| Age | Commit message (Collapse) | Author |
|---|
|
Commit 3ee4cc9ddec62276c374f8c7f0c0b3322cfaa9f6 (fix typo in dell
latitude coreboot coreboot config) fixed a typo from ${VARIANT_DIR) to
$(CONFIG_VARIANT_DIR). While this does work, since CONFIG_VARIANT_DIR is
a valid variable, it is not technically correct, as the default VBT path
set by coreboot's Kconfig files uses $(VARIANT_DIR), which is the same
as CONFIG_VARIANT_DIR, but with quotes stripped out.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
these configs were otherwise correct, but i typo'd a variable
in them when manually rebasing the old configs, after switching
to nicholas's new ports implemented as variants, where the old
ones in lbmk were individual board ports for those same boards.
Signed-off-by: Leah Rowe <info@minifree.org>
|
|
Several patches are now merged upstream and no longer needed
in lbmk, such as the HP EliteBook 8560w patch, and related
patches. Some patches were changed, for example the Dell Latitude
ivb/snb laptops are now variants in coreboot, instead of being
individual ports; now they re-use the same base code.
This this, the corresponding files under config/submodules
have changed, for things like 3rdparty submodules e.g. libgfxinit,
and tarballs e.g. crossgcc.
This is long overdue, and will enable more boards to be added.
This newer revision will be used in the next release, and some
follow-up patches will merge these trees into default:
* coreboot/haswell
* coreboot/dell
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Never, ever build images where GRUB is the primary payload.
These options have been removed from target.cfg handling:
* seabios_withgrub
* grub_withseabios
The "payload_grub" variable now does the same thing as
the old "seabios_withgrub" variable, if set.
The "grubonly" configuration is retained, and enabled by
default when SeaGRUB is enabled (non-grubonly also available).
Due to lbmk issue #216, it is no longer Libreboot policy to
make GRUB the primary payload on any board. GRUB's sheer size
and complexity, plus the large number of memory corruption issues
similar to it that *have* been fixed over the years, tells me
that GRUB is a liability when it is the primary payload.
SeaBIOS is a much safer payload to run as primary, on x86, due
to its smaller size and much more conservative development; it
is simply far less likely to break.
If GRUB breaks in the future, the user's machine is not
bricked. This is because SeaBIOS is the default payload.
Since I no longer wish to ever provide GRUB as a primary
payload, supporting it in lbmk adds needless bloat that
will later probably break anyway due to lack of testing,
so let's just assume SeaGRUB in all cases where the user
wants to use a GRUB payload.
You can mitigate potential security issues with SeaBIOS
by disabling option ROM execution, which can be done at
runtime by inserting integers into CBFS. The SeaBIOS
documentation says how to do this.
Libreboot's GRUB hardening guide still says how to add
a bootorder file in CBFS, making SeaBIOS only load GRUB
from CBFS, and nothing else. This, combined with the
disablement of option ROM execution (if using Intel
graphics), pretty much provides the same security benefits
as GRUB-as-primary, for example when setting a GRUB password
and GPG checks, with encrypted /boot as in the hardening guide.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
A subsequest revision will set them again as needed,
per coreboot target.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
See:
https://codeberg.org/libreboot/lbmk/issues/216
Almost all users will be OK running GRUB, but a
minority of users have experienced a fatal error
pertaining to grub_free() or grub_realloc() (as
my investigation of GRUB sources reveal when grepping
the error reported in the link above).
We don't yet know what the bug is, only that the
error occurs, leading to an effective brick if the
user has GRUB as their primary payload.
So far, it has only been reported on some Intel
SandyBridge-based Dell Latitudes in Libreboot, but
we can't be too sure.
The user reported that memtest86+ passes just fine,
and SeaBIOS works; BIOS GRUB also works, which means
that the bug is likely only in an area of GRUB that
runs specifically on the coreboot payload, so it's
probably a driver in GRUB when running on the metal
rather than BIOS/UEFI.
The build system supports a configuration whereby
SeaBIOS is the primary payload, but GRUB is available
in the SeaBIOS boot select menu, and an additional
configuration is available where GRUB is what SeaBIOS
executes first (while still providing boot select);
both of these are now the *only* configurations
available, on all x86 targets except QEMU.
The QEMU target is fine because if the bug occurs there,
you can just close QEMU and try a different image.
Even after this bug is later identified and fixed,
the GRUB source code is vastly over-engineered and there
are likely many more such bugs. SeaBIOS is a reliable
payload; the code is small and robust. Remember always:
Code
equals
bugs
Therefore, this configuration change is likely going
to be permanent. This will apply in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the release variable is all we need, turning a target on
or off for a given release.
the status checks were prone to bugs, and unnecessary; it
also broke certain benchmark scripts.
it's better to keep the lbmk logic simpler. board status
will be moved to the documentation instead.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
working s3 means i'm happy to mark it as being stable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it should be marked unstable, though these machines
are basically reliable; they have certain missing features
and quirky behaviour so it's important not to over-sell it
mark it as unstable, on all of the dell latitudes
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some latitudes still used the old style for variables
in target.cfg, specifically arch="x86_64" - lbmk used to
then check that on a big if/else and translate it to the
correct target name for crossgcc, e.g. i386-elf, arm-eabi
now it just puts the arch directly, in a new variable:
xarch
change arch="x86_64" to xarch="i386-elf" in these files.
also remove a few obsolete variables. should build now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also warn about issues, in a warn.txt file for each.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
export LBMK_VERSION_TYPE=x
x can be: stable, unstable
in target.cfg files, specify:
status=x
x can be: stable, unstable, broken, untested
if unset, lbmk defaults to "unknown"
if LBMK_VERSION_TYPE is set, no confirmation is asked
if the given target matches what's set (but what's set
in that environmental variable can only be stable or
unstable)
if LBMK_RELEASE="y", no confirmation is asked, unless
the target is something other than stable/unstable
"unstable" means it works, but has a few non-breaking
bugs, e.g. broken s3 on dell e6400
whereas, if raminit regularly fails or it is so absolutely
unreliable as to be unusable, then the board should be
declared "broken"
untested means: it has not been tested
With this change, it should now be easier to track whether
a given board is tested, in preparation for releases. When
working on trees/boards, status can be set for targets.
Also: in the board directory, you can add a "warn.txt" file
which will display a message. For example, if a board has a
particular quirk to watch out for, write that there. The message
will be printed during the build process, to stdout.
If status is anything *other* than stable, or it is unstable
but LBMK_VERSION_TYPE is not set to "unstable", and not building
a release, a confirmation is passed.
If the board is not specified as stable or unstable, during
a release build, the build is skipped and the ROM is not
provided in that release; this is in *addition* to
release="n" or release="y" that can be set in target.cfg,
which will skip the release build for that target if "n"
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Tested by Minimum_Baseball_629 on Reddit
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
this was done automatically by running:
./update trees -u coreboot
this has to be done when adding patches for now board ports,
because of the way lbmk and also coreboot's build systems work.
the configs just have to be re-generated to include a line
that says the entry for the newly added boards isn't set. look
at the diff of this commit as an example.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Tested by Martin Dawson.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Tested by Martin Dawson.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Tested by Martin Dawson.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
