summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-07rom.sh: new file, to replace script/romsLeah Rowe
stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06roms: remove unnecessary trees checksLeah Rowe
we no longer need to call trees -b for payloads, because build_depend is set in coreboot target.cfg files Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06coreboot: set build_depend on target.cfg filesLeah Rowe
set a default one in mkhelper.cfg Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06trees: rename load_target_config()Leah Rowe
rename it to configure_project, because the function now also handles building (a little bit), not just mere loading of configuration files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06trees: support build dependencies, not just fetchLeah Rowe
We already have this to an extent, e.g. the xtree variable. The xtree variable could probably be removed, in favour of this, and used for the same purpose. It works like this, for example: build_depend="coreboot/default grub/xhci seabios u-boot/gru_bob flashprog" the "/" denotes a tree, if it's a multi-tree project. However, specifying the entire multi-tree project without slash is possible, for example: build_depend="coreboot" this would specify that all coreboot trees must be built. This functionality will be used in follow-up commits, centralising script/trees into mk on the main directory, repacing "build". Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06GRUB: only load xhci from grub.cfgLeah Rowe
don't put it in the install modules. this works around a hanging issue on haswell thinkpads. when any usb device is inserted, GRUB will sometimes hang if started from the SeaBIOS payload, *while* the USB device is plugged in. plugging in the USB device after GRUB starts worked. it will have to be investigated more at a later date, but this simply configuration change works. the xhci module is already loaded explicitly, in grub.cfg Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-05trees: just do makeargs on coreboot, not cbmakeargLeah Rowe
stick the makeargs in mkhelper i previously did cbmakeargs because the old revisions had to define makeargs per-target otherwise. mkhelper was done specifically to solve that problem. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01trees: fix bad rm -Rf command (-Rf, not Rf)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01roms: fix bad comparison in configure_target()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01GRUB: use mkhelper.cfg for common variablesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: allow global config on multi-tree projectsLeah Rowe
config/data/PROJECT/mkhelper.cfg can be provided, for configuration, and it is loaded *before* target.cfg there are certain instances where we repeat a lot of config per tree, in multi-tree projects. for example, we have the exact same config per grub tree, besides tree name and revision number, for things like autoconf arguments. this last problem will be addressed, in a follow-up patch, and then expanded upon for other projects. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: handle all projects if project undefinedLeah Rowe
e.g. ./update trees -f if passed, this command would download every tree similarly, the -c option can be used in this way. this solves a longstanding issue: on the current, much more efficient design, it was not possible to systematically clean every project. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30vendor.sh: remove mkdirs()Leah Rowe
merge it into the only calling function Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: simpler for loop in git_am_patches()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: merge for loops in git_am_patches()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees and git.sh: tidy up global variablesLeah Rowe
some of the variables only initialised in git.sh are also used in the trees script, which is technically ok because git.sh is included from the trees script, but it makes more sense to declare them in the latter. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: simplified initialisation of "loc"Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: simplified distclean directory checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: condense fetch_targets() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: short git_prep command in fetch_targets()Leah Rowe
loc is already set, and will correspond to the same path, so we can quite conveniently use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: only do bare multi-tree clone on gitLeah Rowe
i forgot to add the check for CHANGELOG Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: simplified multi-tree bare repo cloneLeah Rowe
the git_prep function already creates the given directory where source code goes, so we don't need to do it from the trees script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: merge prepare_new_tree with fetch_targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees run_make_command: simpler distclean handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: condense copy_elf() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: add return to handle_defconfig()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: rename check_config to check_defconfigLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: remove variable "config_name"Leah Rowe
it's only ever used once, so just use the value that it's set to, without declaring the variable itself Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: rename variable "config" to defconfigLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: remove duplicate "xtree" variableLeah Rowe
it's already defined inside the trees script Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: remove unnecessary commontsLeah Rowe
behaviour described there is obvious just from analysing the while loop condition Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: condense run_make_command() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: condense handle_makefile() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: mv load_project_config load_target_configLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees, multi: download bare project *before* treesLeah Rowe
when downloading multi-tree projects, the rev can be reset to HEAD instead of the actual rev for a given target. this occurs when the bare repo (e.g. src/coreboot/coreboot) does not exist and has to be downloaded first. bare repository downloading does not rely on target.cfg, in this context, only pkg.cfg, but it uses the same variable names (e.g. "rev"). instead of using a separate variable name, thus increasing code complexity (which is the exact opposite of what i want to do), do the bare repository download first. this means that the git.sh script is much cleaner now, for multi-tree projects, in that it *only* copies the bare repo then runs git_prep; in that context, the bare repo is cloned directly by calling the relevant function from script/trees, which is the same behaviour as when cloning single-tree project sources. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: unified multi-tree configuration handlingLeah Rowe
the same function that loads configurations for single-tree projects has been merged with the function for multi-tree configs in git.sh, and that functionality has been removed from git.sh; now it is all unified in the trees script. as the saying goes: write one program to do one thing well. the purpose of git.sh is to download source code, but not to handle configuration files; the latter is meant to be handled by the trees script, which then calls into git.sh before running the build logic for that given project. additionally: the "seen" files are no longer handled, at all. the logic there was added ages ago, because at the time, i was considering whether to separate configuration into a new repository, so that users could more easily make their own configuration, so it was a guard against misconfiguration. however, that decision was canceled and we're always very careful not to introduce a loop; if a loop does occur, the worst that can possibly happen is you waste some CPU cycles. Instead, print (on standard output) what config file is being used, so the operator can see when an infinite loop occurs. ALSO: remove _setcfgarg in load_project_config() it was used to skip when a target.cfg file didn't exist, specifically on single-tree projects, but this is now handled using -f instead, on the while loop inside that function, so _setcfgarg is now a redundant variable. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29trees: unified handling of source downloadsLeah Rowe
run it from load_project_config() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29git.sh: rename Fetch_project_trees fetch_targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29git.sh: rename fetch_project_repo to fetch_projectLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29trees: better skip-clean string in handle_src_treeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29trees: add return to check_coreboot_utils()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29trees: simplify "utilmode" variable initialisationLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh readcfg: split the -b coreboot commandLeah Rowe
just add a line break to make the code more readable Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29trees mkpayload_grub: remove unnecessary checkLeah Rowe
these variables are initialised empty, then populated by reading a configuration file. it may be that in some cases, we want these variables to be empty. besides that, the "setcfg" command before it will throw an error if the module file is missing, and it is assumed that the variables would be set there. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh: remove unnecessary checkLeah Rowe
the next command is a copy, which would give us the error if the file doesn't exist, and an appropriate message Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh: condense inject() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh extract_kbc1126: use quote on file checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh extract_kbc1126ec: simplify build checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh: simplify e6400 vga rom file checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29vendor.sh: simplify variable checks for e6400vgaLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>