summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-15roms: don't use x_ to call build_grub_romsLeah Rowe
build_grub_roms never returns a non-zero value Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15trees: simplify copy_elf()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15trees: remove unnecessary check in copy_elfLeah Rowe
we don't need to check whether this variable is set, because checking an empty path will also cause the same return in the next line. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15grub: insert background in memdisk insteadLeah Rowe
the background is only a few kb. the whole rationale before was to limit the space used in memdisk, but this decision was made when the background was much bigger; it has since been optimised greatly, and the grub modules were heavily reduce, so it should be safe. grub's memdisk breaks when you add too much data to it. as part of simplifying the rest of lbmk, this change removes some more bloat from the rest of lbmk. handling this in the memdisk is much simpler than handling it with cbfstool. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: unify all add-payload commandsLeah Rowe
add a generic function that can insert payloads with lzma compression, or raw files without compression Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: don't add grub keymaps at allLeah Rowe
if not inserted, the default keymap is usqwerty. don't waste ssd write cycles copying so many images, or cpu time compressing so many. the user can simply add a keymap.gkb file to cbfs and it will work fine. this will be documented in the next release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: merge handle_coreboot_target into main()Leah Rowe
rely on return status per each of the three main rom functions, to then update the "targets" variable. use this as the basis to determine which targets were built, during final confirmation when the script exits. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify target check (whether roms built)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify main() againLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: remove redundant check on grub_scan_diskLeah Rowe
the current validation check is extremely over-engineered, because the user override is no longer available and we're always very careful in how we modify target.cfg per board. remove the redundant code. trust that target.cfg is correct. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: remove dangerous runtime p/s/d optionsLeah Rowe
p = payload s = grub_scan_disk d = displaymode setting the payload is no longer safe, due to issue 216 and similar issues that might pop up in the future; it's best left only to target.cfg, per board, so that we know what config is safe/tested. don't let the user override it. scandisk isn't safe to override because the given machine may not have the type of device that the user specifies displaymode is actually ok to set, because it simply whitelists what configs pre-existing to actually use, but it's bloat basically, the rule is this: don't make it easy for the user to brick their hardware. make it harder instead. a user wily enough to go modifying their payload will probably have read docs/maintain/ anyway and knows how to edit target.cfg if they want another board configuration. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14unified checks for variable initialisationLeah Rowe
new function chkvars() does the job Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14lib.sh: remove the items() functionLeah Rowe
it's pretty much just doing the same thing as ls -1 remove it! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12Libreboot 20240612 release20240612Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12coreboot nasm: use coreboot mirror as backupLeah Rowe
don't use the macports mirror, because it's not certain whether those tarballs will always be there. use the coreboot one as a backup instead, and nasm.us as main Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12haswell: add Mate's patch fixing IGD port listLeah Rowe
fixes DP++ and adds a DP that wasn't even there before, on all currently supported variants of these machines Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12haswell: add Nico's patch for IGD PCI IDsLeah Rowe
the patch fixes IGD on certain xeon processors Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12grub: only enable nvme if needed on a boardLeah Rowe
remove nvme support from the "default" grub tree now there are three trees: * default: no xhci or nvme patches * nvme: contains nvme support * xhci: contains xhci and nvme support this is in case a bug like lbmk issue #216 ever occurs again, as referenced before during lbmk audit 5 there is no indication that the nvme patch causes any issues, but after previous experience i want to be sure Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-11fix nasm download path for coreboot/fam15hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09minor code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09re-add ability to use cbfs grub.cfg as defaultLeah Rowe
i removed this before, when making grub multi-tree, because the design i used in an earlier version of the patch actually added the grub.elf generation to grub source itself, but then i decided to hack around the grub build system from lbmk/cbmk instead re-add this functionality, so that users can easily insert their own custom grub.cfg into cbfs without needing to re-build their image. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09trees: exit with error if project undefinedLeah Rowe
i was originally looser about this, because i also wanted the trees script to generically run "make" from any directory, but this behaviour was error-prone and it is no longer used in the build system. disable it, in the interest of stability. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09build: also make a lock file during release buildLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: more useful lock messageLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09create a lock file during buildsLeah Rowe
prevent duplicate main instances of the build system from running the lock file is deleted when the parent process exits, alongside the tmpdir deletion the build system must only ever be run ot one instance at a time, per work directory Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: hide e() output on for loopLeah Rowe
this for loop is a hack to make sure that all the sources get nuked (using nuke.list files). hide the messages so that they do not appear when running just any command in the trees script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: fix regressionLeah Rowe
i was being a bit too clever about some optimisations revert this change. otherwise, nothing will download or build Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: download xtree *before*, not afterLeah Rowe
downloading it after means that if an error occurs when downloading the xtree project, the main project will still be there and nothing will mandate the downloading of the xtree project. whereas, if we grab the xtree project first, then the main project won't get saved to src/ this makes the build system a bit more resilient under fault conditions, but otherwise doesn't change behaviour. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: fix deletion path in nuke()Leah Rowe
i accidentally forgot to include src/ in the prefix Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: less confusing error in download()Leah Rowe
don't say "file missing", because it may be present! instead, say that the download failed. this covers both contexts: internet failed and thus no file present, or the file is present but checksum verification failed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: hide stderr on download()Leah Rowe
on the initial check, the output is confusing because it will say "checksum verification failed" if the file doesn't already exist, but then goes to download. only say checksum failed if a download occured, and the check failed, otherwise report nothing except that the file already exists. this will not reduce the ability to debug issues later on, and it will reduce the amount of confusion for users. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: simplify download()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: fix redundancy in download()Leah Rowe
it was only downloading the main url, even when it should use the backup. fix it by actually using the for loop variable. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: simplify singletree()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: further simplify nuke()Leah Rowe
it's a very compact nuke Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: simplify link_crossgcc()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: simplify nuke()Leah Rowe
do not over-engineer such a trivial thing. seriously. all we're doing is nuking some files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09Merge pull request 'Add dependency scripts for Fedora 40 and Ubuntu 24.04' ↵Leah Rowe
(#220) from fuel-pcbox/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/220
2024-06-09add crossgcc tarballs to config/submodules/Leah Rowe
support redundant downloads, and enable inclusion of these tarballs inside release archives, for offline builds. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08git.sh: support downloading *files* as submodulesLeah Rowe
when we download coreboot, we currently don't have a way to download crossgcc tarballs, so we rely on coreboot to do it, which means running the coreboot build system to do it; which means we don't get them in release archives, unless we add very hacky logic (which did exist and was removed). the problem with coreboot's build system is that it does not define backup links for each given tarball, instead relying on gnu.org exclusively, which seems OK at first because the gnu.org links actually return an HTTP 302 response leading to a random mirror, HOWEVER: the gnu.org 302 redirect often fails, and the download fails, causing an error. a mitigation for this has been to patch the coreboot build system to download directly from a single mirror that is reliable (in our case mirrorservice.org). while this mitigation mostly works, it's not redundant; the kent mirror is occasionally down too, and again we still have the problem of not being able to cleanly provide crossgcc tarballs inside release archives. do it in config/submodules, like so: module.list shall say the relative path of a given file, once downloaded, relative to the given source tree. module.cfg shall be re-used, in the same way as for git submodules, but: subfile="url" subfile_bkup="backup url" do this, instead of: subrepo="url" subrepo_bkup="backup url" example entries in module.list: util/crossgcc/tarballs/binutils-2.41.tar.xz util/crossgcc/tarballs/gcc-13.2.0.tar.xz util/crossgcc/tarballs/gmp-6.3.0.tar.xz util/crossgcc/tarballs/mpc-1.3.1.tar.gz util/crossgcc/tarballs/mpfr-4.2.1.tar.xz util/crossgcc/tarballs/nasm-2.16.01.tar.bz2 util/crossgcc/tarballs/R06_28_23.tar.gz the "subrev" variable (in module.cfg) has been renamed to "subhash", so that this makes sense, and that name is common to both subfile/subrepo. the download logic from the vendor scripts has been re-used for this purpose, and it verifies files using sha512sum. therefore: when specifying subrepo(git submodule), subhash will still be a sha1 checksum, but: when specifying subfile(file, e.g. tarball), subhash will be a sha512 checksum the logic for both (subrepo and subfile) is unified, and has this rule: subrepo* and subfile* must never *both* be declared. the actual configuration of coreboot crossgcc tarballs will be done in a follow-up commit. this commit simply modifies the code to accomodate this. over time, this feature could be used for many other files within source trees, and could perhaps be expanded to allow extracting source tarballs in leiu of git repositories, but the latter is not yet required and thus not implemented. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08git.sh: remove unnecessary line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08vendor.sh: add a return at the end of mkdirsLeah Rowe
i don't like that it's not there, because of the quirks in sh behaviour. put it there to put my mind at ease. otherwise, this doesn't change any behaviour. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08vendor.sh: move download logic to lib.shLeah Rowe
in future revisions, i will make tarballs become subfiles, to complement submodules. e.g. crossgcc tarballs in coreboot Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08lib.sh: shorten a string in e()Leah Rowe
line exceeds 80 characters Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07move uefiextract to elf/uefitool/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07Add dependency scripts for Fedora 40 and Ubuntu 24.04fuel-pcbox
2024-06-07git.sh: fix submodule pathLeah Rowe
i accidentally cloned to tmpdir rather than tmpgit oops! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: simplify prep_submodules()Leah Rowe
copying the module list into tmpdir/ no longer makes sense, because it was only done before when we supported either running the list from "git submodule update", or module.list. since we only support handling of module.list, we can greatly simplify this function. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07git.sh: unified handling of git clone/reset/amLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>