summaryrefslogtreecommitdiff
path: root/resources/scripts/update/blobs/inject
diff options
context:
space:
mode:
Diffstat (limited to 'resources/scripts/update/blobs/inject')
-rwxr-xr-xresources/scripts/update/blobs/inject389
1 files changed, 0 insertions, 389 deletions
diff --git a/resources/scripts/update/blobs/inject b/resources/scripts/update/blobs/inject
deleted file mode 100755
index 891cb198..00000000
--- a/resources/scripts/update/blobs/inject
+++ /dev/null
@@ -1,389 +0,0 @@
-#!/usr/bin/env sh
-
-# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2023 Leah Rowe <info@minifree.org>
-# SPDX-License-Identifier: GPL-3.0-only
-
-sname=""
-archive=""
-_filetype=""
-rom=""
-board=""
-modifygbe=""
-new_mac=""
-release=""
-releasearchive=""
-
-cbdir="coreboot/default"
-cbcfgsdir="resources/coreboot"
-ifdtool="cbutils/default/ifdtool"
-cbfstool="cbutils/default/cbfstool"
-nvmutil="util/nvmutil/nvm"
-boarddir=""
-pciromsdir="pciroms"
-
-CONFIG_HAVE_MRC=""
-CONFIG_HAVE_ME_BIN=""
-CONFIG_ME_BIN_PATH=""
-CONFIG_KBC1126_FIRMWARE=""
-CONFIG_KBC1126_FW1=""
-CONFIG_KBC1126_FW1_OFFSET=""
-CONFIG_KBC1126_FW2=""
-CONFIG_KBC1126_FW2_OFFSET=""
-CONFIG_VGA_BIOS_FILE=""
-CONFIG_VGA_BIOS_ID=""
-CONFIG_GBE_BIN_PATH=""
-
-main()
-{
- sname="${0}"
-
- if [ $# -lt 1 ]; then
- fail "No options specified."
- elif [ "${1}" = "listboards" ]; then
- listboards
- exit 0
- fi
-
- archive="${1}"
-
- while getopts r:b:m: option
- do
- case "${option}"
- in
- r)rom=${OPTARG};;
- b)board=${OPTARG};;
- m)
- modifygbe=true
- new_mac=${OPTARG}
- ;;
- esac
- done
-
- check_board
- build_dependencies
- inject_blobs
-}
-
-check_board()
-{
- if ! check_release ${archive} ; then
- if [ ! -f "${rom}" ]; then
- fail "${rom} is not a valid path"
- elif [ -z ${rom+x} ]; then
- fail 'no rom specified'
- elif [ -z ${board+x} ]; then
- board=$(detect_board ${rom}) \
- || fail 'no board specified'
- fi
- else
- release=true
- releasearchive="${archive}"
- board=$(detect_board ${archive}) \
- || fail 'Could not detect board type'
- fi
-
- boarddir="${cbcfgsdir}/${board}"
- if [ ! -d "${boarddir}" ]; then
- fail "board ${board} not found"
- fi
-}
-
-check_release()
-{
- if [ ! -f "${archive}" ]; then
- return 1
- fi
-
- if [ "${archive##*.}" = "xz" ]; then
- printf "%s\n" "Release archive ${archive} detected"
- return 0
- else
- return 1
- fi
-}
-
-# This function tries to determine the board from the filename of the rom.
-# It will only succeed if the filename is not changed from the build/download
-detect_board()
-{
- path=${1}
- filename=$(basename ${path})
- case ${filename} in
- grub_*)
- board=$(echo "${filename}" | cut -d '_' -f2-3)
- ;;
- seabios_withgrub_*)
- board=$(echo "${filename}" | cut -d '_' -f3-4)
- ;;
- *.tar.xz)
- _stripped_prefix=${filename#*_}
- board="${_stripped_prefix%.tar.xz}"
- ;;
- *)
- return 1
- esac
-
- if [ -d "${boarddir}/" ]; then
- printf '%s\n' "${board}"
- return 0
- else
- return 1
- fi
-}
-
-build_dependencies()
-{
- if [ ! -d ${cbdir} ]; then
- printf "downloading coreboot\n"
- ./download coreboot default
- fi
-
- ./build module cbutils default || fail "could not build cbutils"
-
- ./blobutil download ${board} || \
- fail "Could not download blobs for ${board}"
-}
-
-inject_blobs()
-{
- if [ "${release}" = "true" ]; then
- echo 'patching release file'
- patch_release_roms
- else
- patch_rom ${rom}
- fi
-}
-
-patch_release_roms()
-{
- _tmpdir=$(mktemp -d "/tmp/${board}_tmpXXXX")
- tar xf "${releasearchive}" -C "${_tmpdir}" || \
- fail 'could not extract release archive'
-
- for x in ${_tmpdir}/bin/*/*.rom ; do
- echo "patching rom $x"
- patch_rom ${x} || fail "could not patch ${x}"
- done
-
- (
- cd ${_tmpdir}/bin/*
- sha1sum --status -c blobhashes || \
- fail 'ROMs did not match expected hashes'
- )
-
- if [ "${modifygbe}" = "true" ]; then
- for x in ${_tmpdir}/bin/*/*.rom ; do
- modify_gbe ${x}
- done
- fi
-
- if ! [ -d bin/release ]; then
- mkdir -p bin/release
- fi
-
- mv ${_tmpdir}/bin/* bin/release/ && \
- printf '%s\n' 'Success! Your ROMs are in bin/release'
-
- rm -r "${_tmpdir}"
-}
-
-patch_rom()
-{
- rom="${1}"
-
- set -- "${boarddir}/config/"*
- . ${1} 2>/dev/null
- . "${boarddir}/board.cfg"
-
- if [ "$CONFIG_HAVE_MRC" = "y" ]; then
- inject_blob_intel_mrc "${rom}"
- fi
-
- if [ "${CONFIG_HAVE_ME_BIN}" = "y" ]; then
- inject_blob_intel_me "${rom}"
- fi
-
- if [ "${CONFIG_KBC1126_FIRMWARE}" = "y" ]; then
- inject_blob_hp_kbc1126_ec "${rom}"
- fi
-
- if [ "${CONFIG_VGA_BIOS_FILE}" != "" ] \
- && [ "${CONFIG_VGA_BIOS_ID}" != "" ]; then
- inject_blob_dell_e6400_vgarom_nvidia
- fi
-
- if [ "${modifygbe}" = "true" ] && ! [ "${release}" = "true" ]; then
- modify_gbe ${rom}
- fi
-}
-
-inject_blob_intel_mrc()
-{
- rom="${1}"
-
- printf 'adding mrc\n'
-
- # mrc.bin must be inserted at a specific offset. the only
- # libreboot platform that needs it, at present, is haswell
-
- # in cbfstool, -b values above 0x80000000 are interpreted as
- # top-aligned x86 memory locations. this is converted into an
- # absolute offset within the flash, and inserted accordingly
- # at that offset into the ROM image file
-
- # coreboot's own build system hardcodes the mrc.bin offset
- # because there is only one correct location in memory, but
- # it would be useful for lbmk if it could be easily scanned
- # from Kconfig, with the option to change it where in practise
- # it is not changed
-
- # the hardcoded offset below is based upon reading of the coreboot
- # source code, and it is *always* correct for haswell platform.
- # TODO: this logic should be tweaked to handle more platforms
-
- ${cbfstool} ${rom} add -f mrc/haswell/mrc.bin -n mrc.bin -t mrc \
- -b 0xfffa0000 || exit 1
-}
-
-inject_blob_intel_me()
-{
- printf 'adding intel management engine\n'
-
- rom="${1}"
-
- if [ -z ${CONFIG_ME_BIN_PATH} ]; then
- fail "CONFIG_ME_BIN_PATH not set"
- fi
-
- _me_location=${CONFIG_ME_BIN_PATH#../../}
-
- if [ ! -f "${_me_location}" ]; then
- fail "CONFIG_ME_BIN_PATH points to missing file"
- fi
-
- ${ifdtool} -i me:${_me_location} ${rom} -O ${rom} || exit 1
-}
-
-inject_blob_hp_kbc1126_ec()
-{
- rom="${1}"
-
- _ec1_location="${CONFIG_KBC1126_FW1#../../}"
- _ec1_offset="${CONFIG_KBC1126_FW1_OFFSET}"
- _ec2_location="${CONFIG_KBC1126_FW2#../../}"
- _ec2_offset="${CONFIG_KBC1126_FW2_OFFSET}"
-
- printf "adding hp kbc1126 ec firmware\n"
-
- if [ "${_ec1_offset}" = "" ] || [ "${_ec1_offset}" = "" ]; then
- printf "EC offsets not declared for board: %s\n" \
- "${board}"
- exit 1
- fi
- if [ "${_ec1_location}" = "" ] || [ "${_ec2_location}" = "" ]; then
- printf "EC firmware path not declared for board: %s\n" \
- "${board}"
- fi
- if [ ! -f "${_ec1_location}" ] || [ ! -f "${_ec2_location}" ]; then
- printf "EC firmware not downloaded for board: %s\n" \
- "${board}"
- exit 1
- fi
-
- ${cbfstool} "${rom}" add -f ${_ec1_location} -n ecfw1.bin \
- -b ${_ec1_offset} -t raw || exit 1
- ${cbfstool} "${rom}" add -f ${_ec2_location} -n ecfw2.bin \
- -b ${_ec2_offset} -t raw || exit 1
-}
-
-inject_blob_dell_e6400_vgarom_nvidia()
-{
- rom="${1}"
-
- _vga_location="${CONFIG_VGA_BIOS_FILE#../../}"
- _vga_dir="${_vga_location%/*}"
- _vga_filename="${_vga_location##*/}"
-
- printf "adding pci option rom\n"
-
- if [ "${_vga_dir}" != "${pciromsdir}" ]; then
- printf "Invalid PCI ROM directory: %s\n" ${_vga_dir}
- exit 1
- fi
- if [ ! -f "${_vga_location}" ]; then
- printf "No such file exists: %s\n" ${_vga_location}
- exit 1
- fi
-
- ${cbfstool} ${rom} add -f "${_vga_location}" \
- -n "pci${CONFIG_VGA_BIOS_ID}.rom" \
- -t optionrom || exit 1
-}
-
-modify_gbe()
-{
- printf "changing mac address in gbe to ${new_mac}\n"
-
- rom=${1}
-
- if [ -z ${CONFIG_GBE_BIN_PATH} ]; then
- fail "CONFIG_GBE_BIN_PATH not set"
- fi
-
- _gbe_location=${CONFIG_GBE_BIN_PATH#../../}
-
- if [ ! -f "${_gbe_location}" ]; then
- fail "CONFIG_GBE_BIN_PATH points to missing file"
- fi
-
- if [ ! -f ${nvmutil} ]; then
- make -C util/nvmutil || fail 'failed to build nvmutil'
- fi
-
- _gbe_tmp=$(mktemp -t gbeXXXX.bin)
- cp ${_gbe_location} ${_gbe_tmp}
- ${nvmutil} "${_gbe_tmp}" setmac ${new_mac} \
- || fail 'failed to modify mac address'
-
- ${ifdtool} -i GbE:${_gbe_tmp} "${rom}" \
- -O "${rom}" || exit 1
-
- rm -f ${_gbe_tmp}
-}
-
-listboards()
-{
- for boarddir in ${cbcfgsdir}/*; do
- if [ ! -d "${boarddir}" ]; then continue; fi
- board="${boarddir##${cbcfgsdir}/}"
- board="${board%/}"
- printf '%s\n' "${board##*/}"
- done
-}
-
-fail()
-{
- if [ ! -z ${@+x} ]; then
- printf "\n%s: ERROR: ${@}\n" ${sname}
- fi
-
- usage
- exit 1
-}
-
-usage()
-{
- cat <<- EOF
- USAGE: ./blobutil inject -r [rom path] -b [boardname] -m [macaddress]
- Example: ./blobutil inject -r x230_12mb.rom -b x230_12mb
-
- Adding a macadress to the gbe is optional.
- If the [-m] parameter is left blank, the gbe will not be touched.
-
- Type './blobutil inject listboards' to get a list of valid boards
- EOF
-}
-
-main $@