1 files changed, 0 insertions, 194 deletions
diff --git a/script/roms b/script/roms
deleted file mode 100755
index 8a2cc796..00000000
--- a/script/roms
+++ /dev/null
@@ -1,194 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
-# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-
-set -u -e
-
-. "include/lib.sh"
-
-tmprom="$TMPDIR/rom"
-
-seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
-cfgsdir="config/coreboot"
-rp2040src="src/pico-serprog"
-rp2040x="$rp2040src/build/pico_serprog.uf2"
-picosdk="src/pico-sdk"
-rp2040dir="$picosdk/src/boards/include/boards"
-stm32src="src/stm32-vserprog"
-stm32x="$stm32src/stm32-vserprog.hex"
-stm32dir="$stm32src/boards"
-
-# Disable all payloads by default.
-# target.cfg files have to specifically enable [a] payload(s)
-pv="payload_uboot payload_seabios payload_memtest payload_grub"
-v="romdir initmode displaymode targetdir tree release ubootelf"
-v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv"
-eval `setvars "n" $pv`
-eval `setvars "" $v boards targets serdir ser`
-
-main()
-{
-	while [ $# -gt 0 ]; do
-		if [ "$1" = "serprog" ]; then
-			[ $# -lt 2 ] && $err "serprog type not set"
-			[ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \
-			    $err "invalid serprog type"
-			eval "x_ ./update trees -f \"\${${2}src##*/}\""
-			ser="$2" && shift 2 && continue
-		fi
-		[ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return 0
-		[ "$1" = "all" ] && shift 1 && continue
-		boards="$1 $boards"; shift 1
-	done
-
-	[ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \
-	    config/coreboot)" || $err "can't list coreboot boards"
-
-	[ -n "$ser" ] && \
-	    eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\""
-	[ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")"
-
-	for x in $boards; do
-		[ -n "$ser" ] && mkserprogfw "$ser" "$x"
-		[ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \
-		    configure_target "$x" && build_roms && \
-		    [ -d "bin/$board" ] && targets="$targets, $x" && \
-		    [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x"
-	done
-
-	[ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \
-	    mkrom_tarball "bin/serprog_$ser" && return 0
-
-	[ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled"
-	[ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }"
-	[ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser"
-	printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice"
-}
-
-mkserprogfw()
-{
-	x_ mkdir -p "bin/serprog_$1"
-	[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \
-	    -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \
-	    x_ cmake --build "$rp2040src/build"
-	[ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \
-	    BOARD=$2 && x_ make -C "$stm32src" BOARD=$2
-	eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\""
-}
-
-serlist()
-{
-	basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
-}
-
-configure_target()
-{
-	eval `setvars "n" $pv`
-	eval `setvars "" $v`
-
-	board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board"
-
-	# Override the above defaults using target.cfg
-	eval `setcfg "$targetdir/target.cfg"`
-
-	[ -z "$tree" ] && $err "$board: tree not defined"
-	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1
-	[ "$board" = "$tree" ] && return 1
-
-	x_ ./update trees -b coreboot $board
-
-	cbfstool="elf/cbfstool/$tree/cbfstool"
-	x_ ./update trees -b coreboot utils $tree
-
-	[ -n "$uboot_config" ] || uboot_config="default"
-	[ "$payload_uboot" = "y" ] || payload_seabios="y"
-	[ "$payload_grub" = "y" ] && payload_seabios="y"
-	[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
-	    $err "$board: U-Boot and SeaBIOS/GRUB are both enabled."
-
-	[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
-
-	[ -n "$grubtree" ] || grubtree="default"
-	grubelf="elf/grub/$grubtree/payload/grub.elf"
-
-	[ "$payload_memtest" = "y" ] || payload_memtest="n"
-	[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0
-}
-
-build_roms()
-{
-	x_ rm -Rf "$romdir"
-
-	for cbcfg in "$targetdir/config/"*; do
-		[ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \
-		    && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt"
-		initmode="${cn%%_*}"; chkvars initmode displaymode
-		e "$cbcfg" f not || add_payloads
-	done; x_ rm -f "$tmprom"
-}
-
-add_payloads()
-{
-	cbuild="$cbelfdir/$board/${initmode}_$displaymode"
-	[ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}"
-	x_ cp "$cbuild/coreboot.rom" "$tmprom"
-
-	[ "$payload_seabios" = "y" ] && add_seabios_payload
-	[ "$payload_uboot" = "y" ] || return 0
-
-	# add u-boot payload
-	x_ ./update trees -b u-boot $board
-	ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \
-	    && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot"
-	[ -f "$ubootelf" ] || $err "$board: Can't find u-boot"
-
-	cbfs "$tmprom" "$ubootelf" "fallback/payload"
-	cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
-}
-
-add_seabios_payload()
-{
-	_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
-	x_ ./update trees -b seabios
-
-	pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub"
-	newrom="$romdir/${pstr}_${board}_$initmode.rom"
-	[ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom"
-
-	cbfs "$tmprom" "$_seabioself" "fallback/payload"
-	x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
-
-	z="2"; [ "$initmode" = "vgarom" ] && z="0"
-	x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
-	x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
-	[ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \
-	    vgaroms/seavgabios.bin raw
-
-	if [ "$payload_grub" = "y" ]; then
-		x_ ./update trees -b grub $grubtree
-		cbfs "$tmprom" "$grubelf" "img/grub2"
-		printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
-		    > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk"
-		cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
-	fi
-
-	[ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus && \
-	    cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest
-
-	cprom "$newrom" && [ "$payload_grub" = "y" ] && \
-	    cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \
-	    cprom "${newrom%.rom}_grubfirst.rom"; return 0
-}
-
-cprom()
-{
-	x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1"
-	[ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \
-	    x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0
-}
-
-main $@