summaryrefslogtreecommitdiff
path: root/resources/scripts/build
diff options
context:
space:
mode:
Diffstat (limited to 'resources/scripts/build')
-rwxr-xr-xresources/scripts/build/boot/roms_helper106
1 files changed, 50 insertions, 56 deletions
diff --git a/resources/scripts/build/boot/roms_helper b/resources/scripts/build/boot/roms_helper
index 90cde2ed..92799801 100755
--- a/resources/scripts/build/boot/roms_helper
+++ b/resources/scripts/build/boot/roms_helper
@@ -86,14 +86,14 @@ uboot_config="undefined"
if [ "${grub_scan_disk}" = "undefined" ]; then
printf "build/roms: Target '%s' does not define grub_scan_disk. " \
- ${board}
+ ${board}
printf "Defaulting to 'both'.\n"
grub_scan_disk="both"
fi
if [ "${grub_scan_disk}" != "both" ] && \
- [ "${grub_scan_disk}" != "ata" ] && \
- [ "${grub_scan_disk}" != "ahci" ]; then
+ [ "${grub_scan_disk}" != "ata" ] && \
+ [ "${grub_scan_disk}" != "ahci" ]; then
printf "build/roms: Target '%s' defines bad grub_scan_disk option. " \
${board}
printf "Defaulting to 'both'.\n"
@@ -266,7 +266,6 @@ if [ "${payload_grub}" = "y" ] \
rm -Rf payload/grub/ # just in case
fi
for keymapfile in ${kmapdir}/*; do
-
if [ ! -f "${keymapfile}" ]; then
continue
fi
@@ -305,19 +304,20 @@ fi
# it is assumed that no other work will be done on the ROM
# after calling this function. therefore this function is "final"
-moverom() {
+moverom()
+{
rompath="$1"
- newrompath="$2"
+ _newrom="$2"
cuttype="$3"
- printf "\nCreating new ROM image: %s\n" "${newrompath}"
+ printf "\nCreating new ROM image: %s\n" "${_newrom}"
if [ "${cuttype}" = "4MiB IFD BIOS region" ]; then
- dd if=${rompath} of=${newrompath} bs=1 \
+ dd if=${rompath} of=${_newrom} bs=1 \
skip=$(($(stat -c %s ${rompath}) - 0x400000)) \
count=4194304
else
- cp ${rompath} ${newrompath}
+ cp ${rompath} ${_newrom}
fi
for romsize in 4 8 16; do
@@ -326,7 +326,7 @@ moverom() {
if [ ! -f "${ifdgbe}" ]; then
./build descriptors ich9m
fi
- dd if=${ifdgbe} of=${newrompath} bs=1 count=12k \
+ dd if=${ifdgbe} of=${_newrom} bs=1 count=12k \
conv=notrunc
fi
cmpstr="${romsize}MiB ICH9 IFD NOGBE NOR flash"
@@ -335,24 +335,25 @@ moverom() {
if [ ! -f "${ifdgbe}" ]; then
./build descriptors ich9m
fi
- dd if=${ifdgbe} of=${newrompath} bs=1 count=4k \
+ dd if=${ifdgbe} of=${_newrom} bs=1 count=4k \
conv=notrunc
fi
done
if [ "${cuttype}" = "i945 laptop" ]; then
- dd if=${newrompath} of=top64k.bin bs=1 \
- skip=$(($(stat -c %s ${newrompath}) - 0x10000)) \
- count=64k
- dd if=top64k.bin of=${newrompath} bs=1 \
- seek=$(($(stat -c %s ${newrompath}) - 0x20000)) \
- count=64k conv=notrunc
+ dd if=${_newrom} of=top64k.bin bs=1 \
+ skip=$(($(stat -c %s ${_newrom}) - 0x10000)) \
+ count=64k
+ dd if=top64k.bin of=${_newrom} bs=1 \
+ seek=$(($(stat -c %s ${_newrom}) - 0x20000)) \
+ count=64k conv=notrunc
rm -f top64k.bin
fi
}
# expected: configs must not specify a payload
-mkCoreboot() {
+mkCoreboot()
+{
cbdir="${1}" # eg. coreboot/default
cbcfgpath="${2}" # eg. resources/coreboot/e6400nvidia_4mb/config/normal
if [ ! -f "${cbcfgpath}" ]; then
@@ -385,7 +386,8 @@ mkCoreboot() {
}
# make a rom in /tmp/ and then print the path of that ROM
-mkSeabiosRom() {
+mkSeabiosRom()
+{
target_cbrom="${1}" # rom to insert seabios in. will not be touched
# (a tmpfile will be made instead)
target_seabios_cbfs_path="${2}" # e.g. fallback/payload
@@ -401,24 +403,22 @@ mkSeabiosRom() {
"${cbfstool}" "${tmprom}" add-payload -f "${target_seabioself}" \
-n ${target_seabios_cbfs_path} -c lzma || exit 1
-
"${cbfstool}" "${tmprom}" add-int -i 3000 -n etc/ps2-keyboard-spinup \
|| exit 1
if [ "${target_initmode}" = "normal" ] \
|| [ "${target_initmode}" = "libgfxinit" ]; then
"${cbfstool}" "${tmprom}" add-int -i 2 \
- -n etc/pci-optionrom-exec || exit 1
+ -n etc/pci-optionrom-exec || exit 1
elif [ "${target_initmode}" = "vgarom" ]; then # coreboot executes it
"${cbfstool}" "${tmprom}" add-int -i 0 \
- -n etc/pci-optionrom-exec || exit 1
+ -n etc/pci-optionrom-exec || exit 1
fi # for undefined modes, don't add this integer. use SeaBIOS defaults
"${cbfstool}" "${tmprom}" add-int -i 0 -n etc/optionroms-checksum \
- || exit 1
-
+ || exit 1
"${cbfstool}" "${tmprom}" add-int -i ${target_opromloadonly} \
- -n etc/only-load-option-roms || exit 1
+ -n etc/only-load-option-roms || exit 1
if [ "${target_initmode}" = "libgfxinit" ]; then
"${cbfstool}" "${tmprom}" add -f "${target_seavgabios_rom}" \
@@ -429,7 +429,8 @@ mkSeabiosRom() {
}
# make a rom in /tmp/ and then print the path of that ROM
-mkUbootRom() {
+mkUbootRom()
+{
target_cbrom="${1}" # rom to insert u-boot in. it won't be touched
# (a tmpfile will be made instead)
target_uboot_cbfs_path="${2}" # e.g. fallback/payload
@@ -458,7 +459,8 @@ mkUbootRom() {
}
# make a rom in /tmp/ and then print the path of that ROM
-mkGrubRom() {
+mkGrubRom()
+{
target_keymap="${1}"
target_cbrom="${2}"
target_grubelf_cbfs_path="${3}" # e.g. fallback/payload
@@ -496,7 +498,6 @@ mkGrubRom() {
"${cbfstool}" "${tmprom}" add -f "${tmpgrubcfg}" -n grub.cfg -t raw \
|| exit 1
-
"${cbfstool}" "${tmprom}" add -f "${tmpgrubtestcfg}" -n grubtest.cfg \
-t raw || exit 1
rm -f "${tmpgrubcfg}" "${tmpgrubtestcfg}"
@@ -514,7 +515,8 @@ mkGrubRom() {
}
# Make separate ROM images with GRUB payload, for each supported keymap
-mkRomsWithGrub() {
+mkRomsWithGrub()
+{
tmprompath="${1}"
initmode="${2}"
displaymode="${3}"
@@ -524,19 +526,18 @@ mkRomsWithGrub() {
y=${seabios_opromloadonly}
z=${initmode}
if [ "${payload_grub_withseabios}" = "y" ] \
- && [ "${firstpayloadname}" = "grub" ]; then
+ && [ "${firstpayloadname}" = "grub" ]; then
mv "$(mkSeabiosRom "${x}" "seabios.elf" "${y}" "${z}")" \
"${tmprompath}"
elif [ "${payload_seabios_withgrub}" ] \
- && [ "${firstpayloadname}" != "grub" ]; then
+ && [ "${firstpayloadname}" != "grub" ]; then
mv "$(mkSeabiosRom "${x}" "fallback/payload" "$y" "$z")" \
"${tmprompath}"
fi
keymaps=""
if [ -z ${keyboard_layouts} ]; then
- for kmapfile in "${kmapdir}"/*
- do
+ for kmapfile in "${kmapdir}"/*; do
keymaps="${keymaps} ${kmapfile}"
done
else
@@ -545,8 +546,6 @@ mkRomsWithGrub() {
done
fi
for keymapfile in ${keymaps}; do
- echo "keymaps is $keymaps, keymapfile is $keymapfile"
-
if [ ! -f "${keymapfile}" ]; then
continue
fi
@@ -563,24 +562,22 @@ mkRomsWithGrub() {
x=${keymap}
y=${tmprompath}
z=${grub_path_in_cbfs}
-
tmpgrubrom="$(mkGrubRom "${x}" "${y}" "${z}")"
+ _newrom="${romdir}/${firstpayloadname}_${board}_${initmode}_"
if [ "${initmode}" = "normal" ]; then
- newrompath="${romdir}/${firstpayloadname}_${board}_"
- newrompath="${newrompath}${initmode}_${keymap}.rom"
+ _newrom="${_newrom}${keymap}.rom"
else
- newrompath="${romdir}/${firstpayloadname}_${board}_"
- newrompath="${newrompath}${initmode}_${displaymode}_"
- newrompath="${newrompath}${keymap}.rom"
+ _newrom="${_newrom}${displaymode}_${keymap}.rom"
fi
- moverom "${tmpgrubrom}" "${newrompath}" "${romtype}"
+ moverom "${tmpgrubrom}" "${_newrom}" "${romtype}"
rm -f "${tmpgrubrom}"
done
}
# Main ROM building function. This calls all other functions
-mkRoms() {
+mkRoms()
+{
cbcfgpath="${1}"
displaymode="${2}"
initmode="${3}"
@@ -607,16 +604,13 @@ mkRoms() {
y=${seabios_opromloadonly}
z=${initmode}
t=$(mkSeabiosRom "$x" "fallback/payload" "$y" "$z")
- if [ "${initmode}" = "normal" ]; then
- newrompath="${romdir}/seabios_${board}_"
- newrompath="${newrompath}${initmode}.rom"
- else
- newrompath="${romdir}/seabios_${board}_"
- newrompath="${newrompath}${initmode}_"
- newrompath="${newrompath}${displaymode}.rom"
+
+ _newrom="${romdir}/seabios_${board}_${initmode}.rom"
+ if [ "${initmode}" != "normal" ]; then
+ _newrom="${_newrom%.rom}_${displaymode}.rom"
fi
- moverom "${t}" "${newrompath}" "${romtype}"
+ moverom "${t}" "${_newrom}" "${romtype}"
rm -f "${t}"
else
tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
@@ -638,13 +632,13 @@ mkRoms() {
z=${cbfstool}
tmpubootrom="$(mkUbootRom "$x" "fallback/payload" "$y" "$z")"
if [ "${initmode}" = "normal" ]; then
- newrompath="${romdir}/uboot_payload_${board}_"
- newrompath="${newrompath}${initmode}.rom"
+ _newrom="${romdir}/uboot_payload_${board}_"
+ _newrom="${_newrom}${initmode}.rom"
else
- newrompath="${romdir}/uboot_payload_${board}_"
- newrompath="${newrompath}${initmode}_${displaymode}.rom"
+ _newrom="${romdir}/uboot_payload_${board}_"
+ _newrom="${_newrom}${initmode}_${displaymode}.rom"
fi
- moverom "${tmpubootrom}" "${newrompath}" "${romtype}"
+ moverom "${tmpubootrom}" "${_newrom}" "${romtype}"
rm -f "${tmpubootrom}"
fi
}