: Use a single check to enable hwseq for PCH100+
* fda324b ichspi: Introduce SPI_ENGINE_PCH100 marker
* a1f6476 ichspi: Split ICH7 init out
* 3f75d44 ich_descriptors: Remove `Dual Output Fast Read' for newer gens
* 2862011 spi25: Try to set volatile quad-enable (QE) automatically
* 4ac536b spi25_statusreg: Allow to write (non-)volatile bits specifically
* b1d2bae dediprog: Fix and enable 4BA modes for SF600Plus-G2
* d0afeef dediprog: Disable 4BA modes for SF100 w/ protocol v2
* 1b1deda Implement QPI support
* a1b7f35 dediprog: Implement multi-i/o reads
* 008a44f dediprog: Split read/write command preparation by protocol
* 4760b6e spi25: Implement multi-i/o reads
* 0c9af0a spi25: Check quad-enable (QE) bit
* 930d421 spi25: Introduce generic spi_prepare_io()/spi_finish_io()
* 8d0f465 spi25: Extract 4BA preparations into new `spi25_prepare.c`
* 044c9dc Add FT4222H support
* fc7c13c linux_gpio2_spi: Implement multi i/o
* 5fc3154 bitbang_spi: Implement multi-i/o
* d16a911 bitbang_spi: Move API into its own header file
* 226bb87 flashchips: Add missing QE-bit definitions
* 4fa39c5 flashchips: Fill multi-i/o gaps in MX25U family
* 5f50999 flashchips: Fill multi-i/o gaps in MX25R family
* 46552c8 flashchips: Fill multi-i/o gaps in MX25L family
* 96786d0 flashchips: Fill quad-i/o gaps in XM25Q family
* a26a3c6 flashchips: Fill dual-i/o gaps in W25X family
* 2133f59 flashchips: Fill quad-i/o gaps in W25Q family
* 68573af flashchips: Split GD25Q127C and GD25Q128C
* 4da971f flashchips: Fill quad-i/o gaps in GD25*Q families
* f7e2d97 spi: Allow to define a quad-enable (QE) configuration bit
* 1412d9f spi: Rework FEATURE_QPI
* d518563 spi: Prepare for multi i/o and dummy bytes
* bd72a47 spi25_statusreg: support reading/writing configuration register
* 3d728e7 spi25_statusreg.c: support reading security register
* a358b14 flashchips: Split W25Q64.W -> W25Q64DW | W25Q64FW/W25Q64JW...Q
* 3127db1 manibuilder: Drop legacy flashrom tag collections
* 619d9c0 manibuilder: Use `test_build.sh'
* 6560bba manibuilder/almalinux: Install `diffutils' for new `test_build.sh'
* c7b549e test_build.sh: Compare output for -L of Make and Meson builds
* 72b30a0 test_build.sh: Don't try to run cross-compiled programs
* 3d2f212 test_build.sh: Allow to override Make and Meson commands
* 4eb9748 test_build.sh: Run tests for both Make and Meson builds
* 8279457 manibuilder: Add Alpine Linux 3.18 & 3.19 images
* 15e9b10 manibuilder/alpine: Install libjaylink-dev when available
* b8b3593 manibuilder: Add images for Fedora 38..40
* 7b05f09 manibuilder: Add images for Ubuntu 24.04 "Noble Numbat"
* 5e8b339 manibuilder/anita: Add NetBSD 10.0 i386 & amd64 images
* 61da8c7 manibuilder/anita: Export library path for libusb
* 39152af manibuilder: Set sourcearcade.org as default source
* 20073e7 Properly clear erase-block selection when bigger block is chosen
* 3824c8d ichspi: Allow all opcodes when the "opmenu" isn't locked
* 0d4354e flashchips: Add W25Q32JV-.M
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
