summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-13Merge pull request 'resources/coreboot/default/patches: Add patch for E6400 ↵Leah Rowe
SD card' (#78) from nic3-14159/lbmk:e6400-sd-card-patch into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/78
2023-06-12resources/coreboot/default/patches: Add patch for E6400 SD cardNicholas Chin
This fixes the PCI interrupt routing tables for the E6400 so that the SD card works. It is already merged in upstream but libreboot has not yet updated coreboot.
2023-06-12Merge pull request 'lbmk: Fix regressions' (#77) from ↵Leah Rowe
nic3-14159/lbmk:fix-lbmk into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/77
2023-06-12lbmk: Fix regressionsNicholas Chin
- A spurious semicolon caused the arguments to printf in die() to be executed instead of printed - ${@} in die() needs to be in quotes or else printf prints each word on a separate line - The number of arguments to main() does not include main itself so it should be comparing against 1 instead of 2 to determine if enough arguments were supplied.
2023-06-12util/spkmodem-recv: re-add full license headerLeah Rowe
i forked spkmodem-recv from coreboot, who forked it from gnu grub. gnu grub's version has the full header, with copyright declared as belonging to the fsf coreboot made changes after forking it, and later replaced the license declaration with an equivalent SPDX header, but they also removed the FSF's copyright declaration, which by itself does not void the declaration anyway, i just feel better re-adding the full declaration. make it so! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-12util/ich9gen: change default mac addressLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-10Merge pull request 'Add 4MB version of HP 8200 SFF' (#72) from ↵Leah Rowe
Riku_V/lbmk:hp8200sff_4mb into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/72
2023-06-10Merge pull request 'Update Git revision for bios_extract' (#74) from ↵Leah Rowe
nic3-14159/lbmk:update_bios_extract into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/74
2023-06-09Update Git revision for bios_extractNicholas Chin
My patches are now merged in upstream so just use that and drop the patch files.
2023-06-08util/spkmodem-recv: fix regressionLeah Rowe
The last bit wasn't being handled, *and* ascii_bit wasn't being reduced at all. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: make ringpos a global variableLeah Rowe
there's no point passing it as argument to a function. it's used across more than one function, so make it global Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: simplify sample_cnt/char resetLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: print stats in other functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: only print unhandled err on -dLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: make debug a runtime optionLeah Rowe
it's currently a build-time option make it a runtime option instead, so that every user can optionally make use of it, on all builds Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: always disable line bufferingLeah Rowe
thus, there's no need to handle flushing of stdout whatsoever, and the code can be greatly simplified ascii bits are still reset, when no input on stdin is given Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: simplify stdout flush logicLeah Rowe
when spkmodem-recv doesn't receive anything (via stdout) after a few frames, it's assumed that the console is dead and the buffered output is flushed this logic is assumed superfluous when -u is set Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-05util/spkmodem-recv: rename variables for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: split print_char() upLeah Rowe
the logic for *setting* a character, and the logic for outputting it, ought to be separate. do that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: reduce indent in print_char()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: squash a few code linesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: bsd-style indentLeah Rowe
my style was: 2 tabs. bsd-style, for extending a line, is 4 spaces. this style has grown on me, so let's do it here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: order prototypes per functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: warn on unhandled exit errorLeah Rowe
my style of C programming is this: always return errno upon exit from the program, or from a thread. handle errno in the calling/forking function. returning errno at the end of main has this intention: if an unhandled error occured, the program exits with non-zero status. a correctly written program should *never* return non-zero at the end of main, and if it does, this indicates a bug in the code (per my code style / philosophy). so, warn the user with a message if this occurs. the intention is that this message should never be printed. do not use assert() for this. i don't believe in that. such a test should always be present, for everyone. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: another minor code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: always set errno on err()Leah Rowe
This version of spkmodem uses err() to indicate an error, and the value of errno is used as exit status at all times, even when it is zero. When calling err(), it is intended that errno always be non-zero, so modify the code accordingly. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: minor code cleanupLeah Rowe
also be more thorough about errno value when calling pledge. rename variable in a for loop for clarity. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: handle sample errors correctlyLeah Rowe
when calling fread(), errno may be set to EOVEFLOW if the range being read will cause an integer overflow if end-of-file is reached, errno may not be set. when calling this function, you must check errno or check feof() - ferror() should also be checked, so this check is added immediately afterwards in the code ferror() does not set errno, so ERR() is used to set errno to ECANCELED as program exit status further separate reading of frames into a new function Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-04util/spkmodem-recv: simplify pulse checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-03util/nvmutil: call unveil earlier, and hardenLeah Rowe
The mentality behind pledge and unveil is that you should think ahead, so that large parts of code can run under extremely tight restrictions. The pledge calls have been adjusted accordingly, also. Disallow all unveil calls after the gbe file and the file /dev/urandom have been unveiled. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-03util/nvmutil: hardening: reduce pledges earlierLeah Rowe
also remove wpath if using the dump command Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-03util/nvmutil: fix faulty arg checkLeah Rowe
in practise, no other condition would be met and the program still worked. this is a pre-emptive fix.
2023-06-03util/nvmutil: cleanup: move logic out of main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-03util/nvmutil: major cleanup. simpler arg handling.Leah Rowe
Also hardened the pledges. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-02util/nvmutil: simplify writeGbeFile()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: don't call writeGbeFile if O_RDONLYLeah Rowe
This replaces a check in the function for O_RDONLY, and fixes the bug where the "dump" command triggers such error. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: code cleanup (pledge/unveil calls)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: harden pledge/unveil calls (OpenBSD)Leah Rowe
*Open* files at the start, then unveil. The same overall behaviour is observed. In the case that invalid arguments are given, simply opening a file does not cause much performance impact (if any). Restrict operations as early as possible in code. Bonus: writeGbeFile also hardened; if flags is O_RDONLY, it aborts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: fix faulty fd checkLeah Rowe
i screwed up in an earlier commit this change fixes a bug where on rhex(), each call would re-open /dev/urandom, resetting rfd Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: only swap/copy if checksum is validLeah Rowe
in practise, the file was never written unless the checksum was valid, but in the same of sloccount reduction i made it do the swap/copy before checking. while functionally ok, it never sat right with me. this is one example of where sloc count doesn't mean everything. code correctness is critical Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use bsd-style indentationLeah Rowe
the style was already quite similar, but extended lines in bsd are indented by 4 spaces instead of a tab. this style has grown on me, so i'm adopting it here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: clean up rhex()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: check correct return value on close()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: massive code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move includes to nvmutil.hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move xpledge/xunveil to nvmutil.hLeah Rowe
They don't precisely *pertain* to nvmutil, but they are useful helper functions for calling pledge/unveil in OpenBSD. Ideally, the main file should only contain core logic pertaining to the execution of *nvmutil*. Put xpledge() and xunveil() in nvmutil.h. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use SPDX license headersLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move non-functions to nvmutil.hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use even more macros (code cleanup)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: remove unnecessary parenthesesLeah Rowe