| Age | Commit message (Collapse) | Author |
|---|
|
Specifically, use the same revision that Mate used in patchset 15.
This will ensure that any issues are *not* caused by the coreboot
revision; this is being done, because the old coreboot revision was
from July, but patchset 15 from Mate is based on a September revision
of coreboot.
I've been eliminating as many variables as possible, trying to fix
SeaBIOS payload on this machine, because it hangs in Libreboot, but
not when building from gerrit directly, which means the coreboot
revision may be a factor (since I'm using his patches on an older
revision so upstream might have made some changes since then that
the port relies on).
For this, a new coreboot tree is used, called "dell7", referring to
the fact that Kabylake is Intel's 7th generation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Add patches to convert the E6400 port into a GM45 Latitude variant and
add the E4300 as another variant, and create a config for the E4300.
Tested on my E6400 and E4300.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Dell OptiPlex 3050 Micro
I ran ./mk -u coreboot, to update existing configs
after merging. Actualy IFD and coreboot configs will
be done in the next revision. I've already added logic
for handling deguard, in preparation for this.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
set a default one in mkhelper.cfg
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Never, ever build images where GRUB is the primary payload.
These options have been removed from target.cfg handling:
* seabios_withgrub
* grub_withseabios
The "payload_grub" variable now does the same thing as
the old "seabios_withgrub" variable, if set.
The "grubonly" configuration is retained, and enabled by
default when SeaGRUB is enabled (non-grubonly also available).
Due to lbmk issue #216, it is no longer Libreboot policy to
make GRUB the primary payload on any board. GRUB's sheer size
and complexity, plus the large number of memory corruption issues
similar to it that *have* been fixed over the years, tells me
that GRUB is a liability when it is the primary payload.
SeaBIOS is a much safer payload to run as primary, on x86, due
to its smaller size and much more conservative development; it
is simply far less likely to break.
If GRUB breaks in the future, the user's machine is not
bricked. This is because SeaBIOS is the default payload.
Since I no longer wish to ever provide GRUB as a primary
payload, supporting it in lbmk adds needless bloat that
will later probably break anyway due to lack of testing,
so let's just assume SeaGRUB in all cases where the user
wants to use a GRUB payload.
You can mitigate potential security issues with SeaBIOS
by disabling option ROM execution, which can be done at
runtime by inserting integers into CBFS. The SeaBIOS
documentation says how to do this.
Libreboot's GRUB hardening guide still says how to add
a bootorder file in CBFS, making SeaBIOS only load GRUB
from CBFS, and nothing else. This, combined with the
disablement of option ROM execution (if using Intel
graphics), pretty much provides the same security benefits
as GRUB-as-primary, for example when setting a GRUB password
and GPG checks, with encrypted /boot as in the hardening guide.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.
The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216
The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.
The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.
So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:
grubtree="xhci"
In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.
Several other design changes had to be made because of this:
* grub.cfg in memdisk no longer automatically jumps to one
in CBFS, but now shows a menuentry for it if available
* Certain commands in script/trees are disabled for GRUB,
such as *config make commands.
* gnulib is now defined in config/submodule/grub/, instead
of config/git/grub - and this mitigates an existing bug
where downloading gnulib first would make grub no longer
possible to download in lbmk.
The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.
The GRUB payload has been re-enabled on HP EliteBook 820 G2.
This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.
Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Command: ./vendor download kcma-d8-rdimm_16mb
Output was:
include/lib.sh: line 115: kcma-d8-rdimm=config/vendor: No such file or directory
That will have to be audited later on, but the recent
more stringent error checking in vendor.sh triggered
this previously untriggered error message. The error
was in fact already occuring before, silently.
Anyway, mitigate by renaming all coreboot targets so
that they do not contain hyphens in the name. This
should avoid triggering errors in that eval command,
on line 115 in lib.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
