summaryrefslogtreecommitdiff
path: root/config/coreboot/dell9020mt_12mb
AgeCommit message (Collapse)Author
2024-04-269020 sff/mt: actually enable the TPM (by default)Leah Rowe
i added mkukri's patch but didn't enable it. this was intentional. this patch enables tpm by default, on all 9020 sff/mt targets. most users probably won't need it, but enabling it won't hurt. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-259020 sff/mt: add tpm enable patch from mate kukriLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-24haswell: only provide NRI-based ROMs in releasesLeah Rowe
release="n" is set in target.cfg on haswell build targets that use mrc.bin script/update/release exports LBMK_RELEASE="y" script/build/roms skips building a given target if release="n" in target.cfg *and* LBMK_RELEASE="y" you could also do the export yourself before running ./build roms, for example: export LBMK_RELEASE="y" ./build roms all This would skip these ROM images. The native haswell raminit is now stable enough in my testing, that I wish to delete the MRC-based targets. This is in line with Libreboot's Binary Blob Reduction Policy, which states: if a blob can be avoided, it should be avoided. The problem is that users often run the inject script in *lbmk* from Git, instead of from the src release archive. I forsee some users running this on modern lbmk with older release images. If the mrc-based target isn't there, the user may use an NRI-based target name, and think it works; they will insert without MRC. I foresaw this ages ago, which is why Caleb and I ensured that the script checks hashes, and hashes are included in releases. Therefore: for the time being, keep the MRC-based configs in lbmk but do not include images for them in releases. This can be done indefinitely, but I'll probably remove those configs entirely at some point. On the following boards, Libreboot now will *only* provide NRI-based ROM images for the following machines: * Dell OptiPlex 9020 SFF * Dell OptiPlex 9020 MT * Lenovo ThinkPad T440p * Lenovo ThinkPad W541/W540 I now recommend exclusive use of NRI-based images, on Haswell hardware. It's stable enough in my testing, and now supports S3. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-04config: Add Dell Latitude E5420Nicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-02-23disable hiding peg from mrc on dell 9020Leah Rowe
makes graphics cards work Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-08config: Add Dell Latitude E5520Nicholas Chin
Tested by Minimum_Baseball_629 on Reddit Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-02-08coreboot/dell9020mt: disable pcie rebarLeah Rowe
i enabled it but it's buggy according to comments on gerrit. disable for now. dgpu didn't work anyway, even with it turned off, when i had this tested. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-07update coreboot configsLeah Rowe
this was done automatically by running: ./update trees -u coreboot this has to be done when adding patches for now board ports, because of the way lbmk and also coreboot's build systems work. the configs just have to be re-generated to include a line that says the entry for the newly added boards isn't set. look at the diff of this commit as an example. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-04NEW BOARD: Dell OptiPlex 9020 MT (and 7020 MT)Leah Rowe
Specifically the MT versions. The SFF versions will be added separately, in a later commit. See: https://review.coreboot.org/c/coreboot/+/55232 This patch has been added, from patchset 31. It still has some unresolved issues, on that patchset, but it should boot. See commit message there. Of note: I've enabled PCI REBAR, though it's unknown whether it will work (some comments there about it though, on that gerrit page). I've also set CBFS size to 8MB, not the full size of the BIOS region; this is required on the T440p which uses the same mrc.bin file, to get S3 working. TSEG stage cache disabled, as on other Haswell boards. The setup: SeaBIOS-only as first payload, but with GRUB enabled as secondary payload. The _grubonly setup has been enabled here. This way, the config will work on iGPU and dGPU setups without issue. Signed-off-by: Leah Rowe <info@minifree.org>