summaryrefslogtreecommitdiff
path: root/config/flashprog/patches/0001-Workaround-for-MX25-chips.patch
AgeCommit message (Collapse)Author
2024-08-11flashprog: bump to 639d563 (2024-08-02)Leah Rowe
The workaround-mx patch was rebased on one section in spi.c, because that part in upstream added QPI support; in the newly rebase mx patch, the workaround_mx behaviour is only honoured if QPI (Quad SPI) is not in use. Quad SPI is not used in practise, on the machines where this workaround is intended (GM45 ThinkPads with Macronix chips). This imports the following upstream changes: * 639d563 README: Update flashprog.org URLs * cbbd601 README: Update dependency list and Linux package names * 79451f1 README: Rename "Packaging" -> "Source Packaging" * 5b4695c README: Dial laptop warning down a little * 7224085 udev rules: Add some more IDs * 448457a ch347_spi: Add CH347F ID and loop over the entries * e39549b ch347_spi: Search for compatible USB interface * dfd0647 ich_descriptors: Refactor component density handling * b2ad9fd ich_descriptors: Make use of SPI_ENGINE_PCH100 marker * 140e22f chipset_enable: Make use of SPI_ENGINE_PCH100 marker * 869f0e7 ichspi: Use `swseq_data' on ICH7 paths too * eeee91b ichspi: Replace all switch/case on `ich_generation' * ecba1d8 ichspi: Drop redundant bail-out cases in ich_set_bbar() * e8babf4 ichspi: Use a single check to enable hwseq for PCH100+ * fda324b ichspi: Introduce SPI_ENGINE_PCH100 marker * a1f6476 ichspi: Split ICH7 init out * 3f75d44 ich_descriptors: Remove `Dual Output Fast Read' for newer gens * 2862011 spi25: Try to set volatile quad-enable (QE) automatically * 4ac536b spi25_statusreg: Allow to write (non-)volatile bits specifically * b1d2bae dediprog: Fix and enable 4BA modes for SF600Plus-G2 * d0afeef dediprog: Disable 4BA modes for SF100 w/ protocol v2 * 1b1deda Implement QPI support * a1b7f35 dediprog: Implement multi-i/o reads * 008a44f dediprog: Split read/write command preparation by protocol * 4760b6e spi25: Implement multi-i/o reads * 0c9af0a spi25: Check quad-enable (QE) bit * 930d421 spi25: Introduce generic spi_prepare_io()/spi_finish_io() * 8d0f465 spi25: Extract 4BA preparations into new `spi25_prepare.c` * 044c9dc Add FT4222H support * fc7c13c linux_gpio2_spi: Implement multi i/o * 5fc3154 bitbang_spi: Implement multi-i/o * d16a911 bitbang_spi: Move API into its own header file * 226bb87 flashchips: Add missing QE-bit definitions * 4fa39c5 flashchips: Fill multi-i/o gaps in MX25U family * 5f50999 flashchips: Fill multi-i/o gaps in MX25R family * 46552c8 flashchips: Fill multi-i/o gaps in MX25L family * 96786d0 flashchips: Fill quad-i/o gaps in XM25Q family * a26a3c6 flashchips: Fill dual-i/o gaps in W25X family * 2133f59 flashchips: Fill quad-i/o gaps in W25Q family * 68573af flashchips: Split GD25Q127C and GD25Q128C * 4da971f flashchips: Fill quad-i/o gaps in GD25*Q families * f7e2d97 spi: Allow to define a quad-enable (QE) configuration bit * 1412d9f spi: Rework FEATURE_QPI * d518563 spi: Prepare for multi i/o and dummy bytes * bd72a47 spi25_statusreg: support reading/writing configuration register * 3d728e7 spi25_statusreg.c: support reading security register * a358b14 flashchips: Split W25Q64.W -> W25Q64DW | W25Q64FW/W25Q64JW...Q * 3127db1 manibuilder: Drop legacy flashrom tag collections * 619d9c0 manibuilder: Use `test_build.sh' * 6560bba manibuilder/almalinux: Install `diffutils' for new `test_build.sh' * c7b549e test_build.sh: Compare output for -L of Make and Meson builds * 72b30a0 test_build.sh: Don't try to run cross-compiled programs * 3d2f212 test_build.sh: Allow to override Make and Meson commands * 4eb9748 test_build.sh: Run tests for both Make and Meson builds * 8279457 manibuilder: Add Alpine Linux 3.18 & 3.19 images * 15e9b10 manibuilder/alpine: Install libjaylink-dev when available * b8b3593 manibuilder: Add images for Fedora 38..40 * 7b05f09 manibuilder: Add images for Ubuntu 24.04 "Noble Numbat" * 5e8b339 manibuilder/anita: Add NetBSD 10.0 i386 & amd64 images * 61da8c7 manibuilder/anita: Export library path for libusb * 39152af manibuilder: Set sourcearcade.org as default source * 20073e7 Properly clear erase-block selection when bigger block is chosen * 3824c8d ichspi: Allow all opcodes when the "opmenu" isn't locked * 0d4354e flashchips: Add W25Q32JV-.M Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26flashprog: bump to 5b4fdd1 from 2 May 2024Leah Rowe
I've rebased the workaround-mx patch as follows. See: commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4 Author: Nico Huber <nico.h@gmx.de> Date: Fri Jan 13 01:19:07 2023 +0100 Let the flash context directly point to the used master This change, now upstream in flashprog, made me have to do this in the patch. I changed this: flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf); to this: flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf); It should work fine. This update imports the following upstream patches from flashprog: * 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347 * 72c9e40 meson: Check for CPU families with known raw mem access * 3458220 platform/meson: Port pciutils/pci.h workaround to Meson * f279762 platform/meson: Check for libi386 on NetBSD * 14da5f7 README: Convert to Markdown * 8ddea57 README: Document branching and release policy * 2522456 util/list_yet_unsupported_chips.sh: Fix path * cbf9c11 spi: Don't cross 16MiB boundaries with long writes * 823a704 dediprog: Skip warning on first attempt to read device string * e8463c8 dediprog: Revise prefix check for given programmer id * 38af1a1 dediprog: Revise id matching * 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting * cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting * 7679b5c spi25: Replace spi_read_chunked() with more abstract version * ca1c7fd spi25: Normalize parameters of spi_nbyte_read() * e36e3dc dediprog: Use default_spi_write_256 * 522a86d linux_spi: Use default_spi_read()/_write_256() * 806509b cli_classic: Turn progress reporting into a progress bar * 842d678 libflashrom: Return progress state to the library user * aa714dd flashprog.c: Let select_erase_functions() return byte count * 2eed4cf serprog: Add SPI Mode and CS Mode commands * 821a085 dediprog: Implement id reading for SF600 and later * 274e655 dediprog: Read device string early * 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2 * fb176d2 dediprog: Use more general 4BA write mode for newer protocols * 0ab5c3d dediprog: Split device type and version parsing * bdef5c2 dediprog: Use unsigned conversions to parse device string * 5262e29 dediprog: Try to request 32B device string (instead of 16B) * e76e21f dediprog: Get rid of some unnecessary hex constants * 5a09d1e udelay: Lower the sleep vs delay threshold * 03ad4a4 linux_mtd: Provide no-op delay implementation * 211c6ec serprog: Refine flushing before synchronization * 383b7fe serprog: Test synchronicity before trying to synchronize * d7318ea serprog: Move synchronicity test into separate function * 9a11cbf Let the flash context directly point to the used master * aabb3e0 writeprotect: Hook wp functions into the chip driver * 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode` * 929d2e1 internal: Pass programmer context down into chipset enables * 7c717c3 internal: Pass programmer context down into board enables * e3a2688 Pass programmer context to programmer->init() * 2b66ad9 Start implementing struct flashprog_programmer * 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME * b197402 memory_bus: Split register mapping into own function * 0e76d99 memory_bus: Move (un)map_flash_region into par master * 9eec407 Perform default mapping only for respective chips * 56b53dd wbsio_spi: Request memory mapping locally * 5596190 it87spi: Request memory mapping locally * 46449b4 spi25: Drop stale `bus == SPI` guards * ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook * 901fb95 Add prepare/finish_access() hooks for chip drivers * a96aaa3 dediprog: Support long writes of 16MiB and more * 1338936 Consider 4BA support when filtering erase functions * 8d36db6 flashprog.8: Fix up serprog example * d2ac303 flashprog.8: document new serprog cs parameter * d1b9153 chipset_enable.c: Add Genoa to mendocino entry Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-28flashprog: apply the good old MX25 workaroundRiku Viitanen
generated by cgit v1.2.1 (git 2.18.0) at 2024-09-19 17:58:28 +0000