diff options
Diffstat (limited to 'script')
| -rwxr-xr-x | script/roms | 190 | ||||
| -rwxr-xr-x | script/trees | 42 |
2 files changed, 17 insertions, 215 deletions
diff --git a/script/roms b/script/roms deleted file mode 100755 index 14822339..00000000 --- a/script/roms +++ /dev/null @@ -1,190 +0,0 @@ -#!/usr/bin/env sh -# SPDX-License-Identifier: GPL-3.0-or-later -# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> -# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> -# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> -# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> -# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com> - -set -u -e - -. "include/lib.sh" - -tmprom="$TMPDIR/rom" - -seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" -cfgsdir="config/coreboot" -rp2040src="src/pico-serprog" -rp2040x="$rp2040src/build/pico_serprog.uf2" -picosdk="src/pico-sdk" -rp2040dir="$picosdk/src/boards/include/boards" -stm32src="src/stm32-vserprog" -stm32x="$stm32src/stm32-vserprog.hex" -stm32dir="$stm32src/boards" - -# Disable all payloads by default. -# target.cfg files have to specifically enable [a] payload(s) -pv="payload_uboot payload_seabios payload_memtest payload_grub" -v="romdir initmode displaymode targetdir tree release ubootelf" -v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv" -eval `setvars "n" $pv` -eval `setvars "" $v boards targets serdir ser` - -main() -{ - while [ $# -gt 0 ]; do - if [ "$1" = "serprog" ]; then - [ $# -lt 2 ] && $err "serprog type not set" - [ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \ - $err "invalid serprog type" - eval "x_ ./update trees -f \"\${${2}src##*/}\"" - ser="$2" && shift 2 && continue - fi - [ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return 0 - [ "$1" = "all" ] && shift 1 && continue - boards="$1 $boards"; shift 1 - done - - [ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \ - config/coreboot)" || $err "can't list coreboot boards" - - [ -n "$ser" ] && \ - eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\"" - [ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")" - - for x in $boards; do - [ -n "$ser" ] && mkserprogfw "$ser" "$x" - [ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \ - configure_target "$x" && build_roms && \ - [ -d "bin/$board" ] && targets="$targets, $x" && \ - [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x" - done - - [ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \ - mkrom_tarball "bin/serprog_$ser" && return 0 - - [ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled" - [ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }" - [ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser" - printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice" -} - -mkserprogfw() -{ - x_ mkdir -p "bin/serprog_$1" - [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \ - -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \ - x_ cmake --build "$rp2040src/build" - [ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \ - BOARD=$2 && x_ make -C "$stm32src" BOARD=$2 - eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\"" -} - -serlist() -{ - basename -a -s .h "$1/"*.h || $err "$1: can't list boards" -} - -configure_target() -{ - eval `setvars "n" $pv` - eval `setvars "" $v` - - board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board" - - # Override the above defaults using target.cfg - eval `setcfg "$targetdir/target.cfg"` - - [ -z "$tree" ] && $err "$board: tree not defined" - [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 - [ "$board" = "$tree" ] && return 1 - - x_ ./update trees -b coreboot $board - - cbfstool="elf/cbfstool/$tree/cbfstool" - x_ ./update trees -b coreboot utils $tree - - [ -n "$uboot_config" ] || uboot_config="default" - [ "$payload_uboot" = "y" ] || payload_seabios="y" - [ "$payload_grub" = "y" ] && payload_seabios="y" - [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \ - $err "$board: U-Boot and SeaBIOS/GRUB are both enabled." - - [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata" - - [ -n "$grubtree" ] || grubtree="default" - grubelf="elf/grub/$grubtree/payload/grub.elf" - - [ "$payload_memtest" = "y" ] || payload_memtest="n" - [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0 -} - -build_roms() -{ - x_ rm -Rf "$romdir" - - for cbcfg in "$targetdir/config/"*; do - [ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \ - && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt" - initmode="${cn%%_*}"; chkvars initmode displaymode - e "$cbcfg" f not || add_payloads - done; x_ rm -f "$tmprom" -} - -add_payloads() -{ - cbuild="$cbelfdir/$board/${initmode}_$displaymode" - [ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}" - x_ cp "$cbuild/coreboot.rom" "$tmprom" - - [ "$payload_seabios" = "y" ] && add_seabios_payload - [ "$payload_uboot" = "y" ] || return 0 - - ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \ - && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot" - [ -f "$ubootelf" ] || $err "$board: Can't find u-boot" - - cbfs "$tmprom" "$ubootelf" "fallback/payload" - cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom" -} - -add_seabios_payload() -{ - _seabioself="elf/seabios/default/$initmode/bios.bin.elf" - - pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub" - newrom="$romdir/${pstr}_${board}_$initmode.rom" - [ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom" - - cbfs "$tmprom" "$_seabioself" "fallback/payload" - x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup - - z="2"; [ "$initmode" = "vgarom" ] && z="0" - x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec - x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum - [ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \ - vgaroms/seavgabios.bin raw - - if [ "$payload_grub" = "y" ]; then - cbfs "$tmprom" "$grubelf" "img/grub2" - printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \ - > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk" - cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw - fi - - [ "$payload_memtest" = "y" ] && \ - cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest - - cprom "$newrom" && [ "$payload_grub" = "y" ] && \ - cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \ - cprom "${newrom%.rom}_grubfirst.rom"; return 0 -} - -cprom() -{ - x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1" - [ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \ - x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0 -} - -main $@ diff --git a/script/trees b/script/trees index ab321869..8bcd798c 100755 --- a/script/trees +++ b/script/trees @@ -8,10 +8,15 @@ set -u -e . "include/lib.sh" . "include/git.sh" +. "include/rom.sh" + +. "config/data/pico-serprog/mkhelper.cfg" +. "config/data/coreboot/mkhelper.cfg" eval `setvars "" xarch cdir defconfig cmakedir xlang mode makeargs elfdir cmd \ project target target_dir targets xtree _f target1 bootstrapargs mkhelper \ - autoconfargs listfile autogenargs btype tree rev tree_depend build_depend` + autoconfargs listfile autogenargs btype tree rev tree_depend build_depend \ + premake release postmake` main() { @@ -46,6 +51,7 @@ main() datadir="config/data/$project" cfgsdir="config/$project" listfile="$datadir/build.list" # needed on multi, optional on single + [ -f "$listfile" ] || listfile="" # optional on all projects remkdir "${tmpgit%/*}" @@ -61,7 +67,6 @@ main() build_project() { configure_project "$cfgsdir" || return 0 - [ -f "$listfile" ] || listfile="" # optional on single-tree dest_dir="$elfdir" [ ! -f "$listfile" ] || elfcheck || return 0 @@ -77,10 +82,7 @@ build_project() build_targets() { - [ "$elfdir" = "elf/coreboot" ] && elfdir="$cbelfdir" - [ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist" - [ -f "$listfile" ] || $err "list file, $listfile, does not exist" # Build for all targets if no argument is given [ $# -gt 0 ] && target1="$1" @@ -94,12 +96,16 @@ build_targets() handle_targets() { for x in $targets; do + [ "$x" = "list" ] && x_ ls -1 "config/$project" && \ + listfile="" && break target="$x" printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target" [ "$project" != "coreboot" ] || [ -n "$mode" ] || \ [ "$target1" = "utils" ] || x_ ./vendor download $target x_ handle_defconfig - done + [ -n "$mode" ] || [ -z "$postmake" ] || $postmake || \ + $err "$project/$target: !postmake: $postmake"; continue + done; return 0 } handle_defconfig() @@ -141,8 +147,8 @@ handle_src_tree() configure_project() { - eval `setvars "" xarch xlang bootstrapargs autoconfargs xtree \ - tree_depend makeargs btype mkhelper build_depend` + eval `setvars "" xarch xlang build_depend autoconfargs xtree postmake \ + tree_depend makeargs btype mkhelper bootstrapargs premake release` [ -f "$1/target.cfg" ] || btype="auto" [ -f "$datadir/mkhelper.cfg" ] && eval `setcfg "$datadir/mkhelper.cfg"` @@ -159,6 +165,7 @@ configure_project() && break; _tcfg="${_tcfg%/*/target.cfg}/$tree/target.cfg" done + [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 [ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || return 1 [ -z "$mode" ] && for bd in $build_depend; do @@ -244,6 +251,8 @@ handle_makefile() run_make_command() { + [ -z "$premake" ] || [ -n "$mode" ] || $premake || $err "!$premake" + check_cmake "$cdir" && [ -z "$mode" ] && check_autoconf "$cdir" check_makefile "$cdir" || return 1 @@ -280,23 +289,6 @@ check_makefile() [ -f "$1/GNUmakefile" ] || return 1; return 0 } -mkpayload_grub() -{ - eval `setvars "" grub_modules grub_install_modules` - eval `setcfg "$grubdata/module/$tree"` - - x_ rm -f "$cdir/grub.elf" - - "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \ - -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \ - --fonts= --themes= --locales= --modules="$grub_modules" \ - --install-modules="$grub_install_modules" \ - "/boot/grub/grub_default.cfg=${cdir}/.config" \ - "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \ - "/background.png=$grubdata/background/background1280x800.png" || \ - $err "$tree: cannot build grub.elf"; return 0 -} - copy_elf() { [ -f "$listfile" ] && x_ mkdir -p "$dest_dir" && while read -r f; do |