| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Previously, this script only checked for "Makefile",
but "makefile" is another valid name; additionally, if
GNU Make is used, "GNUmakefile" is an accepted default.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
There is no reason to err if no Makefile exists.
Just exit with zero status. This makes the following
command work:
./handle make file -c util/*
Within util/, there is me7 update parser which does
not have a makefile (it's a python script).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The previous patch to the file was correct, except for
off by one at the end, resulting in no argument being
passed for project names.
Now the extra commands are run *before* handle_dependencies,
instead of running at the end of main. This prevents error.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The pager causes trouble in some cases, where the user has
to press enter at boot time depending on the configuration.
Interactive use is one thing, but we should leave this
disabled for smoother experience. If the user *wishes* to
use the shell, they can always just enable the pager
themselves by doing:
set pager=1
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
At the end of the function, this script will now
run itself again if there are more arguments. This
enables the following:
./handle make file -c project1 project2 project3
Whereas previously, it could only do this:
./handle make file -c project1
Substitude -b and it's the same.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
general code cleanup, but a few exit commands were also
wrong. for example, relying on listitems to always return
zero status and then calling lbmk_exit 1
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some x_ calls are made that aren't needed. this is now
corrected. additionally, some x_ calls were being made
that are quite error-prone, like ones that use $PWD.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
reduced sloccount, without reducing functionality
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
good lord, redundancy is indeed redundant.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the one at the end of main is unnecessary, because
it's handled inside the for loop.
this file isn't used anywhere else, so it's OK.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as it turns out, i delete "seen" inside the for loop,
which is a more thorough way to do it.
thus, the first rm command is unnecessary.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it must be done *after* setting cfgsdir
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the file check is sufficient (target.cfg)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
slight sloccount reduction. light renaming of
functions between the two scripts, placing more
logic in main() under include/boot.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
errors are not defined for mktemp, and the /tmp file
system should be assumed reliable.
if /tmp is *unreliable*, then this is not something that
lbmk either can or should fix; the user clearly has
bigger problems.
manpages for mktemp do not define errors. it is assumed
to be completely reliable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Instead of having detailed error messages, run most
commands through a function that calls err() under
fault conditions.
Where detail is still required, err() is still called
manually. Where it isn't, the error message is simply
whatever command was executed to cause the error.
This results in a massive sloccount reduction for lbmk;
specifically, 178 sloc reduction, or a 8.1% reduction.
The total sloccount is now 2022, for shell scripts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
handle everything in the getopts loop
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also: further reduce the number of arguments passed,
to certain functions as and when feasible, in cases
where those are global variables that never change.
the cbfstool argument in mkUbootRom wasn't even used.
that function was only using the global variable, which
again is only set once.
i also shortened a few messages, removed a few errant
line breaks and reduced sloccount by exactly 1 in main()
by re-arranging how the shift command is used.
it's mainly about shortening variable names, to then
reduce the number of line breaks, but it's a surgical
code size reduction in build/boot/roms.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
These are only ever initialised globally, and set once.
Other instances where they are set are only in cases
where they are passed as argument, at the start of
a function, so they are being *needlessly* re-set.
Set them only once and use them globally.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
-k, -p and -d let you set keymap, payload and displaymode
respectively, but the handling for this is buggy when
passing multiple arguments.
Support only one argument, for simplicity. This is how
people use them anyway, and it makes lbmk less buggy.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The *same* main() function is now used on both scripts.
However, merging both scripts together would be less efficient
on sloccount, and would be error-prone. The purpose of having
roms_helper is that the variables get re-initialised the same
way each time, for each board, automatically.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
If one of them doesn't exist, error out.
Previously, a build would start but then it would
error out later on. This implements the mentality:
fail early, fail hard
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Only one for loop is required.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. -k ukqwerty
previously, this would not work:
./build boot roms -k ukqwerty all
only this would work:
./build boot roms all
this patch fixes the bug.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
update/blobs/download and update/project/repo both use
the same logic, for setting variables with awk and a
specially formatted configuration file.
unify this logic under include/option.sh, and use that.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
mkdirs() should be in include/blobutil.sh, as should
extract_archive(), because that is primarily where
they are used.
script/update/blobs/download calls these functions
aswell, but it sources include/blobutil.sh so it's OK.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Don't use only wget. Some systems may only have curl.
The user can always install wget anyway, but why not
support both? I've added the right user agent string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
