summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-28util/nvmutil: cmd_swap(): write sequentuallyLeah Rowe
the current code writes part 1 first, and part 0 next, on the disk, due to the way the swap works. with this change, swap still swaps the two parts of the file, on disk, but writes the new file sequentially. this change might speed up i/o on the file system, on HDDs. on SSDs, this change likely makes no difference at all.
2023-01-28util/nvmutil: don't use malloc()Leah Rowe
2023-01-28util/nvmutil: fix clang build errorsLeah Rowe
2023-01-28util/nvmutil: simplify rhex()Leah Rowe
don't use malloc(). instead, just load random bytes into a uint64_t
2023-01-27util/nvmutil: use gbe[] in word() and setword()Leah Rowe
this will make the code more flexible, if (when) i add changes that allow multiple commands to be used in a single run, on any given number of files
2023-01-27util/nvmutil: code cleanupLeah Rowe
2023-01-27util/nvmutil: call pledge() earlier, in main()Leah Rowe
2023-01-27util/nvmutil: remove unused #defineLeah Rowe
2023-01-27util/nvmutil: optimised disk readsLeah Rowe
only read the required number of bytes, per command
2023-01-27util/nvmutil: optimise cmd_swap()Leah Rowe
On many Lenovo GbE regions (in factory firmware), part 0 is invalid but part 1 is valid. This change means part 1 is checked first. If part 1 is valid, part 0 won't be checked at all (due to how most C compilers optimise). Most people are just going to extract the factory GbE file, modify it and re-insert it into the ROM image, so this causes a nice speedup.
2023-01-27util/nvmutil: optimise rhex() for speedLeah Rowe
don't constantly open/close the file: /dev/urandom only read 12 bytes at a time because of this change, the readFromFile() function now only handles gbe files
2023-01-27util/nvmutil: code cleanup in rhex()Leah Rowe
2023-01-26x230edp_12mb: Correct the path to data.vbtAlexei Sorokin
2023-01-17util/nvmutil: update copyright yearsLeah Rowe
2023-01-17util/nvmutil: limit bytes written per commandLeah Rowe
Massive reduction in number of bytes written, if copy/swap commands are not used.
2023-01-17util/nvmutil: make writeGbeFile more readableLeah Rowe
2023-01-17util/nvmutil: only write parts that are modifiedLeah Rowe
Old behaviour: always write both gbe sections. New behaviour: only write back what was changed.
2023-01-10blobs/inject: fix wrong nvmutil path for makeLeah Rowe
2023-01-10Merge branch 'veyron-uboot-dmreset' of alpernebbi/lbmk into masterLeah Rowe
2023-01-10Merge branch 'peach-uboot-usbehci' of alpernebbi/lbmk into masterLeah Rowe
2022-12-31u-boot: Enable USB_EHCI_EXYNOS on peach boardsAlper Nebi Yasak
The USB 2.0 ports on Exynos boards need the relevant driver enabled by USB_EHCI_EXYNOS. This is enabled by default depending on USB_EHCI_HCD. It's already enabled on snow and spring, but apparently not on peach boards, as discovered from other people's attempts to enable it [1][2]. Enable it also on the peach_pi and peach_pit. [1] https://gitlab.com/exynos5-mainline/u-boot/-/commit/8f12e43dbfdebbd29f49c2cb8bf6e9b6ea7e70c9 [2] https://gitlab.com/exynos5-mainline/u-boot/-/commit/11cacf55ad720dfca8799561a38b1da4732a3018 Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-31u-boot: Enable DM_RESET for veyron boardsAlper Nebi Yasak
The display driver on the veyron boards needs reset drivers, more specifically RESET_ROCKCHIP. This is enabled by default depending on DM_RESET, which an upstream commit enables for veyron_jerry claiming it fixes the display [1]. Enable it also in our configs, but for other veyrons as well. [1] https://lore.kernel.org/u-boot/20220928024046.2657593-1-sjg@chromium.org/ Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-28Do not rely on bashisms and behaviour undefined by the POSIX specification. ↵Ferass 'Vitali64' EL HAFIDI
Part 2 Signed-off-by: Ferass 'Vitali64' EL HAFIDI <vitali64pmemail@protonmail.com>
2022-12-27Do not rely on bashisms and behaviour undefined by the POSIX specification.Ferass 'Vitali64' EL HAFIDI
By making lbmk fully POSIX-compliant, it will be easier to port lbmk to other systems implementing POSIX such as Alpine Linux and FreeBSD. Signed-off-by: Ferass 'Vitali64' EL HAFIDI <vitali64pmemail@protonmail.com>
2022-12-24util/nvmutil: use err() more consistentlylbmkplaceholder
2022-12-24util/nvmutil: more robust pointer handlingLeah Rowe
i didn't like the previous commits, they felt really hacky running malloc and then changing the pointer directly just rubs me the wrong way fix that
2022-12-23util/nvmutil: optimise cmd_swap() furtherlbmkplaceholder
don't do xor swap. we know gbe2 is always 4KB higher than gbe in memory, so we can just set gbe2 to the value of gbe, and OR the size in bytes of 4KB into gbe2 this is only a marginal speed boost, negligible even, but it's done for the lulz
2022-12-23util/nvmutil: greatly optimise cmd_copy()lbmkplaceholder
similar to the last change by concept. we now write individual 4KB blocks per part 0 and 1, at the end of nvmutil, based on pointer values gbe and gbe2 instead of running memcpy, simply overwrite the pointer this results in less I/O, thus more speed
2022-12-23util/nvmutil: greatly optimise cmd_swap()lbmkplaceholder
instead of XOR-swapping every byte, have pointers to the two parts and *XOR swap the pointers*. at the end of the program execution, when writing, pwrite the two parts into the same file
2022-12-22scripts/blobs/inject: fix bad cbfstool build checklbmkplaceholder
2022-12-21util/nvmutil: simplified error handling in rhex()lbmkplaceholder
2022-12-21util/nvmutil: return errno when calling err()lbmkplaceholder
2022-12-21util/nvmutil: exit non-zero if close() failslbmkplaceholder
2022-12-14build/release/src: don't delete .gitcheck20221214lbmkplaceholder
2022-12-14correct a faulty if statement in build/release/srcLeah Rowe
2022-12-14disable grub and memtest on 1MB ROM configslbmkplaceholder
due to upstream bloat, these no longer fit. it will have to be fixed in the next libreboot release
2022-12-14util/nvmutil: only mask random unicast/local macslbmkplaceholder
Without this change, arbitrary MAC addresses will always be masked. This change restores the intended behaviour.
2022-12-14update the readmelbmkplaceholder
2022-12-14fix ./build boot roms alllbmkplaceholder
2022-12-11p2b_ls/p3b_f boards: Disable memtest payloadLeah Rowe
memtest can't fit in such tiny space alongside SeaBIOS
2022-12-11build/boot roms: add exits for failing commandsLeah Rowe
2022-12-11p2b_ls/p3b_f boards: no payload and no vga initLeah Rowe
The configs were enabling SeaBIOS payload, but this is to be handled by lbmk, not coreboot. Further, they were enabling VGA ROM execution in coreboot, but this should be handled by SeaBIOS. This board should not have a GRUB payload enabled either; this will be checked and fixed if necessary in the next commit.
2022-12-11Merge branch 'master' of qeeg/lbmk into masterLeah Rowe
2022-12-11Merge branch 'cros-postmerge-fixes' of alpernebbi/lbmk into masterLeah Rowe
2022-12-10Add P2B-LS and P3B-F configsqeeg
2022-12-10build/release/src: Include U-Boot sources in source archiveAlper Nebi Yasak
Add U-Boot to the source release script's modules list so that it is included in source release tarballs. Don't include the unused upstream source and .git directories. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/clean: Add helper script to clean U-Boot buildsAlper Nebi Yasak
Copy the resources/scripts/build/clean/crossgcc script and adapt it to run "make distclean" on U-Boot build trees. Some build artifacts persist after the run, so also run "git clean -fdx" if we can. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10dependencies/debian: Install dependencies for U-BootAlper Nebi Yasak
U-Boot build dependencies are listed on their online documentation [1], but the listed Debian packages also include test-only dependencies. While installing dependencies, install the packages necessary to build U-Boot, except for the test-only ones I could identify. [1] https://u-boot.readthedocs.io/en/latest/build/gcc.html Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10coreboot: Add qemu_arm64_12mb boardAlper Nebi Yasak
Add a build for QEMU AArch64 virtual machine using U-Boot as payload. Coreboot config is based on the following defconfig: CONFIG_CBFS_SIZE=0x00c00000 CONFIG_BOARD_EMULATION_QEMU_AARCH64=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_COREBOOT_ROMSIZE_KB_12288=y CONFIG_UART_PCI_ADDR=0x0 The resulting ROM can be booted with a command line like: qemu-system-aarch64 \ -machine virt,secure=on,virtualization=on \ -cpu cortex-a53 -m 1G \ -vga none -display none -serial stdio \ -bios bin/qemu_arm64_12mb/uboot_*.rom However, this is little more than a proof of concept because U-Boot upstream is missing coreboot integration on non-x86 boards, which could have been useful for e.g. a framebuffer. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add qemu_arm64_12mb boardAlper Nebi Yasak
Add a U-Boot payload build for the QEMU AArch64 virtual machine. The config is same as upstream "qemu-arm64" defconfig, but SYS_TEXT_BASE is set to 0x50000000 so that it doesn't conflict with coreboot. QEMU auto-generates and passes a device-tree file to U-Boot at runtime, there's no compile-time canonical version, so there's no need to set REMAKE_ELF or OF_EMBED. It's not immediately obvious if QEMU-specific drivers are available to support display output, but most coreboot integration is unavailable (depends on x86) and entire video subsystem is disabled in the U-Boot upstream defconfig. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 15:37:40 +0000