summaryrefslogtreecommitdiff
path: root/blobs
AgeCommit message (Collapse)Author
2023-09-03add ich9m ifd/gbe filesLeah Rowe
a follow-up patch will make use of these, rather than ich9gen, and ich9gen will be deleted. these files were in fact generated *by* ich9gen. coreboot has ifdtool and bincfg, the latter of which can generate both ifd and gbe files for ich9m. that, and nvmutil which is part of libreboot, can change gbe mac addresses. i was going to replace ich9gen with a script that would run bincfg, ifdtool and nvmutil, to greatly reduce code size, because ich9gen is about 3k sloc. however, in practise we would always generate the same ifd config, and basically only change the mac address if that's what the user wants; nvmutil can already do that just fine. so, just include the binaries directly. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03Add Dell Latitude E6430Nicholas Chin
This was only tested on the iGPU model, though a dGPU model does exist. The vendor firmware used a 16KiB gbe.bin, which was modified with a random MAC address as well as shrinking it to 8KiB. As with the E6400, GRUB doesn't like the way the EC implements the keyboard controller and thus GRUB payloads are disabled at this time. Suspend does not currently work, and this is believed to be due to the EC controlling the DRAM reset gate which is required to prevent DRAM from being reset on resume. With some tweaks, the e6400-flash-unlock utility also works on this system, though both flash chips can be accessed through removal of only the keyboard. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-08-14NEW BOARD: Dell Precision T1650Leah Rowe
Very nice ivybridge board that supports ECC RAM. NOTE: I couldn't get onboard graphics working yet, but this was confirmed working with a graphics card (in my case nvidia quadra k420) booted in text mode on the SeaBIOS payload. The GRUB payload also works, when loaded from SeaBIOS. Therefore, this is a SeaBIOS-only board (as far as first payload is concerned), but you can pick GRUB from the menu. You could make it "GRUB-only" in practise by setting SeaBIOS boot order to only load GRUB, and disable the SeaBIOS menu. We refer to this as "SeaGRUB". I've made lbmk use biosutilities and uefiextract, to get at the SMSC SCH5545 Environmental Control (EC) firmware. This firmware is needed for fan control. This is automatically downloaded and extracted, from Dell UEFI firmware updates. As with other blobs such as Intel ME, this firmware is then scrubbed by the release build scripts. The blobutil "inject" script can be used to re-insert it. Of note: there is no fixed offset, but no other blobs to be inserted in CBFS either, so the offset when re-inserting on release ROMs should still be the same, and thus the ROM checksums should match, when running blobutil inject. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-25Revert "Revert "Add 4MB version of HP 8200 SFF""Leah Rowe
This reverts commit 2099545078d5a5586743d32b2470a296b66cb5c7. Wasn't this config's fault, the problem happens elsewhere too. I'm going to revert build/boot/roms to an older version and backport a few recent changes, to see if that fixes the problem. If it does, then I know that the recent linker issues happen due to recent changes in build/boot/roms The linker errors typically appear in util/kconfig/ but can happen elsewhere, seemingly random, which means I'm not handling distclean properly. Something isn't getting cleaned properly. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-25Revert "Add 4MB version of HP 8200 SFF"Leah Rowe
This reverts commit 0f7a5386b9219111418a8de8637039c8533d99ea. Random linker errors, must investigate after release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-20update release filesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-17Add HP 8300 USDTRiku Viitanen
Still on Gerrit. ME downloader failed with HP update file, so let's just use Lenovo's instead. Both contain identical ME8_5M_Production.bin files. Tested and working: * Native raminit with both DIMMs * Libgfxinit textmode and framebuffer on both DisplayPorts and VGA * External USB2 and USB3 ports: they all work * USB 3.0 SuperSpeed (rear, 4 ports) * Ethernet * Mini-PCIe WLAN * SATA: 2.5" SSD and optical drive bay * SeaBIOS and GRUB (boot to linux) * PS/2 keyboard and mouse * S3 suspend and resume, wake using USB keyboard * Headphone output, line out, internal speaker * Wake on LAN * Rebooting * CMOS options & nvramcui Untested: * Line in, mic input * MXM graphics card * EHCI debug Not working: * Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so maybe it just isn't present * PS/2 keyboard wake from S3 * mSATA (I have no mSATA drives)
2023-05-28Add 4MB version of HP 8200 SFFRiku Viitanen
This is useful for internally flashing Libreboot from OEM BIOS since the top ~3MB is write-protected by vendor firmware.
2023-04-22Add HP EliteBook Folio 9470mRiku Viitanen
2023-04-21Add HP EliteBook 2560pRiku Viitanen
2023-04-14Port to HP Compaq 8200 Elite SFFRiku Viitanen
2022-11-18fix part 1 checksum in t440p gbe.binLeah Rowe
i used "copy 0" in nvmutil to do this the error people saw in nvmutil was benign. i'm literally doing this just to prevent more errant user reports.
2022-11-14pragmatic system distribution guideline compliancepsdgLeah Rowe
osboot is now part of libreboot, and will soon shut down. libreboot now conforms to osboot policy.