summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-05bugfix: move dependencies handling to lib.shLeah Rowe
do it strategically, in just the right place so that the version and versiondate files aren't written. otherwise, version/versiondate are written as root and the build system becomes unusable after that, unless you reset the file ownerships from root. hardly user-friendly. mitigate this bug. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision againLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04bump untitled revision in git configLeah Rowe
it imports the same environmental variable fix because i had the same buggy TMPDIR check there. i fixed that upstream in untitled. import the new untitled revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04lib.sh bugfix: check environmental variables rightLeah Rowe
A user had TMUX_TMPDIR set, which broke the TMPDIR check Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03lib.sh: more friendly output from e()Leah Rowe
already of saying "found", say "already exists" this means the output of these commands more user friendly and intuitive: ./update trees -b grub default ./update trees -b coreboot i945 this is just an example. when an ELF file already exists, the build is skipped even if src isn't downloaded. this design is intentional, because it means that you can use previous builds if you want to save time on another. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03badcmd: don't print "no context given"Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03badcmd: link directly to the maintenance manualLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03better help text on invalid commandsLeah Rowe
adding help again is a bad idea. code should never document itself; that's what documentation is for. so, make the code do a better job telling the user where to find documentation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02build: print the project website address on helpLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02add projectsite file: point to libreboot.orgLeah Rowe
this will be used in subsequent revisions Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02make GRUB multi-tree and re-add xhci patchesLeah Rowe
Re-add xHCI only on haswell and broadwell machines, where they are needed. Otherwise, keep the same GRUB code. The xHCI patches were removed because they caused issues on Sandybridge-based Dell Latitude laptops. See: https://codeberg.org/libreboot/lbmk/issues/216 The issue was not reported elsewhere, including on the Haswell/Broadwell hardware where they are needed, but the build system could only build one version of GRUB. The older machines do not need xHCI patches, because they either do not have xHCI patches, or work (in GRUB) because they're in EHCI mode when running the payload. So, the problem is that we need the xHCI patches for GRUB on Haswell/Broadwell hardware, but the patches break Sandybridge hardware, and we only had the one build of GRUB. To mitigate this problem, the build system now supports building multiple revisions of GRUB, with different patches, and each given coreboot target can say which GRUB tree to use by setting this in target.cfg: grubtree="xhci" In the above example, the "xhci" tree would be used. Some generic GRUB config has been moved to config/data/grub/ and config/grub/ now looks like config/coreboot/ - also, the grub.cfg file (named "payload" in each tree) is copied to the GRUB source tree as ".config", then added to GRUB's memdisk in the same way, as grub.cfg. Several other design changes had to be made because of this: * grub.cfg in memdisk no longer automatically jumps to one in CBFS, but now shows a menuentry for it if available * Certain commands in script/trees are disabled for GRUB, such as *config make commands. * gnulib is now defined in config/submodule/grub/, instead of config/git/grub - and this mitigates an existing bug where downloading gnulib first would make grub no longer possible to download in lbmk. The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF, Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should work again in GRUB. The GRUB payload has been re-enabled on HP EliteBook 820 G2. This change will enable per-board GRUB optimisation in the future. For example, we hardcode what partitions and LVMs GRUB scans because * is slow on ICH7-based machines, due to GRUB's design. On other machines, * is reasonably fast, for automatically enumerating the list of devices for boot. Use of * (and other wildcards) could enable our GRUB payload to automatically boot more distros, with minimal fuss. This can be done at a later date, in subsequent revisions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01u-boot on qemu: remove currently unused x86 targetLeah Rowe
it doesn't build, at present, but isn't used by any coreboot targets, so the build issue does not come up during release builds, but i did find it laying around during my audits. x86 qemu is on todo for libreboot, on all x86 boards, but the current config is broken, so: remove it. it's very much a requirement that anything in lbmk should work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan /boot/grub.cfg lastLeah Rowe
very unlikely to exist. in fact, should i remove it? Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan grub2/ lastLeah Rowe
it's very unlikely that someone would use this directory name nowadays, and i had half a mind to remove it altogether Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: search a reduced list of devs/partitionsLeah Rowe
in practise, the machines we support don't have the option of including so many disks; 8 seems like the most reasonable default. additionally, it's unreasonable to expect *20 partitions* this hardcoding is done to avoid using *, which is slow in grub on some machines (the grub kernel always re-enumerates the devices during every operation, without caching any of it) yet, the hardcoding is also slow; balance it a bit better by searching fewer permutations, but not so few that it would likely break a lot of setups Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: scan grub.cfg from ESPLeah Rowe
we already supported syslinux but not grub support grub by scanning for the most common paths, based on the most popular distros we don't hardcode this with * because it slows down the boot, and in practise many distros still use the same grub.cfg location as in BIOS systems (the EFI one is often just a link to the BIOS one) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: split up try_user_configLeah Rowe
in the next revision, i will add ESP paths Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: don't search for *_grub.cfgLeah Rowe
this is a relic from the old days when we didn't automated the grub.cfg logic as much. these days, the grub.cfg logic is able to boot almost all distros without any manual intervention or override. removing these entries will speed up the boot in general Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: remove unnecessary path for isolinuxLeah Rowe
the path "/boot/EFI" is unnecessary because the ESP is always a FAT32 partition, so we don't need to scan it as a subdirectory within a subdirectory. the ESP is always mounted as its own partition, FAT32, and EFI/ is always at the root of it Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01grub.cfg: don't scan EFI on btrfs subvolsLeah Rowe
the esp is always a fat32 partition so this makes no sensgrub.cfg: don't scan EFI on btrfs subvols the esp is always a fat32 partition so this makes no sense Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01Merge pull request 'Fix building vboot on i686' (#218) from ↵Leah Rowe
lukeshu/lbmk:lukeshu/i686 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/218
2024-05-31vendor.sh: remove unnecessary assignmentLeah Rowe
dl_fail is set to n and then immediately to y afterward why? clearly i was dehydrated Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30Fix building vboot on i686Luke T. Shumaker
2024-05-30git.sh: do not remove .submodulesLeah Rowe
the reason for it is because sometimes the coreboot build system auto-downloads submodules which we don't want. however, we now pass UPDATED_SUBMODULES=1 in make, which disables this behaviour in coreboot's build system. therefore, remove this unnecessary logic. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30delete u-boot test/lib/strlcat.c using nuke()Leah Rowe
we don't need to do it in the release function Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30import nuke() from cbmk cdce8ba70bLeah Rowe
cbmk revision: cdce8ba70b863ea3fe0ad7a4d7b27d0c5ca30421 as of date 30 May 2024 Canoeboot provides deblobbing, fully, on all sources, so as to provide a GNU FSDG compliant coreboot distro. Libreboot used to do this but now uses a more pragmatic Binary Blob Reduction Policy, allowing better hardware support in general. See: https://libreboot.org/news/policy.html Well! We sometimes still need to delete files in Libreboot, but for other reasons. For example, the poorly licensed strlcat.c file that we delete from U-Boot, in both projects. I currently hardcode such deletions in lbmk. After this revision, I will start using "nuke.list" files as in cbmk. Simply patching the sources to exclude such files, in this context, is not OK because then we are still including them but as diffs. This is why the nuke() function exists. Import Canoeboot's nuke technology. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29coreboot t440p/w541: enable nvme in grub_scan_diskLeah Rowe
these laptops do not officially have nvme slots on them, but there is an ngff wifi slot which is PCI-E x1, and you can use a special adapter on it to run nvme ssds. total throughput is retarded by the x1 PCI-E configuration, but it's still faster than a sata ssd (nvmes are x4 PCI-E). support it in grub_scan_disk on the off chance that some users may make use of this. it should work just fine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: skip if blob path is /dev/nullLeah Rowe
We use a path of /dev/null pointing to a ROM for Fam15h AMD boards, to add fake PIKE2008 images. This is to mitigate a hang in SeaBIOS, but now with recent changes, this causes the command below to download coreboot, when it should just exit saying no vendor files needed. Prevent accidentally wasted bandwidth. The command was: ./vendor download kcma_d8_rdimm_16mb This now correctly does the following: $ ./vendor download kcma_d8_rdimm_16mb Vendor files not needed for: kcma_d8_rdimm_16mb The joys of programming a build system in sh! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29do not allow dashes in coreboot target namesLeah Rowe
Command: ./vendor download kcma-d8-rdimm_16mb Output was: include/lib.sh: line 115: kcma-d8-rdimm=config/vendor: No such file or directory That will have to be audited later on, but the recent more stringent error checking in vendor.sh triggered this previously untriggered error message. The error was in fact already occuring before, silently. Anyway, mitigate by renaming all coreboot targets so that they do not contain hyphens in the name. This should avoid triggering errors in that eval command, on line 115 in lib.sh Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29./vendor download: more fine-tuned error controlLeah Rowe
By default, the build system does set -u -e Some errors are unavoidable and have to be handled, so we have to set +u +e (turn off error handling in sh), when downloading vendor files, but only certain parts of vendor.sh trigger errors (which cause an exit). Replace the current bazooka approach with a more fine grained approach, turning error handling back on again when it is safe to do so. In the parts of the code where it is disabled, the code is written very, very carefully, with errors still handled manually, but more careful auditing is required. This change has been tested and makes the command much safer to run. In security (or any bug auditing), it is the principle of least privilege that holds true. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29vendor.sh: don't error on main targetsLeah Rowe
e.g. coreboot/default contains no config directory, so the old logic would be trying to do: . which is obviously invalid now for example: $ ./vendor download default Vendor files not needed for: default and it will exit with zero status the only thing that should ever return non-zero status is when you define a target that does not exist, config or no. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28roms: allow user override of grub_scan_diskLeah Rowe
this effectively lets you change the boot order. example: ./build roms -s "nvme ata" t1650_12mb the above example would set: grub_scan_disk="nvme ata" another example: ./build roms -s nvme t1650_12mb this would set: grub_scan_disk="nvme" this overrides what's set in target.cfg for the given target. useful for quick reconfiguration if building from source Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28grub.cfg: actually support setting boot orderLeah Rowe
replace variables ahcidev/atadev/nvmedev with a single one named bootdev the for loop goes through grub_scan_disk, so now it is effectively a bootorder configuration Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28trees: use CPUS=x on regular coreboot makeLeah Rowe
i already do this on crossgcc, but overlooked it on regular builds where i just use -j, but coreboot's build system makes use of the CPUS= option in make use XBMK_THREADS for this Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28update gitignoreLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28roms: fix bad eval when comparing optionsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27grub.cfg: add spdx headerLeah Rowe
it has always been gpl 3 or later, but it helps to have the license declaration within the file there's a copying file anyway. put spdx in the config Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27re-configure grub_scan_disk on various targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27remove grub_scan_disk in all target.cfg filesLeah Rowe
A subsequest revision will set them again as needed, per coreboot target. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27grub.cfg: use grub_scan_disk to set boot orderLeah Rowe
Previously, grub_scan_disk could set ata, ahci or "both", which would make both be tried (ahci first). This worked when we only dealt with ata and ahci devices, but now we support nvme devices so the logic is inherently flawed. Instead, use grub_scan_disk to store the boot order, e.g.: grub_scan_disk="ahci nvme ata" grub_scan_disk="nvme ata" In the first example, it would make GRUB scan ahci first, then nvme and then ata. In the secontd example, it would make GRUB scan nvme first, and then ata. If "both" is set, or anything other than ahci/ata/nvme, grub_scan_disk is now changed to "nvme ahci ata". Actual grub_scan_disk entries in target.cfg files will now be modified, to match each machine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27GRUB: remove XHCI patches for now (will re-add)Leah Rowe
Fixes this bug: https://codeberg.org/libreboot/lbmk/issues/216 Well, fix is the wrong word. We want xHCI ideally. Mate is working on it as I write this. I've also: * Disabled CONFIG_FINALIZE_USB_ROUTE_XHCI on Haswell boards (coreboot) * Disabled the GRUB payload on HP 820 G2 for now We will need to re-add the xHCI patches once fixed. If Mate/we can't fix it, I'll contact Patrick Rudolph who originally wrote the xHCI patches. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27minor correctionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27roms: make grubfirst if seabios_withgrub=yLeah Rowe
rather than if seabios_grubonly=y if grubonly=y, still make the grubonly rom this complements the previous commit Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27coreboot: only run GRUB as a secondary payloadLeah Rowe
See: https://codeberg.org/libreboot/lbmk/issues/216 Almost all users will be OK running GRUB, but a minority of users have experienced a fatal error pertaining to grub_free() or grub_realloc() (as my investigation of GRUB sources reveal when grepping the error reported in the link above). We don't yet know what the bug is, only that the error occurs, leading to an effective brick if the user has GRUB as their primary payload. So far, it has only been reported on some Intel SandyBridge-based Dell Latitudes in Libreboot, but we can't be too sure. The user reported that memtest86+ passes just fine, and SeaBIOS works; BIOS GRUB also works, which means that the bug is likely only in an area of GRUB that runs specifically on the coreboot payload, so it's probably a driver in GRUB when running on the metal rather than BIOS/UEFI. The build system supports a configuration whereby SeaBIOS is the primary payload, but GRUB is available in the SeaBIOS boot select menu, and an additional configuration is available where GRUB is what SeaBIOS executes first (while still providing boot select); both of these are now the *only* configurations available, on all x86 targets except QEMU. The QEMU target is fine because if the bug occurs there, you can just close QEMU and try a different image. Even after this bug is later identified and fixed, the GRUB source code is vastly over-engineered and there are likely many more such bugs. SeaBIOS is a reliable payload; the code is small and robust. Remember always: Code equals bugs Therefore, this configuration change is likely going to be permanent. This will apply in the next release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26flashprog: bump to 5b4fdd1 from 2 May 2024Leah Rowe
I've rebased the workaround-mx patch as follows. See: commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4 Author: Nico Huber <nico.h@gmx.de> Date: Fri Jan 13 01:19:07 2023 +0100 Let the flash context directly point to the used master This change, now upstream in flashprog, made me have to do this in the patch. I changed this: flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf); to this: flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf); It should work fine. This update imports the following upstream patches from flashprog: * 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347 * 72c9e40 meson: Check for CPU families with known raw mem access * 3458220 platform/meson: Port pciutils/pci.h workaround to Meson * f279762 platform/meson: Check for libi386 on NetBSD * 14da5f7 README: Convert to Markdown * 8ddea57 README: Document branching and release policy * 2522456 util/list_yet_unsupported_chips.sh: Fix path * cbf9c11 spi: Don't cross 16MiB boundaries with long writes * 823a704 dediprog: Skip warning on first attempt to read device string * e8463c8 dediprog: Revise prefix check for given programmer id * 38af1a1 dediprog: Revise id matching * 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting * cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting * 7679b5c spi25: Replace spi_read_chunked() with more abstract version * ca1c7fd spi25: Normalize parameters of spi_nbyte_read() * e36e3dc dediprog: Use default_spi_write_256 * 522a86d linux_spi: Use default_spi_read()/_write_256() * 806509b cli_classic: Turn progress reporting into a progress bar * 842d678 libflashrom: Return progress state to the library user * aa714dd flashprog.c: Let select_erase_functions() return byte count * 2eed4cf serprog: Add SPI Mode and CS Mode commands * 821a085 dediprog: Implement id reading for SF600 and later * 274e655 dediprog: Read device string early * 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2 * fb176d2 dediprog: Use more general 4BA write mode for newer protocols * 0ab5c3d dediprog: Split device type and version parsing * bdef5c2 dediprog: Use unsigned conversions to parse device string * 5262e29 dediprog: Try to request 32B device string (instead of 16B) * e76e21f dediprog: Get rid of some unnecessary hex constants * 5a09d1e udelay: Lower the sleep vs delay threshold * 03ad4a4 linux_mtd: Provide no-op delay implementation * 211c6ec serprog: Refine flushing before synchronization * 383b7fe serprog: Test synchronicity before trying to synchronize * d7318ea serprog: Move synchronicity test into separate function * 9a11cbf Let the flash context directly point to the used master * aabb3e0 writeprotect: Hook wp functions into the chip driver * 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode` * 929d2e1 internal: Pass programmer context down into chipset enables * 7c717c3 internal: Pass programmer context down into board enables * e3a2688 Pass programmer context to programmer->init() * 2b66ad9 Start implementing struct flashprog_programmer * 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME * b197402 memory_bus: Split register mapping into own function * 0e76d99 memory_bus: Move (un)map_flash_region into par master * 9eec407 Perform default mapping only for respective chips * 56b53dd wbsio_spi: Request memory mapping locally * 5596190 it87spi: Request memory mapping locally * 46449b4 spi25: Drop stale `bus == SPI` guards * ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook * 901fb95 Add prepare/finish_access() hooks for chip drivers * a96aaa3 dediprog: Support long writes of 16MiB and more * 1338936 Consider 4BA support when filtering erase functions * 8d36db6 flashprog.8: Fix up serprog example * d2ac303 flashprog.8: document new serprog cs parameter * d1b9153 chipset_enable.c: Add Genoa to mendocino entry Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26rename include/option.sh to include/lib.shLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26roms: rename bstr variableLeah Rowe
i forgot to do this in the recent cleanup. it is now initialised as a variable named "x" Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26general code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25build: simplify git_init()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25build: do root check before git checkLeah Rowe
otherwise, git could be initialised as root. running as root is not allowed. Signed-off-by: Leah Rowe <leah@libreboot.org>