| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, the recent fix to coreboot builds breaks
seabios builds.
lbmk should be stable now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
only do if config=y. this reintroduces a hack that
i accidentally removed in the recent redesign.
grub has been changed to noconfig=y, and the files
for memdisk are now source from config/data/grub
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we currently distinguish, by virtue of logic, multi-
and single-tree projects. this introduces a lot of
complexity, so the following patch has removed this
distinction. all single-tree projects are now multi
tree, but with only one tree.
other design changes:
config/git removed. rev/tree now handled with mkhelper
and target configs. this allows per-tree remote handling,
so we could (for example) add the mrchromebox coreboot
fork easily, for specific chromebook models.
config/project is now config/module/project. this
cleans up the main config/ directory.
cfgname variable: .config no longer hardcoded when
doing configs in projects. it is configurable with
this variable. if unset, the previous .cfg is used
noconfig variable: set this in target/mkhelper
configs, and config/module/project/tree/config/ is
unused; instead, make is called without config copying.
a "noconfig" placeholder is used. this enables cleaner
usage of previously single-tree projects in the new
multi-tree-only structure.
cfgvars: variables reinitialised in project config are
cleaned more reliably. in particular, several variables
e.g. autogenargs were not being reset between projects,
although the autogenargs variable is currently unused.
general cleanup has been conducted across the build
system, as part of this redesign. several parts of the
build system more over-engineered as a result of the
previous design, and the new design enabled a severe
reduction in sloccount (75 lines reduced in lbmk).
yes, this change *adds features* but there are fewer
lines of code than before. this is the best kind of
change. way better than the 3-line-diff. yes.
rev= and tree= are set more centrally in configs. the
mkhelper config can be used to set url/url_bkup, but
individual trees can override them.
configs have been cleaned up, with several variables
now much more heavily centralised. config/git/ was
used before to first download the bare repository, and
then the real clone was made with patches. this allows
git repositories to be cached for future re-builds.
with config/git/ gone, the download logic for projects
is more centrally implemented. a separate call to ./mk -f
is no longer performed, and in fact ./mk -f never needs
to be used anymore as a result. ./mk -f now is basically
the same thing as -b, just without any action performed.
this change will allow rapid expansion of the libreboot
project. i want to add hundreds of chromebooks to the
project, using mrchromebox, but the previous design did
not permit this. this change means that i can easily have
unlimited upstreams per project. coreboot will, in some
follow-up changes, have the following upstreams:
coreboot/default: coreboot.org
coreboot/fam15h: 15h.org fork
coreboot/chromebook: mrchromebox fork
this can now be done freely without massive changes to
the build system. under the previous design, i worked on
a now-abandoned patch to do N remotes per project, reading
repo links from a file. this meant that i'd have coreboot.org
first (main and backup), then mrchromebox. this meant that
lbmk would failover through to mrchromebox, wasting time
for the user.
this new design is much cleaner, and will enable the
project to be maintained much more easily.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the user never runs these. it's not needed. the design
of lbmk already cleans everything, or caches everything,
between builds. everything cached out of tree.
it's not expected to ever need to clean manually, so just
remove the option. knobs are for nobs.
releases don't need it either, because we tar everything
before building, thus eliminating all build artifacts.
we do this on a fresh copy of lbmk on ./mk release
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
libreboot's policy is to thoroughly clean sources per
build, because we cache builds out of tree and avoid
re-builds if they exist; these and the sources are
deleted if metadata in config/ changes per project,
tree and/or target.
the problem is that this change only affects lbmk.git
it doesn't affect release archives, where project sources
do not have git-init applied to them. this will be
addressed.
can't use it on coreboot, because it will delete xgcc
tarballs in a way currently not handled, and handling
it will mean adding a project-specific hack.
the xgcc tarballs could be built out-of-tree, and this
will have to be done, otherwise coreboot will have to be
made gitclean="y" for now.
everything else is fair game.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
yes, make it generalised. use a new variable in
mkhelper.cfg, gitclean and gitcleanargs
not enabled by default, but u-boot enables it. i'm
considering whether to use this by default, as it
is the general policy of lbmk to clean everything
just after a build, as builds are cached out of
tree. this way, we can do re-builds safely for each
project. there are probably a lot of subtle bugs that
might be fixed if we used this
the problem is that this is currently only used on
lbmk.git, but not on libreboot release archives which
lack .git directories; the main one is initialised in
lbmk, but not in upstream sources. we could just initialise
those.
in fact, that is probably what i'm going to do.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
|
|
This brings these extra changes:
* eaa3b8f0f Bump version to 2.15
* d38d6a1a9 Release 2.14
* 35bfd6c47 build: Add grub-core/tests/crypto_cipher_mode_vectors.h file to EXTRA_DIST
* ac042f3f5 configure: Print a more helpful error if autoconf-archive is not installed
* e37d02158 kern/ieee1275/openfw: Add a check for invalid partition number
* f94eae0f8 grub-mkimage: Do not generate empty SBAT metadata
* 1aa0dd0c0 configure: Defer check for -mcmodel=large until PIC/PIE checks are done
* ff1edd975 util/grub-mkimagexx: Stop generating unaligned appended signatures
* 51ebc6f67 tests: Add functional tests for ecb/cbc helpers
* caaf50b9a osdep/aros/hostdisk: Fix use-after-free bug during MsgPort deletion
* 18f08826f kern/efi/sb: Enable loading GRUB_FILE_TYPE_CRYPTODISK_ENCRYPTION_KEY and GRUB_FILE_TYPE_CRYPTODISK_DETACHED_HEADER
NOTE: This patch was reversed:
* ac042f3f5 configure: Print a more helpful error if autoconf-archive is not installed
Because it quite unhelpfully broke the build.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Since the libgcrypt update in GRUB, which imported
GNU's own Argon2 implementation, other ciphers have
also been introduced.
This patch adds them to lbmk's GRUB build.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I realised that the Dell OptiPlex 3050 Micro has NVRAM available.
Use that backend, and hardcode power_on_after_fail to Disable,
which is already done in cmos.default.
The Lenovo ThinkPad T480 currently has no option table in coreboot,
besides the CBFS one. For this, the CBFS option table has been
enabled, and the build system has been modified to insert
a relevant config for power_on_after_fail.
Nicholas Chin informs me that Kabylake generally has legacy NVRAM,
so enabling it for the T480/T480s should work, but we'll need
to use it in the future anyway; better to just use CBFS now.
I *could* use the CBFS backend on 3050micro as well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
and add a line break where it is used
now it is essentially a macro of sorts, used in
terms of syntax, to mean the same as:
if [ "$dry" != ":" ]; do
thing
fi
in this case, we say:
$if_not_dry_build \
thing
yes. macros in sh are a thing.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we have the "default" tree, then the "nvme" tree which adds
nvme support.
the "xhci" tree adds xhci patches, *and* nvme patches.
riku suggested that i rename it accordingly, and his advice
was quite correct, indeed wise.
this will reduce confusion for contributors, including *myself*.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
bsdunzip in particular, can be used instead of relying
on the host to provide unzip.
most linux hosts use info-zip as the implementation,
which bsdzip is compatible with.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This is for bsdtar, which we will use in place
of unar, because unar is not available on all
of the distros, and we had some recent problems
with it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 4999a49de39667b3239fc2010d0e99c958b29417.
|
|
the newer way handles escaped characters better, and it
can be nested more easily. it's also more readable.
personally, i prefer the old way, because it's more
minimalist, but it occurs to me that a lot of people
nowadays don't know about backticks, but they do know
of the modern way.
to make the code more readable, i have modernised it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This was a problem when I did it before, because individual
target builds weren't automatically re-compiled when needed.
The recent design improvements in lbmk enable this to be
done again.
Cached images in elf/ have no payloads, so they are a liability,
therefore they are padded by one byte to prevent flashing. This
solves the problem that the previous caching had.
With this change, modifying payloads can be tested without
needing to re-build coreboot each time.
The cached coreboot builds are also automatically re-built when
needed, which is another improvement this time, compared to
the last time coreboot builds were cached in this manner.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as opposed to target/
for example:
image the command:
./mk -b u-boot amd64coreboot
This would put the U-Boot binaries here:
elf/u-boot/amd64coreboot/default/
With this change, they now go here:
elf/u-boot/x86_64/amd64coreboot/default/
This solves a problem that existed previously, where
you could modify a given tree in a multi-tree project,
but cached builds for targets branching separately off
of each tree would not be deleted, and thus not re-built.
This accomplishes such a result, without needing to
further check hashes of individual targets.
The latter will still be done, in a future change, because
this change doesn't fix another problem:
If you change a given config, e.g. targetname "foo" which
uses tree "bar", elf/foo/ would not be removed automatically
for re-build.
So this change only deletes individual target builds when
their master tree changes.
Where the target and tree are the same, this also means
elf/tree/target/
for example: seabios/default would create binaries in:
elf/seabios/default/default/
not:
elf/seabios/default/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
NOTE: gfxterm_menu module removed, because of this
change by upstream:
commit ca2a91f43bf6e1df23a07c295534f871ddf2d401
Author: Glenn Washburn <development@efficientek.com>
Date: Mon May 5 16:11:36 2025 -0500
tests: Disable gfxterm_menu and cmdline_cat tests
This brings in the following changes from upstream:
* a68a7dece loader/i386/pc/linux: Fix resource leak
* de80acf36 loader/efi/linux: Unload previous Linux kernel/initrd before updating kernel size
* 249db11d8 loader/efi/linux: Correctly terminate load_options member
* f3b339af1 loader/efi/linux: Use sizeof() instead of constant
* c2b2e0dcf loader/efi/linux: Use proper type for len variable
* de4e8e2aa loader/efi/linux: Do not pass excessive size for source string
* 8c8f96664 loader/efi/linux: Remove useless assignment
* 8ebf155af include/grub/charset.h: Update documentation
* 2f2ed28d5 Revert "lzma: Make sure we don't dereference past array"
* 2539ede82 tests/util/grub-shell: Correct netboot and file_filter test failure
* 8c2d4e64f normal/charset: Fix underflow and overflow in loop init
* ba8eadde6 dl: Provide a fake grub_dl_set_persistent() and grub_dl_is_persistent() for the emu target
* 409e72ced util/grub-protect: Correct uninit "err" variable
* 5eca564b1 gnulib: Bring back the fix for resolving unused variable issue
* ac1512b87 gnulib: Add patch to allow GRUB w/GCC-15 compile
* db506b3b8 gnulib/regexec: Fix resource leak
* bba7dd736 gnulib/regcomp: Fix resource leak
* 91cb7ff6b tests/tpm2_key_protector_test: Add tests for SHA-384 PCR bank
* 451e227e5 tpm2_key_protector: Dump the PCR bank for key unsealing
* 11caacdb2 util/grub-protect: Fix the hash algorithm of PCR digest
* ce23919ca build: Add new header files to dist to allow building from tar
* e3b15bafd build: Remove extra_deps.lst from EXTRA_DIST
* 40e261b89 lib/LzmaEnc: Validate "len" before subtracting
* 86e8f2c4b osdep/unix/hostdisk: Fix signed integer overflow
* 438f05581 disk/luks2: Add attempting to decrypt message to align with luks and geli modules
* 20e6d0c4a osdep/linux/getroot: Detect DDF container similar to IMSM
* b71bc0f8b fs/fshelp: Avoid possible NULL pointer deference
* 272ff81cb fs/ntfs: Correct possible infinite loops/hangs
* 8c95307a0 fs/ntfs: Correct possible access violations
* 06914b614 fs/ntfs: Correct attribute vs attribute list validation
* 0e1762c8a fs/ntfs: Correct regression with run list calculation
* be303f8c1 lib/envblk: Ignore empty new lines while parsing env files
* 34bd00ee2 fs/zfs: Fix another memory leak in ZFS code
* ca2a91f43 tests: Disable gfxterm_menu and cmdline_cat tests
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it mainly does general tasks, like handling utils
and enabling ccache. the vfiles are a small part.
rename the function accordingly. it is called by
premake, so let's call it corebootpremake.
this change will also make sense when cherry-picked
into cbmk, which does not handle vfiles at all.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
define it with a single variable, rather than several.
this allows several checks to be greatly simplified.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Instead of calling fe_, prefix x_ as indicated.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
sh macros ftw
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove it from mkhelper files, because rom.sh doesn't
initialise any variables globally, except one that
never changes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Many users report bugs, so I'm reverting lbmk back to only
supporting the rp2040 dongles for the time being. The
documentation will be updated to reflect this.
Pico2 support will be re-added at a later date, once more
testing has been done, and fixes made if necessary.
|
|
this is a file containing one byte, of value zero
i meant to add it in previous commits, for the resizing
and shrinking of tarballs when inserting or deleting
vendor files
used by include/vendor.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This is currently the latest revision of coreboot.
Other coreboot trees to follow. The "next" tree will
also be merged with coreboot/default, in a follow-up
commit.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
code equals bugs. code that doesn't exist can't
have bugs, so it is superior by definition.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
instead of running pwd all the time, run it once in lib.sh,
and export PWD.
for lbmk-specific use of PWD, use xbmkpwd, which contains
the value of PWD as was set by the pwd utility in lib.sh.
many parts of lbmk rely on pwd, and it *must* be correct.
this change adds basic error handling, since pwd can in
fact return errors in some cases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
PWD could be anything, if the user manually exported
it before running lbmk.
always run pwd instead, to get the real string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We were previously not handling picotool at all, and
pico-sdk would download picotool itself, at build time.
This means that the source archive, if created, would
not contain picotool. While not strictly required, for
complete corresponding source, since it's a toolchain
and not the actual pico-serprog firmware, it is my policy
that releases must include full corresponding source code,
when it is feasible to do so.
I must say, I intensely dislike cmake, with such burning
passion; I am thoroughly displeased by how hacky this is,
but it works and now nothing is in my way for a Libreboot
20241206 rev8 release!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Previously serprog_rp2040, but we now also support
the RP2530 boards.
Therefore, serprog_pico is a nice generic name. The
directory on release archives will now be serprog_pico
instead of serprog_rp2040; it will contain serprog images
for both RP2040 and RP2530 devices.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The appdir.patch file was used on the older deguard
version, prior to Mate Kukri's rewrite. This patch is
no longer required, and no longer used, so it can be
removed safely from lbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in this setup, seabios is never the default payload, grub is,
but only if grub is enabled.
set this in target.cfg:
payload_grubsea="y"
if payload_grub isn't enabled, this is auto-set to n
ditto if initmode=normal
NOTE: if flashing libgfx setups, you should make sure
that you're not booting with a graphics card, only intel
graphics. this setting will intentionally not be documented,
because it's not recommended, but is being implemented for
testing purposes (and i implemented it for some guy who i
think is cool). i'll probably also use this myself, since
i already do grub-only setups on all my own machines.
seagrub is the default on x86 because of past instabilities
with grub. to mitigate in case of future issues, since seabios
is always stable, we reduce the chance of bricks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
libreboot has a lot of users worldwide, some of whom live in
countries that punish being gay; if they look at libreboot or
boot it and it has the pride colours on it, it could actually
get them in trouble.
this fact occured to me, and i've decided therefore to revert
back to the boring plain logo.
though, perhaps we could actually properly design a new logo?
a new, modern logo, and a nicer website.
we'll see!
This reverts commit 401efb24b2213454732e769531f660605771e538.
|
|
same as on u-boot recently
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 5b4c9158e5a79f8d7e776c8c4ece69dda5aa8690.
|
|
On coreboot for example, as Mate has told me, if you're
making Kconfig changes and re-compiling, sometimes the
actual image that you build might still have the old one
in it, due to how coreboot's build system works.
To mitigate this, you can just always run distclean before
doing the build, but lbmk was doing just clean.
In practise, we did not find any issues, but this change should
be harmless, and might prevent such issues in the future. It's
even possible that we might have already encountered this before
and not realised, and we were just lucky that no noticeable issues
were caused.
It's *also* possible that the reverse is true: an issue that
was previously covered up, then that issue will now be exposed.
However, if that turns out to be true, then that is good because
we are exposing said bugs and then we will know to fix them!
Anyway, the variable in target.cfg is:
cleancmd="whatever_you_want"
e.g.
cleancmd="distclean"
You may also specify this in global mkhelper.cfg files, per
project; I've already done this for SeaBIOS, coreboot
and U-Boot, since all of these use Kconfig files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Same concept as SeaGRUB, but for U-Boot. SeaBIOS starts, but
has a bootorder file loading U-Boot first, from flash.
You can interrupt it with the ESC menu, to boot something else
in SeaBIOS, including GRUB.
With this, we can effectively provide extremely user-friendly
UEFI-first setups in Libreboot.
Take that, edk2!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The previous stability issues were resolved, thanks to
the previous revision which added a fix courtesy Simon Glass.
This reverts commit eba73c778a85d1c6ad2f0de57c82a8775cdd1c17.
|
