1 files changed, 0 insertions, 248 deletions
diff --git a/script/update/vendor/inject b/script/update/vendor/inject
deleted file mode 100755
index c4a7f702..00000000
--- a/script/update/vendor/inject
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-only
-# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2023 Leah Rowe <leah@libreboot.org>
-
-. "include/err.sh"
-. "include/option.sh"
-
-nvmutil="util/nvmutil/nvm"
-
-eval "$(setvars "" archive rom modifygbe nukemode release new_mac)"
-
-main()
-{
-	[ $# -lt 1 ] && err "No options specified."
-	[ "${1}" = "listboards" ] && \
-		listitems config/coreboot && exit 0
-
-	archive="${1}"
-
-	while getopts n:r:b:m: option; do
-		case "${option}" in
-		n) nukemode="${OPTARG}" ;;
-		r) rom=${OPTARG} ;;
-		b) board=${OPTARG} ;;
-		m) modifygbe=true
-		   new_mac=${OPTARG} ;;
-		esac
-	done
-
-	check_board
-	build_dependencies
-	inject_vendorfiles
-	[ "${nukemode}" = "nuke" ] && return 0
-	printf "Friendly reminder (this is *not* an error message):\n"
-	printf "Please always ensure that the files were inserted correctly.\n"
-}
-
-check_board()
-{
-	if ! check_release "${archive}" ; then
-		[ -f "${rom}" ] || \
-			err "check_board: \"${rom}\" is not a valid path"
-		[ -z "${rom+x}" ] && \
-			err "check_board: no rom specified"
-		[ ! -z ${board+x} ] || \
-			board=$(detect_board "${rom}")
-	else
-		release="y"
-		board=$(detect_board "${archive}")
-	fi
-
-	boarddir="${cbcfgsdir}/${board}"
-	[ -d "${boarddir}" ] && return 0
-	err "check_board: board ${board} not found"
-}
-
-check_release()
-{
-	[ -f "${archive}" ] || return 1
-	[ "${archive##*.}" = "xz" ] || return 1
-	printf "%s\n" "Release archive ${archive} detected"
-}
-
-# This function tries to determine the board from the filename of the rom.
-# It will only succeed if the filename is not changed from the build/download
-detect_board()
-{
-	path="${1}"
-	filename=$(basename ${path})
-	case ${filename} in
-	grub_*)
-		board=$(echo "${filename}" | cut -d '_' -f2-3) ;;
-	seabios_withgrub_*)
-		board=$(echo "${filename}" | cut -d '_' -f3-4) ;;
-	*.tar.xz)
-		_stripped_prefix=${filename#*_}
-		board="${_stripped_prefix%.tar.xz}" ;;
-	*)
-		err "detect_board: could not detect board type"
-	esac	
-	[ -d "${boarddir}/" ] || \
-		err "detect_board: dir, ${boarddir}, doesn't exist"
-	printf "%s\n" "${board}"
-}
-
-build_dependencies()
-{
-	[ -d "${cbdir}" ] || x_ ./update project trees -f coreboot default
-	if [ ! -f "${cbfstool}" ] || [ ! -f "${ifdtool}" ]; then
-		x_ ./update project trees -b coreboot utils default
-	fi
-	[ -z "${new_mac}" ] || [ -f "${nvmutil}" ] || x_ make -C util/nvmutil
-	[ "${nukemode}" = "nuke" ] && return 0
-	x_ ./update vendor download ${board}
-}
-
-inject_vendorfiles()
-{
-	[ "${release}" != "y" ] && x_ patch_rom "${rom}" && return 0
-	printf "patching release images\n"
-	patch_release_roms
-}
-
-patch_release_roms()
-{
-	_tmpdir="tmp/romdir"
-	x_ rm -Rf "${_tmpdir}"
-	x_ mkdir -p "${_tmpdir}"
-	x_ tar -xf "${archive}" -C "${_tmpdir}"
-
-	for x in "${_tmpdir}"/bin/*/*.rom ; do
-		printf "patching rom: %s\n" "$x"
-		x_ patch_rom "${x}"
-	done
-	for x in "${_tmpdir}"/bin/*/*_nomicrocode.rom ; do
-		[ -f "${x}" ] || continue
-		[ -f "${x%_nomicrocode.rom}.rom" ] || continue
-
-		x_ cp "${x%_nomicrocode.rom}.rom" "${x}"
-		x_ "${cbfstool}" "${x}" remove -n cpu_microcode_blob.bin
-	done
-
-	(
-	x_ cd "${_tmpdir}/bin/"*
-
-	# NOTE: For compatibility with older rom releases, defer to sha1
-	[ "${nukemode}" = "nuke" ] || \
-	    sha512sum --status -c vendorhashes || \
-	    sha1sum --status -c vendorhashes || \
-	    sha512sum --status -c blobhashes || \
-	    sha1sum --status -c blobhashes || \
-	    err "patch_release_roms: ROMs did not match expected hashes"
-	)
-
-	if [ "${modifygbe}" = "true" ]; then
-		for x in "${_tmpdir}"/bin/*/*.rom ; do
-			modify_gbe "${x}"
-		done
-	fi
-
-	[ -d bin/release ] || x_ mkdir -p bin/release
-	x_ mv "${_tmpdir}"/bin/* bin/release/
-
-	printf "Success! Your ROMs are in bin/release\n"
-
-	x_ rm -Rf "${_tmpdir}"
-}
-
-patch_rom()
-{
-	rom="${1}"
-
-	# we don't process no-microcode roms; these are
-	# instead re-created at the end, after re-inserting
-	# on roms with microcode, by copying and then removing,
-	# so that the hashes will match (otherwise, cbfstool
-	# may sometimes insert certain vendor files at the wrong offset)
-	# (unless nomicrocode is the only config provided)
-	[ "${rom}" != "${rom%_nomicrocode.rom}.rom" ] && \
-	[ -f "${rom%_nomicrocode.rom}.rom" ] && \
-	[ "${release}" = "y" ] && return 0
-
-	x_ check_defconfig "${boarddir}"
-
-	set -- "${boarddir}/config/"*
-	. "${1}" 2>/dev/null
-
-	[ "$CONFIG_HAVE_MRC" = "y" ] && \
-		inject "mrc.bin" "${CONFIG_MRC_FILE}" "mrc" "0xfffa0000"
-	[ "${CONFIG_HAVE_ME_BIN}" = "y" ] && \
-		inject "IFD" "${CONFIG_ME_BIN_PATH}" "me"
-	[ "${CONFIG_KBC1126_FIRMWARE}" = "y" ] && \
-		inject "ecfw1.bin" "$CONFIG_KBC1126_FW1" "raw" \
-		    "${CONFIG_KBC1126_FW1_OFFSET}" && \
-		inject "ecfw2.bin" "$CONFIG_KBC1126_FW2" "raw" \
-		    "${CONFIG_KBC1126_FW2_OFFSET}"
-	[ ! -z "${CONFIG_VGA_BIOS_FILE}" ] && \
-	    [ ! -z "${CONFIG_VGA_BIOS_ID}" ] && \
-		inject "pci${CONFIG_VGA_BIOS_ID}.rom" \
-		    "${CONFIG_VGA_BIOS_FILE}" "optionrom"
-	[ "${CONFIG_INCLUDE_SMSC_SCH5545_EC_FW}" = "y" ] && \
-	    [ ! -z "${CONFIG_SMSC_SCH5545_EC_FW_FILE}" ] && \
-		inject "sch5545_ecfw.bin" "$CONFIG_SMSC_SCH5545_EC_FW_FILE" raw
-	[ "${modifygbe}" = "true" ] && ! [ "${release}" = "y" ] && \
-		inject "IFD" "${CONFIG_GBE_BIN_PATH}" "GbE"
-
-	printf "ROM image successfully patched: %s\n" "${rom}"
-}
-
-inject()
-{
-	[ $# -lt 3 ] && \
-		err "inject $@, $rom: usage: inject name path type (offset)"
-
-	eval "$(setvars "" cbfsname _dest _t _offset)"
-	cbfsname="${1}"
-	_dest="${2##*../}"
-	_t="${3}"
-	[ $# -gt 3 ] && _offset="-b ${4}" && [ -z "${4}" ] && \
-	    err "inject $@, $rom: offset passed, but empty (not defined)"
-
-	[ -z "${_dest}" ] && err "inject $@, ${rom}: empty destination path"
-	[ ! -f "${_dest}" ] && [ "${nukemode}" != "nuke" ] && \
-		err "inject_${dl_type}: file missing, ${_dest}"
-
-	[ "$nukemode" = "nuke" ] || \
-		printf "Inserting %s/%s into file: %s\n" \
-		    "${cbfsname}" "${_t}" "$rom"
-
-	if [ "${_t}" = "GbE" ]; then
-		x_ mkdir -p tmp
-		x_ cp "${_dest}" "tmp/gbe.bin"
-		_dest="tmp/gbe.bin"
-		x_ "${nvmutil}" "${_dest}" setmac "${new_mac}"
-	fi
-	if [ "${cbfsname}" = "IFD" ]; then
-		if [ "${nukemode}" != "nuke" ]; then
-			x_ "${ifdtool}" -i ${_t}:${_dest} "${rom}" -O "$rom"
-		else
-			x_ "${ifdtool}" --nuke ${_t} "${rom}" -O "${rom}"
-		fi
-	else
-		if [ "${nukemode}" != "nuke" ]; then
-			x_ "${cbfstool}" "${rom}" add -f "${_dest}" \
-			    -n "${cbfsname}" -t ${_t} ${_offset}
-		else
-			x_ "${cbfstool}" "${rom}" remove -n "${cbfsname}"
-		fi
-
-	fi
-}
-
-usage()
-{
-	cat <<- EOF
-	USAGE: ./update vendor inject -r [rom path] -b [boardname] -m [macaddress]
-	Example: ./update vendor inject -r x230_12mb.rom -b x230_12mb
-
-	Adding a macadress to the gbe is optional.
-	If the [-m] parameter is left blank, the gbe will not be touched.
-
-	Type './update vendor inject listboards' to get a list of valid boards
-	EOF
-}
-
-main $@