1 files changed, 0 insertions, 389 deletions
diff --git a/resources/scripts/update/blobs/inject b/resources/scripts/update/blobs/inject
deleted file mode 100755
index 891cb198..00000000
--- a/resources/scripts/update/blobs/inject
+++ /dev/null
@@ -1,389 +0,0 @@
-#!/usr/bin/env sh
-
-# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2023 Leah Rowe <info@minifree.org>
-# SPDX-License-Identifier: GPL-3.0-only
-
-sname=""
-archive=""
-_filetype=""
-rom=""
-board=""
-modifygbe=""
-new_mac=""
-release=""
-releasearchive=""
-
-cbdir="coreboot/default"
-cbcfgsdir="resources/coreboot"
-ifdtool="cbutils/default/ifdtool"
-cbfstool="cbutils/default/cbfstool"
-nvmutil="util/nvmutil/nvm"
-boarddir=""
-pciromsdir="pciroms"
-
-CONFIG_HAVE_MRC=""
-CONFIG_HAVE_ME_BIN=""
-CONFIG_ME_BIN_PATH=""
-CONFIG_KBC1126_FIRMWARE=""
-CONFIG_KBC1126_FW1=""
-CONFIG_KBC1126_FW1_OFFSET=""
-CONFIG_KBC1126_FW2=""
-CONFIG_KBC1126_FW2_OFFSET=""
-CONFIG_VGA_BIOS_FILE=""
-CONFIG_VGA_BIOS_ID=""
-CONFIG_GBE_BIN_PATH=""
-
-main()
-{
-	sname="${0}"
-
-	if [ $# -lt 1 ]; then
-		fail "No options specified."
-	elif [ "${1}" = "listboards" ]; then
-		listboards
-		exit 0
-	fi
-
-	archive="${1}"
-
-	while getopts r:b:m: option
-	do
-	    case "${option}"
-		in
-		r)rom=${OPTARG};;
-		b)board=${OPTARG};;
-		m)
-			modifygbe=true
-			new_mac=${OPTARG}
-			;;
-	    esac
-	done
-
-	check_board
-	build_dependencies
-	inject_blobs
-}
-
-check_board()
-{
-	if ! check_release ${archive} ; then
-		if [ ! -f "${rom}" ]; then
-			fail "${rom} is not a valid path"
-		elif [ -z ${rom+x} ]; then
-			fail 'no rom specified'
-		elif [ -z ${board+x} ]; then
-			board=$(detect_board ${rom}) \
-					|| fail 'no board specified'
-		fi
-	else
-		release=true
-		releasearchive="${archive}"
-		board=$(detect_board ${archive}) \
-				|| fail 'Could not detect board type'
-	fi
-
-	boarddir="${cbcfgsdir}/${board}"
-	if [ ! -d "${boarddir}" ]; then
-		fail "board ${board} not found"
-	fi
-}
-
-check_release()
-{
-	if [ ! -f "${archive}" ]; then
-		return 1
-	fi
-
-	if [ "${archive##*.}" = "xz" ]; then
-		printf "%s\n" "Release archive ${archive} detected"
-		return 0
-	else
-		return 1
-	fi
-}
-
-# This function tries to determine the board from the filename of the rom.
-# It will only succeed if the filename is not changed from the build/download
-detect_board()
-{
-	path=${1}
-	filename=$(basename ${path})
-	case ${filename} in
-		grub_*)
-		board=$(echo "${filename}" | cut -d '_' -f2-3)
-		;;
-		seabios_withgrub_*)
-		board=$(echo "${filename}" | cut -d '_' -f3-4)
-		;;
-		*.tar.xz)
-		_stripped_prefix=${filename#*_}
-		board="${_stripped_prefix%.tar.xz}"
-		;;
-		*)
-		return 1
-	esac	
-
-	if [ -d "${boarddir}/" ]; then
-		printf '%s\n' "${board}"
-		return 0
-	else
-		return 1
-	fi
-}
-
-build_dependencies()
-{
-	if [ ! -d ${cbdir} ]; then
-		printf "downloading coreboot\n"
-		./download coreboot default
-	fi
-
-	./build module cbutils default || fail "could not build cbutils"
-
-	./blobutil download ${board} || \
-			fail "Could not download blobs for ${board}"
-}
-
-inject_blobs()
-{
-	if [ "${release}" = "true" ]; then
-		echo 'patching release file'
-		patch_release_roms
-	else
-		patch_rom ${rom}
-	fi
-}
-
-patch_release_roms()
-{
-	_tmpdir=$(mktemp -d "/tmp/${board}_tmpXXXX")
-	tar xf "${releasearchive}" -C "${_tmpdir}" || \
-	fail 'could not extract release archive'
-
-	for x in ${_tmpdir}/bin/*/*.rom ; do
-		echo "patching rom $x"
-		patch_rom ${x} || fail "could not patch ${x}"
-	done
-
-	(
-	cd ${_tmpdir}/bin/*
-	sha1sum --status -c blobhashes || \
-	fail 'ROMs did not match expected hashes'
-	)
-
-	if [ "${modifygbe}" = "true" ]; then
-		for x in ${_tmpdir}/bin/*/*.rom ; do
-			modify_gbe ${x}
-		done
-	fi
-
-	if ! [ -d bin/release ]; then
-		mkdir -p bin/release
-	fi
-
-	mv ${_tmpdir}/bin/* bin/release/ && \
-	printf '%s\n' 'Success! Your ROMs are in bin/release'
-
-	rm -r "${_tmpdir}"
-}
-
-patch_rom()
-{
-	rom="${1}"
-
-	set -- "${boarddir}/config/"*
-	. ${1} 2>/dev/null
-	. "${boarddir}/board.cfg"
-
-	if [ "$CONFIG_HAVE_MRC" = "y" ]; then
-		inject_blob_intel_mrc "${rom}"
-	fi
-
-	if [ "${CONFIG_HAVE_ME_BIN}" = "y" ]; then
-		inject_blob_intel_me "${rom}"
-	fi
-
-	if [ "${CONFIG_KBC1126_FIRMWARE}" = "y" ]; then
-		inject_blob_hp_kbc1126_ec "${rom}"
-	fi
-
-	if [ "${CONFIG_VGA_BIOS_FILE}" != "" ] \
-				&& [ "${CONFIG_VGA_BIOS_ID}" != "" ]; then
-		inject_blob_dell_e6400_vgarom_nvidia
-	fi
-
-	if [ "${modifygbe}" = "true" ] && ! [ "${release}" = "true" ]; then
-		modify_gbe ${rom}
-	fi
-}
-
-inject_blob_intel_mrc()
-{
-	rom="${1}"
-
-	printf 'adding mrc\n'
-
-	# mrc.bin must be inserted at a specific offset. the only
-	# libreboot platform that needs it, at present, is haswell
-
-	# in cbfstool, -b values above 0x80000000 are interpreted as
-	# top-aligned x86 memory locations. this is converted into an
-	# absolute offset within the flash, and inserted accordingly
-	# at that offset into the ROM image file
-
-	# coreboot's own build system hardcodes the mrc.bin offset
-	# because there is only one correct location in memory, but
-	# it would be useful for lbmk if it could be easily scanned
-	# from Kconfig, with the option to change it where in practise
-	# it is not changed
-
-	# the hardcoded offset below is based upon reading of the coreboot
-	# source code, and it is *always* correct for haswell platform.
-	# TODO: this logic should be tweaked to handle more platforms
-
-	${cbfstool} ${rom} add -f mrc/haswell/mrc.bin -n mrc.bin -t mrc \
-		-b 0xfffa0000 || exit 1
-}
-
-inject_blob_intel_me()
-{
-	printf 'adding intel management engine\n'
-
-	rom="${1}"
-
-	if [ -z ${CONFIG_ME_BIN_PATH} ]; then
-		fail "CONFIG_ME_BIN_PATH not set"
-	fi
-
-	_me_location=${CONFIG_ME_BIN_PATH#../../}
-
-	if [ ! -f "${_me_location}" ]; then
-		fail "CONFIG_ME_BIN_PATH points to missing file"
-	fi
-
-	${ifdtool} -i me:${_me_location} ${rom} -O ${rom} || exit 1
-}
-
-inject_blob_hp_kbc1126_ec()
-{
-	rom="${1}"
-
-	_ec1_location="${CONFIG_KBC1126_FW1#../../}"
-	_ec1_offset="${CONFIG_KBC1126_FW1_OFFSET}"
-	_ec2_location="${CONFIG_KBC1126_FW2#../../}"
-	_ec2_offset="${CONFIG_KBC1126_FW2_OFFSET}"
-
-	printf "adding hp kbc1126 ec firmware\n"
-
-	if [ "${_ec1_offset}" = "" ] || [ "${_ec1_offset}" = "" ]; then
-		printf "EC offsets not declared for board: %s\n" \
-				"${board}"
-		exit 1
-	fi
-	if [ "${_ec1_location}" = "" ] || [ "${_ec2_location}" = "" ]; then
-		printf "EC firmware path not declared for board: %s\n" \
-				"${board}"
-	fi
-	if [ ! -f "${_ec1_location}" ] || [ ! -f "${_ec2_location}" ]; then
-		printf "EC firmware not downloaded for board: %s\n" \
-				"${board}"
-		exit 1
-	fi
-
-	${cbfstool} "${rom}" add -f ${_ec1_location} -n ecfw1.bin \
-			-b ${_ec1_offset} -t raw || exit 1
-	${cbfstool} "${rom}" add -f ${_ec2_location} -n ecfw2.bin \
-			-b ${_ec2_offset} -t raw || exit 1
-}
-
-inject_blob_dell_e6400_vgarom_nvidia()
-{
-	rom="${1}"
-
-	_vga_location="${CONFIG_VGA_BIOS_FILE#../../}"
-	_vga_dir="${_vga_location%/*}"
-	_vga_filename="${_vga_location##*/}"
-
-	printf "adding pci option rom\n"
-
-	if [ "${_vga_dir}" != "${pciromsdir}" ]; then
-		printf "Invalid PCI ROM directory: %s\n" ${_vga_dir}
-		exit 1
-	fi
-	if [ ! -f "${_vga_location}" ]; then
-		printf "No such file exists: %s\n" ${_vga_location}
-		exit 1
-	fi
-
-	${cbfstool} ${rom} add -f "${_vga_location}" \
-		-n "pci${CONFIG_VGA_BIOS_ID}.rom" \
-		-t optionrom || exit 1
-}
-
-modify_gbe()
-{
-	printf "changing mac address in gbe to ${new_mac}\n"
-
-	rom=${1}
-
-	if [ -z ${CONFIG_GBE_BIN_PATH} ]; then
-		fail "CONFIG_GBE_BIN_PATH not set"
-	fi
-
-	_gbe_location=${CONFIG_GBE_BIN_PATH#../../}
-
-	if [ ! -f "${_gbe_location}" ]; then
-		fail "CONFIG_GBE_BIN_PATH points to missing file"
-	fi
-
-	if [ ! -f ${nvmutil} ]; then
-		make -C util/nvmutil || fail 'failed to build nvmutil'
-	fi
-
-	_gbe_tmp=$(mktemp -t gbeXXXX.bin)
-	cp ${_gbe_location} ${_gbe_tmp}
-	${nvmutil} "${_gbe_tmp}" setmac ${new_mac} \
-			|| fail 'failed to modify mac address'
-
-	${ifdtool} -i GbE:${_gbe_tmp} "${rom}" \
-			-O "${rom}" || exit 1
-
-	rm -f ${_gbe_tmp}
-}
-
-listboards()
-{
-	for boarddir in ${cbcfgsdir}/*; do
-		if [ ! -d "${boarddir}" ]; then continue; fi
-		board="${boarddir##${cbcfgsdir}/}"
-		board="${board%/}"
-		printf '%s\n' "${board##*/}"
-	done
-}
-
-fail()
-{
-	if [ ! -z ${@+x} ]; then
-		printf "\n%s: ERROR: ${@}\n" ${sname}
-	fi
-
-	usage
-	exit 1
-}
-
-usage()
-{
-	cat <<- EOF
-	USAGE: ./blobutil inject -r [rom path] -b [boardname] -m [macaddress]
-	Example: ./blobutil inject -r x230_12mb.rom -b x230_12mb
-
-	Adding a macadress to the gbe is optional.
-	If the [-m] parameter is left blank, the gbe will not be touched.
-
-	Type './blobutil inject listboards' to get a list of valid boards
-	EOF
-}
-
-main $@