summaryrefslogtreecommitdiff
path: root/script
diff options
context:
space:
mode:
Diffstat (limited to 'script')
-rwxr-xr-xscript/roms165
1 files changed, 56 insertions, 109 deletions
diff --git a/script/roms b/script/roms
index 92f79db4..6ea6a1e1 100755
--- a/script/roms
+++ b/script/roms
@@ -10,6 +10,8 @@ set -u -e
. "include/lib.sh"
+tmprom="$tmpdir/rom"
+
seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
cfgsdir="config/coreboot"
rp2040src="src/pico-serprog"
@@ -23,7 +25,7 @@ stm32dir="$stm32src/boards"
# Disable all payloads by default.
# target.cfg files have to specifically enable [a] payload(s)
pv="payload_uboot payload_seabios payload_memtest t payload_grub"
-v="romdir cbrom initmode displaymode cbcfg targetdir tree release ubootelf"
+v="romdir initmode displaymode cbcfg targetdir tree release ubootelf"
v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv"
eval `setvars "n" $pv`
eval `setvars "" $v boards targets serdir ser`
@@ -53,7 +55,7 @@ main()
for x in $boards; do
[ -n "$ser" ] && mkserprogfw "$ser" "$x"
[ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \
- configure_target "$x" && build_payloads && build_board && \
+ configure_target "$x" && build_board && \
[ -d "bin/$board" ] && targets="$targets, $x"; continue
done
@@ -61,23 +63,18 @@ main()
mkrom_tarball "bin/serprog_$ser" && return 0
[ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled"
- printf "DO NOT flash images from elf/ - use bin/ instead. ALSO:\n"
- printf "%s\n" "$kbnotice"
+ printf "DO NOT flash from elf/ - use bin/ - ALSO:\n%s\n" "$kbnotice"
}
mkserprogfw()
{
x_ mkdir -p "bin/serprog_$1"
- if [ "$1" = "rp2040" ]; then
- x_ cmake -DPICO_BOARD="$2" -DPICO_SDK_PATH="$picosdk" \
- -B "$rp2040src/build" "$rp2040src"
- x_ cmake --build "$rp2040src/build"
- else
- x_ make -C "$stm32src" libopencm3-just-make BOARD=$2
- x_ make -C "$stm32src" BOARD=$2
- fi
+ [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \
+ -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \
+ x_ cmake --build "$rp2040src/build"
+ [ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \
+ BOARD=$2 && x_ make -C "$stm32src" BOARD=$2
eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\""
- printf "Look in bin/serprog_%s/ for images\n" "$1"
}
serlist()
@@ -89,9 +86,8 @@ configure_target()
{
eval `setvars "n" $pv`
eval `setvars "" $v`
- board="$1"
- targetdir="$cfgsdir/$board"
+ board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board"
# Override the above defaults using target.cfg
eval `setcfg "$targetdir/target.cfg"`
@@ -100,6 +96,10 @@ configure_target()
[ "$xbmk_release" = "y" ] && [ "$release" = "n" ] && return 1
[ "$board" = "$tree" ] && return 1
+ cbdir="src/coreboot/$tree"
+ cbfstool="elf/cbfstool/$tree/cbfstool"
+ [ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
+
[ -n "$uboot_config" ] || uboot_config="default"
[ "$payload_uboot" = "y" ] || payload_seabios="y"
[ "$payload_grub" = "y" ] && payload_seabios="y"
@@ -112,29 +112,7 @@ configure_target()
grubelf="elf/grub/$grubtree/payload/grub.elf"
[ "$payload_memtest" = "y" ] || payload_memtest="n"
- [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
- [ "$payload_uboot" = "y" ] && payload_memtest="n"; return 0
-}
-
-build_payloads()
-{
- romdir="bin/$board"
- cbdir="src/coreboot/$board"
- [ "$board" = "$tree" ] || cbdir="src/coreboot/$tree"
- cbfstool="elf/cbfstool/$tree/cbfstool"
- cbrom="$cbdir/build/coreboot.rom"
-
- [ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
- [ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus
- [ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios
- [ "$payload_grub" = "y" ] && x_ ./update trees -b grub $grubtree
-
- [ "$payload_uboot" = "y" ] || return 0
- x_ ./update trees -b u-boot $board
- ubdir="elf/u-boot/$board/$uboot_config"
- ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
- ubootelf="$ubdir/u-boot"
- [ -f "$ubootelf" ] || $err "$board: Can't find u-boot"; return 0
+ [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0
}
build_board()
@@ -142,17 +120,15 @@ build_board()
x_ rm -Rf "$romdir"
for it in "normal" "vgarom" "libgfxinit"; do
- initmode="$it"
- hmode="vesafb"
+ initmode="$it"; hmode="vesafb"
[ "$initmode" = "vgarom" ] || hmode="corebootfb"
modes="$hmode txtmode"
- for y in $modes; do
- displaymode="$y"
- [ "$initmode" = "normal" ] && \
+ for dt in $modes; do
+ displaymode="$dt"; [ "$initmode" = "normal" ] && \
[ "$displaymode" != "txtmode" ] && continue
cbcfg="$targetdir/config/${initmode}_$displaymode"
[ "$initmode" = "normal" ] && cbcfg="${cbcfg%_*}"
- e "$cbcfg" f not || build_roms; x_ rm -f "$cbrom"
+ e "$cbcfg" f not || build_roms; x_ rm -f "$tmprom"
done
done
}
@@ -161,92 +137,63 @@ build_roms()
{
x_ ./update trees -b coreboot $board
- _cbrom="$cbelfdir/$board/${initmode}_$displaymode"
- [ "$initmode" = "normal" ] && _cbrom="${_cbrom%"_$displaymode"}"
- _cbrom="$_cbrom/coreboot.rom"
- cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
- x_ cp "$_cbrom" "$cbrom"
+ cbuild="$cbelfdir/$board/${initmode}_$displaymode"
+ [ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}"
+ x_ cp "$cbuild/coreboot.rom" "$tmprom"
- [ "$payload_memtest" != "y" ] || cbfs "$cbrom" \
- "elf/memtest86plus/memtest.bin" img/memtest
[ "$payload_seabios" = "y" ] && build_seabios_roms
- [ "$payload_uboot" = "y" ] && x_ cp "$_cbrom" "$cbrom" && \
- build_uboot_roms; return 0
-}
-
-build_seabios_roms()
-{
- if [ "$payload_grub" = "y" ]; then # SeaBIOS with GRUB
- t="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
- x_ cp "$cbrom" "$t"
- build_seagrub_roms "$t" "seabios_withgrub"
- else # SeaBIOS only
- t="$(mkSeabiosRom "$cbrom")" || \
- $err "build_seabios_roms: cannot build tmprom"
- newrom="$romdir/seabios_${board}_${initmode}_$displaymode"
- [ "$initmode" = "normal" ] && newrom="$romdir/seabios" \
- && newrom="${newrom}_${board}_$initmode"
- cprom cp "$t" "$newrom.rom"
- fi
- x_ rm -f "$t"
-}
-
-build_seagrub_roms()
-{
- tmpmv="$(mkSeabiosRom "$1")" || $err "$board: !mk grub tmprom"
- x_ mv "$tmpmv" "$1"
-
- # we only need insert grub.elf once, for each coreboot config:
- cbfs "$1" "$grubelf" "img/grub2"
-
- printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
- > "$tmpdir/tmpcfg" || $err "set grub_scan_disk, $grub_scan_disk"
- cbfs "$1" "$tmpdir/tmpcfg" scan.cfg raw
+ [ "$payload_uboot" = "y" ] || return 0
- newrom="$romdir/seabios_withgrub_${board}_${initmode}_$displaymode.rom"
- [ "$initmode" = "normal" ] && newrom="$romdir/seabios_withgrub_" \
- && newrom="$newrom${board}_$initmode.rom"
- cprom cp "$1" "$newrom"
+ x_ ./update trees -b u-boot $board
+ ubdir="elf/u-boot/$board/$uboot_config"
+ ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
+ ubootelf="$ubdir/u-boot"
+ [ -f "$ubootelf" ] || $err "$board: Can't find u-boot"
- cbfs "$1" "$grubdata/bootorder" bootorder raw # SeaGRUB
- cprom cp "$1" "${newrom%.rom}_grubfirst.rom"
+ cbfs "$tmprom" "$ubootelf" "fallback/payload"
+ cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
}
-# make a rom in /tmp/ and then print the path of that ROM
-mkSeabiosRom() {
- tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" # 1=cbrom, 2=cbfs path
+build_seabios_roms()
+{
_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
+ x_ ./update trees -b seabios
+
+ pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub"
+ newrom="$romdir/${pstr}_${board}_$initmode.rom"
+ [ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom"
- x_ cp "$1" "$tmprom"
cbfs "$tmprom" "$_seabioself" "fallback/payload"
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
z="2"; [ "$initmode" = "vgarom" ] && z="0"
x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
- [ "$initmode" != "libgfxinit" ] || cbfs "$tmprom" "$seavgabiosrom" \
+ [ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \
vgaroms/seavgabios.bin raw
- printf "%s\n" "$tmprom"
-}
+ if [ "$payload_grub" = "y" ]; then
+ x_ ./update trees -b grub $grubtree
+ cbfs "$tmprom" "$grubelf" "img/grub2"
+ printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
+ > "$tmpdir/tmpcfg" || $err "$board: !insert scandisk"
+ cbfs "$tmprom" "$tmpdir/tmpcfg" scan.cfg raw
+ fi
-build_uboot_roms()
-{
- tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
- newrom="$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
- x_ cp "$cbrom" "$tmprom"
- cbfs "$tmprom" "$ubootelf" "fallback/payload"
- cprom mv "$tmprom" "$newrom"
+ [ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus && \
+ cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest
+
+ cprom "$newrom" && [ "$payload_grub" = "y" ] && \
+ cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \
+ cprom "${newrom%.rom}_grubfirst.rom"; return 0
}
cprom()
{
- printf "Creating target image: %s\n" "$3"
-
- x_ mkdir -p "${3%/*}"
- x_ $1 "$2" "$3"
- [ "$xbmk_release" = "y" ] && mksha512sum "$3" "vendorhashes" && \
- x_ ./vendor inject -r "$3" -b "$board" -n nuke; return 0
+ printf "Creating target image: %s\n" "$1"
+ x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1"
+ [ "$xbmk_release" = "y" ] && mksha512sum "$1" "vendorhashes" && \
+ x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0
}
main $@