summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-16lbmk: fail if ./build command options failsLeah Rowe
non-zero exit, whereas it was previously an unhandled non-zero exit as per -e - now it is simply more verbose. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-16lbmk: simplify execute_command()Leah Rowe
if ./build command options fails, it just means that lbmk would next check whether ./buildpath mode list exists, which it never will because that would violate lbmk design. the generic "help" output is more than sufficient, and tells the user to check "list" anyway, so there's no point in saying it here. simplify this function. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-16lbmk: remove "./buildpath mode all"Leah Rowe
for example: ./build boot all the "all" function is a relic from a much older lbmk design, where for example we might have done: ./build clean all ./download all this is no longer used, nor is this currently relevant for the types of scripts present in lbmk. we can always re-add this function later if needed, but for now? remove unwanted code. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-16lbmk: break up main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-16lbmk: always use lbmk_exit for exitsLeah Rowe
there were certain edge cases where TMPDIR wasn't being cleaned. this patch will fix that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12rel/src: fix multi-line commandLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12remove ich9utils entries from .gitignoreLeah Rowe
they are not needed anymore Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12Merge pull request 'make clean stm32-vserprog for release' (#130) from ↵Leah Rowe
Riku_V/lbmk:makeclean into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/130
2023-09-12serprog: list available boardsRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11fix typo serprog -> vserprogRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11make libopencm3 correctlyRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11make clean libopencm3Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11Download libopencm3 before buildingRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11coreboot/hp8200sff_4mb: fix bad ifd path in configLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-11download and copy serprog related srcRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11clean up pico-serprog for releaseRiku Viitanen
moved cmake files into a separate build directory. this can just be deleted for the source release. might as well use cmake for the actual build too. that makes repeated builds faster for some reason. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-10make clean stm32-vserprog for releaseRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-10make lbmk help text actually vaguely helpfulLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: be more thorough deleting .gitLeah Rowe
a few were missed. nuke all of it from orbit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: delete elf/ in srcdirLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10handle/make/file: run make-clean firstLeah Rowe
flashrom distclean resulted in zero status upon exit, but did not remove the actual flashrom binary. our logic was to run distclean and defer to clean; now, we run clean and *then* run distclean, but we do not throw an error if distclean fails. (we do throw one if clean fails) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove cbutils/ in srcdirLeah Rowe
the builds were being created within that srcdir, because build/release/src runs lbmk commands within it, and one of them is building (re-building) it. there's no point addressing this, other than rm -Rf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove errant codeLeah Rowe
the main lbmk script already creates these files, and these files are then copied by build/release/src so we don't need to re-create them here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10handle/make/config: distclean once per treeLeah Rowe
previously, it was possible that the distclean or crossgcc-clean modes were being executed on the same project tree, needlessly. this patch fixes that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10handle/make/config: fix distclean/crossgcc-cleanLeah Rowe
these commands weren't being run at all, leading to binaries (such as xgcc) not being removed, and thus they were present in tested release archives. this bug did not affect libreboot 20230625. it appeared during my audit, post-20230625. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10handle/make/config: fix whitespace and 80-line bugLeah Rowe
fit in 80 lines, and remove whitespace Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/roms: use -T0 on serprog tarballsLeah Rowe
xz supports using multiple threads so use multiple threads Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/boot/roms stragglers: properly handle errorsLeah Rowe
there were a few missing err calls i actually went through all of lbmk and found no instances where err calls were missing except in build/boot/roms_helper Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: re-create symlinks, don't copyLeah Rowe
if you copy a symlink, you create a whole new file with the contents of what that symlink points to. what we need to do instead is re-create the symlinks. this is relevant for all symlinks to the main lbmk script, from the main directory of lbmk.git. this avoids there being multiple copies of the main lbmk script, in release archives. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09coreboot/qemu_x86_12mb: re-add this mainboardLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: use printf, not echo, where appropriateLeah Rowe
printf has more universal behaviour, across various implementations of sh, so it's better to use this. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09update/blobs printf statements: use double quotesLeah Rowe
single quotes are not valid Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: better handling of printf: stdout/stderrLeah Rowe
in some cases, messages that should be considered errors or warnings, were being written to the standard output, rather than written as error messages. also: one or two printf statements should specifically avoid printing errors (to any file); in these cases, stdout has been redirected to /dev/null Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09checkgit: properly print output to stderrLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09update/project/*: remove redundant checksLeah Rowe
these scripts used to be in the main directory of lbmk, and thus needed to check for root user, and also git credentials. now they are called by the main lbmk script, which also runs the same checks. avoid waste of resources by not running the same check twice. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09blobs/download: don't use the -B option in makeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/release/roms: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09blobs/inject: add error condition on rm commandLeah Rowe
this was overlooked, earlier on in lbmk audit 2 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09blobs/inject: fix checksum validation if no-ucodeLeah Rowe
on e6400_4mb, the release build scripts remove nvidia's vga rom which is used on dgpu models. however, microcode is also removed in separately copied rom images the inject script was inserting vgaroms directly into these no-microcode roms, but the microcode blob is bigger than the vga rom, and cbfstool inserts into the first available free spot within cbfs, so it was inserting into the spot where cpu microcode went. this caused the rom checksum to not match what was generated during build/release/roms being executed the only real fix is to guarantee offsets within cbfs for all files, by recording what offsets were used and then calculating that during insertion so this patch is a workaround, but fixes the issue. the workaround is: don't insert blobs directly on no-microcode roms, instead insert only on microcode-based roms, then re-copy those roms and remove microcode in aptly named copies it's a bit more convoluted, but works perfectly fine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09blobs/sources: fix backup links on some filesLeah Rowe
some files did not have backup links defined (the ones defined were the same as main links) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09use sha512sum to check downloads, not sha1sumLeah Rowe
sha-1 has known collision issues, which may not be readily exploitable yet (in our context), but we should ideally use a more secure method for checking file integrity. therefore, use sha-2 (sha512sum) for checking files. this is slower than sha-1, but checksum verification is only a minor part of what lbmk does, so the overall effect on build times is quite negligible. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09Merge pull request 'Add stm32-vserprog' (#129) from Riku_V/lbmk:stm32 into ↵Leah Rowe
master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/129
2023-09-09Add stm32-vserprogRiku Viitanen
Tested on a Nucleo-F042K6. That has an onboard stlink: `st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex` The usb port used for flashing is separate, its is exposed on the pin header instead. Check boards/nucleo-f042k6.h for usb pinout. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-09build/boot/rom: only insert scan.cfg if neededLeah Rowe
where it is set to "both" (grub_scan_disk), inserting scan.cfg is superfluous, because grub.cfg defaults to both anyway, unless otherwise specified by scan.cfg, and only if that file exists within cbfs. thus, save a bit of build time (only a slight saving) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/boot/roms: delete tmpcfg when doneLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09set grub.cfg timeout to 5s (10 on some boards)Leah Rowe
target.cfg can now specify e.g. grub_timeout=20 this would then be inserted as timeout.cfg in cbfs, containing the instruction: set timeout=20 HP laptops need a bit of extra time, due to the delay caused by the EC bug workaround deployed in GRUB desktops in general need extra time. this too is set to 10s, like the HP laptops. only insert timeout.cfg if actually needed (declared in target.cfg), otherwise grub.cfg will default to 5s Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-08Merge pull request 'pico-serprog improvements' (#128) from ↵Leah Rowe
Riku_V/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/128
2023-09-08Build pico-serprog binary release archiveRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Build for all pico board, not just the "original"Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Support multiple dependencies per projectRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-03 03:18:28 +0000