| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they all more or less use the same variables, so put
them all under include/blobutil.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
check based on whether defconfigs are available, which
are used extensively, rather than checking based on
whether target.cfg is available, which is not used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also: only return zero status if rom images were succesfully
built, and print a list of each rom image directory based on
what was actually compiled, rather than just saying that the
rom images are stored under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
just like the last patch, target.cfg handling is not
required in this script either. remove it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the handling of target.cfg is *not* required, in
this script. other mechanisms are also used for
error checking. this script only uses defconfigs.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this causes a saving of about 131KB uncompressed, when
i tested. we don't need mach kernel support. nobody will
ever use it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this causes a 6.7% decrease in the payload size
these file systems are microsoft(fat, ntfs) or mostly
oldschool amiga and beos file systems
also remove minix modules, and some old linux file
systems that nobody will use in 2023
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they weren't even handled at all, but they were referenced
under coreboot configuration
they don't need to be handled. lbmk simply includes these files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it doesn't really make sense for them to be under
blobs/ - nominally, they are blobs, but they are
well-understood data files containing config data,
that is easily parsed by tools like ich9show or
ifdtool (and tools like bincfg or nvmutil)
blobs/ has been re-purposed: this directory no longer
exists in lbmk, but it is created (and on .gitignore)
when needed, by blobutil
thus, the blobs/ directory shall only contain vendor
files, and only those files that libreboot scrubs from
releases. therefore, build/release/src can (and has
been) simplified; it currently copies just the ifd and
gbe files from blobs/, selectively, and this logic is
quite error prone, requiring maintenance. now, the
build/release/src script simply copies config/ (which
only ever contains distributable files) and entirely
ignores the blobs/ directory
the blob download script already creates the required
directory, except for the sch5545 download; this is
now fixed
lbmk code size is slightly smaller, due to this patch
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the resulting changes are what i will push. this prevents
the coreboot build system from asking for user input.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This cuts down on build time, and it will allow libreboot
to remove large chunks of code.
these ifd/gbe configs are just binary-encoded config files,
in a format well-understood. they can easily be opened up
and displayed, using ich9show or ifdtool, and manipulated
by these tools; bincfg can generate them from scratch, and
nvmutil can change mac addresses, for example.
so, do this and remove from lbmk the following:
* ich9utils (which contains ich9gen) - not needed anymore
* code in lbmk for handling ich9gen and insertions; the
coreboot build system is now used, for this same purpose,
so remove such code from lbmk
this results in a massive code size reduction (thousands of
lines) in lbmk; smaller when only looking at the build
system, but much larger when you consider that ich9utils
is also removed (about 3k sloc)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
a follow-up patch will make use of these, rather than ich9gen,
and ich9gen will be deleted.
these files were in fact generated *by* ich9gen.
coreboot has ifdtool and bincfg, the latter of which can
generate both ifd and gbe files for ich9m. that, and nvmutil
which is part of libreboot, can change gbe mac addresses.
i was going to replace ich9gen with a script that would run
bincfg, ifdtool and nvmutil, to greatly reduce code size,
because ich9gen is about 3k sloc.
however, in practise we would always generate the same ifd
config, and basically only change the mac address if that's
what the user wants; nvmutil can already do that just fine.
so, just include the binaries directly.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use a subshell for changing directory, and use more
verbose error messages under fault conditions
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it needed to be make-cleaned
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the mkdir command in update/project/repo, added for
pico-pi integration, broke a bunch of other downloads.
the fix is a bit of a hack but it should hold for now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
nic3-14159/lbmk:e6430 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/124
|
|
This was only tested on the iGPU model, though a dGPU model does exist.
The vendor firmware used a 16KiB gbe.bin, which was modified with a
random MAC address as well as shrinking it to 8KiB. As with the E6400,
GRUB doesn't like the way the EC implements the keyboard controller and
thus GRUB payloads are disabled at this time. Suspend does not currently
work, and this is believed to be due to the EC controlling the DRAM
reset gate which is required to prevent DRAM from being reset on resume.
With some tweaks, the e6400-flash-unlock utility also works on this
system, though both flash chips can be accessed through removal of only
the keyboard.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/123
|
|
More than 90% of cats were thus terminated.
read (shell built-in) is better at reading, and dogs are better pets.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
use official libreboot repos
the codeberg repo makes reference to riku's repo
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Riku_V/lbmk:mkserprog into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/122
|
|
./build rpi-pico serprog
build bin/serprog/rpi-pico-serprog.uf2
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
the way this script works, it only copies what was built,
but it currently operatios as though coreboot/default
always exists, and then cleans the kbc1126 util
this patch fixes such buggy behaviour
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The -c option is added for distclean, and -x for crossgcc-clean,
in handle/make/config
about 100 sloc removed from lbmk
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The -T option specifies how many threads xz shall use.
The -T value of zero shall dictate that xz use so many
threads as there are CPUs, on the host system.
This will probably speed up the release process a bit.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i have in fact tested whether many of these targets (ivy,
sandy and haswell on intel) boot without microcode, and many
do, but it's not as well tested
the older targets like i945, x4x, pineview and gm45 are
well-tested without microcode; ditto fam10/15h amd.
lbmk supports providing roms with and/or without microcode.
for the targets touched in this commit, lbmk now only
provides images with microcode included by default.
manual removal (with cbfstool) is still possible, if you want
to do that.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The same ROM images that you flash on Intel GPU variants,
are now flashed on Nvidia models. The same ROM will work
on both. If an Intel GPU variant is present, libgfxinit
is used, and the VGA ROM is used if an Nvidia GPU variant;
however, release ROMs will scrub the nvidia option ROM,
so release ROMs will only work on Intel GPUs unless you
run the blobutil inject command.
I decided to no longer have this under WIP, but to put
it in master. The issue with it pertains to video drivers,
which is not Libreboot's problem.
Nouveau crashes under Linux, so use "nomodeset" if it does.
The "nv" drivers in BSD systems work very well.
The nvidia model of E6400 isn't recommended for other
reasons, namely: poor thermal cooling (thermal pad on
the GPU) and that Nvidia GPU doesn't get very good
performance on any libre drivers anyway. The Intel GPU
variant is better, in terms of power efficiency and
software support; the intel variant also works with
native graphics initialisation in coreboot.
This board port already only enables SeaBIOS, which will
simply execute the VGA ROM. Blobutil already supports
reading the config, detecting that a VGA ROM is needed,
because that part of the WIP E6400 branch was already
merged in lbmk master.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they weren't being copied back, after running the
make command. i overlooked this when testing in
the previous optimisations, because i only tested
building, not modification or updating of configs
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it wasn't being checked for, to run cbfstool.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the current check only worked if it had already
been built, when checking for the Makefile
however, running this during build/release/src
caused problems, hence the current check
so: perform the same check, but as a fallback for
cmake failing (and if that check fails, only then
will err be called)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it looks a bit cluttered just sitting there in
the main script. make it an include.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
nasty little hack to fix another nasty little hack,
which i call script/build/release/src
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
coreboot, seabios and u-boot were not being copied at all
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk never needed a makefile, because the build system
is all shell scripting; the former makefile simply called
those scripts, in a way that was mostly superfluous
build/release/src was still trying to copy it, so let's
remove it from that file
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's i, not 1
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the fetch scripts call themselves, for dependencies
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it was previously trying to "continue", despite not being
inside a loop. the correct instruction would have
been "return 0", but then I thought it'd be better to
err here
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this means the unified /tmp handling is now provided for
in both the former "fetch" and "fetch_trees" script, which
are now (respectively):
./update project repo
./update project trees
if the fetch scripts weren't cleaning /tmp before, they
now are, because lbmk handles it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
export TMPDIR to scripts, and handle it in a way that
we know lbmk set it
delete it at the end of the parent process, but not child
processes; when the lbmk script calls itself, child processes
will not delete the tmp directory.
some scripts in lbmk weren't cleaning up the tmpfiles they
made, and they still don't, but this mitigates that.
now in follow-up commits, i can start cleaning up those
scripts too.
not handled by this patch:
if the user cancels lbmk (ctrl+c), the tmp directory will
still be there. this too will be handled, in subsequent
patches
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
libreboot's build system, lbmk, *is* available to use
in releases aswell (use the _src tarball), but it is
mostly intended for development, in lbmk.git
well, there's not much point wasting time / disk space
generating no-microcode roms within lbmk
they should be generated only at release time, alongside
the default ones
this patch implements that, thus speeding up the build
process and saving disk usage during development
the other alternative was to add a new option in
build/boot/roms, -m, that would opt in to removing them,
but this is extra complexity for something that is ill
advised and only provided to appease certain people
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
