summaryrefslogtreecommitdiff
path: root/config/coreboot/haswell
diff options
context:
space:
mode:
Diffstat (limited to 'config/coreboot/haswell')
-rw-r--r--config/coreboot/haswell/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch292
-rw-r--r--config/coreboot/haswell/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch29
-rw-r--r--config/coreboot/haswell/patches/0023-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch594
-rw-r--r--config/coreboot/haswell/patches/0024-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch51
4 files changed, 966 insertions, 0 deletions
diff --git a/config/coreboot/haswell/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch b/config/coreboot/haswell/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch
new file mode 100644
index 00000000..81b8e839
--- /dev/null
+++ b/config/coreboot/haswell/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch
@@ -0,0 +1,292 @@
+From d97b865a2210e70583e8bf5ee3a73d3c131b29c1 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <info@minifree.org>
+Date: Sat, 2 Mar 2024 22:51:09 +0000
+Subject: [PATCH 1/4] nb/intel/haswell: make IOMMU a runtime option
+
+When I tested graphics cards on a coreboot port for Dell
+OptiPlex 9020 SFF, I could not use a graphics card unless
+I set iommu=off on the Linux cmdline.
+
+Coreboot's current behaviour is to check whether the CPU
+has vt-d support and, if it does, initialise the IOMMU.
+
+This patch maintains the current behaviour by default, but
+allows the user to turn *off* the IOMMU, even if vt-d is
+supported by the host CPU.
+
+If iommu=Disable is specified, the check will not be
+performed, and the IOMMU will be left disabled. This option
+has been added to all current Haswell boards, though it is
+recommended to leave the IOMMU turned on in most setups.
+
+Signed-off-by: Leah Rowe <info@minifree.org>
+---
+ src/mainboard/asrock/b85m_pro4/cmos.default | 1 +
+ src/mainboard/asrock/b85m_pro4/cmos.layout | 3 +++
+ src/mainboard/asrock/h81m-hds/cmos.default | 1 +
+ src/mainboard/asrock/h81m-hds/cmos.layout | 6 ++++++
+ src/mainboard/dell/optiplex_9020/cmos.default | 1 +
+ src/mainboard/dell/optiplex_9020/cmos.layout | 6 ++++++
+ src/mainboard/google/beltino/cmos.layout | 5 +++++
+ src/mainboard/google/slippy/cmos.layout | 5 +++++
+ src/mainboard/intel/baskingridge/cmos.layout | 4 ++++
+ src/mainboard/lenovo/haswell/cmos.default | 1 +
+ src/mainboard/lenovo/haswell/cmos.layout | 3 +++
+ src/mainboard/supermicro/x10slm-f/cmos.default | 1 +
+ src/mainboard/supermicro/x10slm-f/cmos.layout | 6 ++++++
+ src/northbridge/intel/haswell/early_init.c | 5 +++++
+ 14 files changed, 48 insertions(+)
+
+diff --git a/src/mainboard/asrock/b85m_pro4/cmos.default b/src/mainboard/asrock/b85m_pro4/cmos.default
+index 01bf20ad16..dfc8b80fb0 100644
+--- a/src/mainboard/asrock/b85m_pro4/cmos.default
++++ b/src/mainboard/asrock/b85m_pro4/cmos.default
+@@ -4,3 +4,4 @@ boot_option=Fallback
+ debug_level=Debug
+ nmi=Enable
+ power_on_after_fail=Disable
++iommu=Enable
+diff --git a/src/mainboard/asrock/b85m_pro4/cmos.layout b/src/mainboard/asrock/b85m_pro4/cmos.layout
+index efdc333fc2..c9883ea71d 100644
+--- a/src/mainboard/asrock/b85m_pro4/cmos.layout
++++ b/src/mainboard/asrock/b85m_pro4/cmos.layout
+@@ -11,6 +11,7 @@
+ 395 4 e 4 debug_level
+ 408 1 e 1 nmi
+ 409 2 e 5 power_on_after_fail
++ 412 1 e 6 iommu
+ 984 16 h 0 check_sum
+ # -----------------------------------------------------------------
+
+@@ -38,6 +39,8 @@
+ 5 0 Disable
+ 5 1 Enable
+ 5 2 Keep
++ 6 0 Disable
++ 6 1 Enable
+ # -----------------------------------------------------------------
+
+ # -----------------------------------------------------------------
+diff --git a/src/mainboard/asrock/h81m-hds/cmos.default b/src/mainboard/asrock/h81m-hds/cmos.default
+index 01bf20ad16..dfc8b80fb0 100644
+--- a/src/mainboard/asrock/h81m-hds/cmos.default
++++ b/src/mainboard/asrock/h81m-hds/cmos.default
+@@ -4,3 +4,4 @@ boot_option=Fallback
+ debug_level=Debug
+ nmi=Enable
+ power_on_after_fail=Disable
++iommu=Enable
+diff --git a/src/mainboard/asrock/h81m-hds/cmos.layout b/src/mainboard/asrock/h81m-hds/cmos.layout
+index c9ba76c78f..95ee3d36fb 100644
+--- a/src/mainboard/asrock/h81m-hds/cmos.layout
++++ b/src/mainboard/asrock/h81m-hds/cmos.layout
+@@ -21,6 +21,9 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 5 power_on_after_fail
+
++# enable or disable iommu
++412 1 e 6 iommu
++
+ # coreboot config options: check sums
+ 984 16 h 0 check_sum
+
+@@ -52,6 +55,9 @@ enumerations
+ 5 1 Enable
+ 5 2 Keep
+
++6 0 Disable
++6 1 Enable
++
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
+index cd4046f1ab..c974022472 100644
+--- a/src/mainboard/dell/optiplex_9020/cmos.default
++++ b/src/mainboard/dell/optiplex_9020/cmos.default
+@@ -3,3 +3,4 @@ boot_option=Fallback
+ debug_level=Debug
+ nmi=Disable
+ power_on_after_fail=Disable
++iommu=Enable
+diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout
+index c9ba76c78f..72ff9c4bee 100644
+--- a/src/mainboard/dell/optiplex_9020/cmos.layout
++++ b/src/mainboard/dell/optiplex_9020/cmos.layout
+@@ -21,6 +21,9 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 5 power_on_after_fail
+
++# turn iommu on or off
++412 1 e 6 iommu
++
+ # coreboot config options: check sums
+ 984 16 h 0 check_sum
+
+@@ -52,6 +55,9 @@ enumerations
+ 5 1 Enable
+ 5 2 Keep
+
++6 0 Disable
++6 1 Enable
++
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/mainboard/google/beltino/cmos.layout b/src/mainboard/google/beltino/cmos.layout
+index 78d44c1415..c143979ae1 100644
+--- a/src/mainboard/google/beltino/cmos.layout
++++ b/src/mainboard/google/beltino/cmos.layout
+@@ -19,6 +19,9 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 7 power_on_after_fail
+
++# enable or disable iommu
++412 1 e 8 iommu
++
+ # coreboot config options: bootloader
+ #Used by ChromeOS:
+ 416 128 r 0 vbnv
+@@ -47,6 +50,8 @@ enumerations
+ 7 0 Disable
+ 7 1 Enable
+ 7 2 Keep
++8 0 Disable
++8 1 Enable
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout
+index 78d44c1415..c143979ae1 100644
+--- a/src/mainboard/google/slippy/cmos.layout
++++ b/src/mainboard/google/slippy/cmos.layout
+@@ -19,6 +19,9 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 7 power_on_after_fail
+
++# enable or disable iommu
++412 1 e 8 iommu
++
+ # coreboot config options: bootloader
+ #Used by ChromeOS:
+ 416 128 r 0 vbnv
+@@ -47,6 +50,8 @@ enumerations
+ 7 0 Disable
+ 7 1 Enable
+ 7 2 Keep
++8 0 Disable
++8 1 Enable
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/mainboard/intel/baskingridge/cmos.layout b/src/mainboard/intel/baskingridge/cmos.layout
+index 78d44c1415..f2c602f541 100644
+--- a/src/mainboard/intel/baskingridge/cmos.layout
++++ b/src/mainboard/intel/baskingridge/cmos.layout
+@@ -19,6 +19,8 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 7 power_on_after_fail
+
++412 1 e 8 iommu
++
+ # coreboot config options: bootloader
+ #Used by ChromeOS:
+ 416 128 r 0 vbnv
+@@ -47,6 +49,8 @@ enumerations
+ 7 0 Disable
+ 7 1 Enable
+ 7 2 Keep
++8 0 Disable
++8 1 Enable
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/mainboard/lenovo/haswell/cmos.default b/src/mainboard/lenovo/haswell/cmos.default
+index 08db97c5a9..cc6b363cd9 100644
+--- a/src/mainboard/lenovo/haswell/cmos.default
++++ b/src/mainboard/lenovo/haswell/cmos.default
+@@ -14,3 +14,4 @@ trackpoint=Enable
+ backlight=Keyboard
+ enable_dual_graphics=Disable
+ usb_always_on=Disable
++iommu=Enable
+diff --git a/src/mainboard/lenovo/haswell/cmos.layout b/src/mainboard/lenovo/haswell/cmos.layout
+index 27915d3ab7..59df76b64c 100644
+--- a/src/mainboard/lenovo/haswell/cmos.layout
++++ b/src/mainboard/lenovo/haswell/cmos.layout
+@@ -23,6 +23,7 @@ entries
+
+ # coreboot config options: EC
+ 411 1 e 8 first_battery
++413 1 e 14 iommu
+ 415 1 e 1 wlan
+ 416 1 e 1 trackpoint
+ 417 1 e 1 fn_ctrl_swap
+@@ -72,6 +73,8 @@ enumerations
+ 13 0 Disable
+ 13 1 AC and battery
+ 13 2 AC only
++14 0 Disable
++14 1 Enable
+
+ # -----------------------------------------------------------------
+ checksums
+diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm-f/cmos.default
+index 7ce38fb5d7..6049e7938a 100644
+--- a/src/mainboard/supermicro/x10slm-f/cmos.default
++++ b/src/mainboard/supermicro/x10slm-f/cmos.default
+@@ -5,3 +5,4 @@ debug_level=Debug
+ nmi=Enable
+ power_on_after_fail=Keep
+ hide_ast2400=Disable
++iommu=Enable
+diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm-f/cmos.layout
+index 38ba87aa45..24d39e97ee 100644
+--- a/src/mainboard/supermicro/x10slm-f/cmos.layout
++++ b/src/mainboard/supermicro/x10slm-f/cmos.layout
+@@ -21,6 +21,9 @@ entries
+ 408 1 e 1 nmi
+ 409 2 e 5 power_on_after_fail
+
++# enable or disable iommu
++412 1 e 6 iommu
++
+ # coreboot config options: mainboard
+ 416 1 e 1 hide_ast2400
+
+@@ -55,6 +58,9 @@ enumerations
+ 5 1 Enable
+ 5 2 Keep
+
++6 0 Disable
++6 1 Enable
++
+ # -----------------------------------------------------------------
+ checksums
+
+diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c
+index e47deb5da6..1a7e0b1076 100644
+--- a/src/northbridge/intel/haswell/early_init.c
++++ b/src/northbridge/intel/haswell/early_init.c
+@@ -5,6 +5,7 @@
+ #include <device/mmio.h>
+ #include <device/pci_def.h>
+ #include <device/pci_ops.h>
++#include <option.h>
+
+ #include "haswell.h"
+
+@@ -157,6 +158,10 @@ static void haswell_setup_misc(void)
+ static void haswell_setup_iommu(void)
+ {
+ const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
++ u8 enable_iommu = get_uint_option("iommu", 1);
++
++ if (!enable_iommu)
++ return;
+
+ if (capid0_a & VTD_DISABLE)
+ return;
+--
+2.39.2
+
diff --git a/config/coreboot/haswell/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch b/config/coreboot/haswell/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch
new file mode 100644
index 00000000..fbb40293
--- /dev/null
+++ b/config/coreboot/haswell/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch
@@ -0,0 +1,29 @@
+From 153ca1a43c2c978fa2b2b82d988b0f838953cfb9 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <info@minifree.org>
+Date: Sat, 2 Mar 2024 23:00:09 +0000
+Subject: [PATCH 2/4] dell/optiplex_9020: Disable IOMMU by default
+
+Needed to make graphics cards work. Turning it on is
+recommended if only using iGPU, otherwise leave it off
+by default. The IOMMU is extremely buggy when a graphics
+card is used. Leaving it off by default will ensure that
+the default ROM images in Libreboot will work on any setup.
+
+Signed-off-by: Leah Rowe <info@minifree.org>
+---
+ src/mainboard/dell/optiplex_9020/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
+index c974022472..a0acd7b6bb 100644
+--- a/src/mainboard/dell/optiplex_9020/cmos.default
++++ b/src/mainboard/dell/optiplex_9020/cmos.default
+@@ -3,4 +3,4 @@ boot_option=Fallback
+ debug_level=Debug
+ nmi=Disable
+ power_on_after_fail=Disable
+-iommu=Enable
++iommu=Disable
+--
+2.39.2
+
diff --git a/config/coreboot/haswell/patches/0023-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch b/config/coreboot/haswell/patches/0023-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch
new file mode 100644
index 00000000..527c18d3
--- /dev/null
+++ b/config/coreboot/haswell/patches/0023-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch
@@ -0,0 +1,594 @@
+From 08bae51a77c2c92fefef79e9c9b6ff963b3812cc Mon Sep 17 00:00:00 2001
+From: Mate Kukri <kukri.mate@gmail.com>
+Date: Sat, 6 Apr 2024 23:25:15 +0100
+Subject: [PATCH 3/4] mb/dell/optiplex_9020: Implement late HWM initialization
+
+There are 4 different chassis types specified by vendor firmware, each
+with a slightly different HWM configuration.
+
+The chassis type to use is determined at runtime by reading a set of
+4 PCH GPIOs: 70, 38, 17, and 0.
+
+Additionally vendor firmware also provides an option to run the fans at
+full speed. This is substituted with a coreboot nvram option in this
+implementation.
+
+This was tested to make fan control work on my OptiPlex 7020 SFF.
+
+NOTE: This is superficially similar to the OptiPlex 9010's SCH5545
+however the OptiPlex 9020's SCH5555 does not use externally
+programmed EC firmware.
+
+Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43
+Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
+---
+ src/mainboard/dell/optiplex_9020/Makefile.mk | 3 +-
+ src/mainboard/dell/optiplex_9020/bootblock.c | 25 +-
+ src/mainboard/dell/optiplex_9020/cmos.default | 1 +
+ src/mainboard/dell/optiplex_9020/cmos.layout | 5 +-
+ src/mainboard/dell/optiplex_9020/mainboard.c | 382 ++++++++++++++++++
+ src/mainboard/dell/optiplex_9020/sch5555_ec.c | 54 +++
+ src/mainboard/dell/optiplex_9020/sch5555_ec.h | 7 +
+ 7 files changed, 455 insertions(+), 22 deletions(-)
+ create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.c
+ create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.h
+
+diff --git a/src/mainboard/dell/optiplex_9020/Makefile.mk b/src/mainboard/dell/optiplex_9020/Makefile.mk
+index 6ca2f2afaa..08e2e53577 100644
+--- a/src/mainboard/dell/optiplex_9020/Makefile.mk
++++ b/src/mainboard/dell/optiplex_9020/Makefile.mk
+@@ -2,4 +2,5 @@
+
+ romstage-y += gpio.c
+ ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
+-bootblock-y += bootblock.c
++ramstage-y += sch5555_ec.c
++bootblock-y += bootblock.c sch5555_ec.c
+diff --git a/src/mainboard/dell/optiplex_9020/bootblock.c b/src/mainboard/dell/optiplex_9020/bootblock.c
+index 2837cf9cf1..e5e759273e 100644
+--- a/src/mainboard/dell/optiplex_9020/bootblock.c
++++ b/src/mainboard/dell/optiplex_9020/bootblock.c
+@@ -4,29 +4,14 @@
+ #include <device/pnp_ops.h>
+ #include <superio/smsc/sch555x/sch555x.h>
+ #include <southbridge/intel/lynxpoint/pch.h>
+-
+-static void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val)
+-{
+- // Clear EC-to-Host mailbox
+- uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
+- outb(tmp, SCH555x_EMI_IOBASE + 1);
+-
+- // Send address and value to the EC
+- sch555x_emi_write16(0, (addr1 * 2) | 0x101);
+- sch555x_emi_write32(4, val | (addr2 << 16));
+-
+- // Wait for acknowledgement message from EC
+- outb(1, SCH555x_EMI_IOBASE);
+- size_t timeout = 0;
+- do {} while (++timeout < 0xfff && (inb(SCH555x_EMI_IOBASE + 1) & 1) == 0);
+-}
++#include "sch5555_ec.h"
+
+ struct ec_init_entry {
+ uint16_t addr;
+ uint8_t val;
+ };
+
+-static void ec_init(void)
++static void bootblock_ec_init(void)
+ {
+ /*
+ * Tables from CORE_PEI
+@@ -108,9 +93,9 @@ void mainboard_config_superio(void)
+ outb(0x01, SCH555x_RUNTIME_IOBASE + SCH555x_RUNTIME_UNK1);
+ outb(0x0f, SCH555x_RUNTIME_IOBASE + SCH555x_RUNTIME_LED);
+
+- // Magic EC init
+- ec_init();
++ // Perform bootblock EC initialization
++ bootblock_ec_init();
+
+- // Magic EC init is needed for UART1 initialization to work
++ // Bootblock EC initialization is required for UART1 to work
+ sch555x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ }
+diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
+index a0acd7b6bb..9e02534c16 100644
+--- a/src/mainboard/dell/optiplex_9020/cmos.default
++++ b/src/mainboard/dell/optiplex_9020/cmos.default
+@@ -4,3 +4,4 @@ debug_level=Debug
+ nmi=Disable
+ power_on_after_fail=Disable
+ iommu=Disable
++fan_full_speed=Disable
+diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout
+index 72ff9c4bee..4a1496a878 100644
+--- a/src/mainboard/dell/optiplex_9020/cmos.layout
++++ b/src/mainboard/dell/optiplex_9020/cmos.layout
+@@ -22,7 +22,10 @@ entries
+ 409 2 e 5 power_on_after_fail
+
+ # turn iommu on or off
+-412 1 e 6 iommu
++411 1 e 6 iommu
++
++# coreboot config options: EC
++412 1 e 1 fan_full_speed
+
+ # coreboot config options: check sums
+ 984 16 h 0 check_sum
+diff --git a/src/mainboard/dell/optiplex_9020/mainboard.c b/src/mainboard/dell/optiplex_9020/mainboard.c
+index c834fea5d3..10b8aaca0e 100644
+--- a/src/mainboard/dell/optiplex_9020/mainboard.c
++++ b/src/mainboard/dell/optiplex_9020/mainboard.c
+@@ -1,7 +1,12 @@
+ /* SPDX-License-Identifier: GPL-2.0-only */
+
++#include <bootstate.h>
++#include <cpu/x86/msr.h>
+ #include <device/device.h>
+ #include <drivers/intel/gma/int15.h>
++#include <option.h>
++#include <southbridge/intel/lynxpoint/lp_gpio.h>
++#include "sch5555_ec.h"
+
+ static void mainboard_enable(struct device *dev)
+ {
+@@ -13,3 +18,380 @@ static void mainboard_enable(struct device *dev)
+ struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+ };
++
++#define HWM_TAB_ADD_TEMP_TARGET 1
++#define HWM_TAB_PKG_POWER_ANY 0xffff
++
++struct hwm_tab_entry {
++ uint16_t addr;
++ uint8_t val;
++ uint8_t flags;
++ uint16_t pkg_power;
++};
++
++struct hwm_tab_entry HWM_TAB3[] = {
++ { 0x005, 0x33, 0, 0xffff },
++ { 0x018, 0x2f, 0, 0xffff },
++ { 0x019, 0x2f, 0, 0xffff },
++ { 0x01a, 0x2f, 0, 0xffff },
++ { 0x080, 0x00, 0, 0xffff },
++ { 0x081, 0x00, 0, 0xffff },
++ { 0x083, 0xbb, 0, 0xffff },
++ { 0x085, 0x8a, 0, 0x0010 },
++ { 0x086, 0x4c, 0, 0x0010 },
++ { 0x08a, 0x66, 0, 0x0010 },
++ { 0x08b, 0x5b, 0, 0x0010 },
++ { 0x090, 0x65, 0, 0xffff },
++ { 0x091, 0x70, 0, 0xffff },
++ { 0x092, 0x86, 0, 0xffff },
++ { 0x096, 0xa4, 0, 0xffff },
++ { 0x097, 0xa4, 0, 0xffff },
++ { 0x098, 0xa4, 0, 0xffff },
++ { 0x09b, 0xa4, 0, 0xffff },
++ { 0x0a0, 0x0e, 0, 0xffff },
++ { 0x0a1, 0x0e, 0, 0xffff },
++ { 0x0ae, 0x7c, 0, 0xffff },
++ { 0x0af, 0x86, 0, 0xffff },
++ { 0x0b0, 0x9a, 0, 0xffff },
++ { 0x0b3, 0x9a, 0, 0xffff },
++ { 0x0b6, 0x08, 0, 0xffff },
++ { 0x0b7, 0x08, 0, 0xffff },
++ { 0x0ea, 0x64, 0, 0x0020 },
++ { 0x0ea, 0x5c, 0, 0x0010 },
++ { 0x0ef, 0xff, 0, 0xffff },
++ { 0x0f8, 0x15, 0, 0xffff },
++ { 0x0f9, 0x00, 0, 0xffff },
++ { 0x0f0, 0x30, 0, 0xffff },
++ { 0x0fd, 0x01, 0, 0xffff },
++ { 0x1a1, 0x00, 0, 0xffff },
++ { 0x1a2, 0x00, 0, 0xffff },
++ { 0x1b1, 0x08, 0, 0xffff },
++ { 0x1be, 0x99, 0, 0xffff },
++ { 0x280, 0xa0, 0, 0x0010 },
++ { 0x281, 0x0f, 0, 0x0010 },
++ { 0x282, 0x03, 0, 0xffff },
++ { 0x283, 0x0a, 0, 0xffff },
++ { 0x284, 0x80, 0, 0xffff },
++ { 0x285, 0x03, 0, 0xffff },
++ { 0x288, 0x68, 0, 0x0010 },
++ { 0x289, 0x10, 0, 0x0010 },
++ { 0x28a, 0x03, 0, 0xffff },
++ { 0x28b, 0x0a, 0, 0xffff },
++ { 0x28c, 0x80, 0, 0xffff },
++ { 0x28d, 0x03, 0, 0xffff },
++};
++
++struct hwm_tab_entry HWM_TAB4[] = {
++ { 0x005, 0x33, 0, 0xffff },
++ { 0x018, 0x2f, 0, 0xffff },
++ { 0x019, 0x2f, 0, 0xffff },
++ { 0x01a, 0x2f, 0, 0xffff },
++ { 0x080, 0x00, 0, 0xffff },
++ { 0x081, 0x00, 0, 0xffff },
++ { 0x083, 0xbb, 0, 0xffff },
++ { 0x085, 0x99, 0, 0x0020 },
++ { 0x085, 0xad, 0, 0x0010 },
++ { 0x086, 0x1c, 0, 0xffff },
++ { 0x08a, 0x39, 0, 0x0020 },
++ { 0x08a, 0x41, 0, 0x0010 },
++ { 0x08b, 0x76, 0, 0x0020 },
++ { 0x08b, 0x8b, 0, 0x0010 },
++ { 0x090, 0x5e, 0, 0xffff },
++ { 0x091, 0x5e, 0, 0xffff },
++ { 0x092, 0x86, 0, 0xffff },
++ { 0x096, 0xa4, 0, 0xffff },
++ { 0x097, 0xa4, 0, 0xffff },
++ { 0x098, 0xa4, 0, 0xffff },
++ { 0x09b, 0xa4, 0, 0xffff },
++ { 0x0a0, 0x0a, 0, 0xffff },
++ { 0x0a1, 0x0a, 0, 0xffff },
++ { 0x0ae, 0x7c, 0, 0xffff },
++ { 0x0af, 0x7c, 0, 0xffff },
++ { 0x0b0, 0x9a, 0, 0xffff },
++ { 0x0b3, 0x7c, 0, 0xffff },
++ { 0x0b6, 0x08, 0, 0xffff },
++ { 0x0b7, 0x08, 0, 0xffff },
++ { 0x0ea, 0x64, 0, 0x0020 },
++ { 0x0ea, 0x5c, 0, 0x0010 },
++ { 0x0ef, 0xff, 0, 0xffff },
++ { 0x0f8, 0x15, 0, 0xffff },
++ { 0x0f9, 0x00, 0, 0xffff },
++ { 0x0f0, 0x30, 0, 0xffff },
++ { 0x0fd, 0x01, 0, 0xffff },
++ { 0x1a1, 0x00, 0, 0xffff },
++ { 0x1a2, 0x00, 0, 0xffff },
++ { 0x1b1, 0x08, 0, 0xffff },
++ { 0x1be, 0x90, 0, 0xffff },
++ { 0x280, 0x94, 0, 0x0020 },
++ { 0x281, 0x11, 0, 0x0020 },
++ { 0x280, 0x94, 0, 0x0010 },
++ { 0x281, 0x11, 0, 0x0010 },
++ { 0x282, 0x03, 0, 0xffff },
++ { 0x283, 0x0a, 0, 0xffff },
++ { 0x284, 0x80, 0, 0xffff },
++ { 0x285, 0x03, 0, 0xffff },
++ { 0x288, 0x28, 0, 0x0020 },
++ { 0x289, 0x0a, 0, 0x0020 },
++ { 0x288, 0x28, 0, 0x0010 },
++ { 0x289, 0x0a, 0, 0x0010 },
++ { 0x28a, 0x03, 0, 0xffff },
++ { 0x28b, 0x0a, 0, 0xffff },
++ { 0x28c, 0x80, 0, 0xffff },
++ { 0x28d, 0x03, 0, 0xffff },
++};
++
++struct hwm_tab_entry HWM_TAB5[] = {
++ { 0x005, 0x33, 0, 0xffff },
++ { 0x018, 0x2f, 0, 0xffff },
++ { 0x019, 0x2f, 0, 0xffff },
++ { 0x01a, 0x2f, 0, 0xffff },
++ { 0x080, 0x00, 0, 0xffff },
++ { 0x081, 0x00, 0, 0xffff },
++ { 0x083, 0xbb, 0, 0xffff },
++ { 0x085, 0x66, 0, 0x0020 },
++ { 0x085, 0x5d, 0, 0x0010 },
++ { 0x086, 0x1c, 0, 0xffff },
++ { 0x08a, 0x39, 0, 0x0020 },
++ { 0x08a, 0x41, 0, 0x0010 },
++ { 0x08b, 0x76, 0, 0x0020 },
++ { 0x08b, 0x80, 0, 0x0010 },
++ { 0x090, 0x5d, 0, 0x0020 },
++ { 0x090, 0x5e, 0, 0x0010 },
++ { 0x091, 0x5e, 0, 0xffff },
++ { 0x092, 0x86, 0, 0xffff },
++ { 0x096, 0xa4, 0, 0xffff },
++ { 0x097, 0xa4, 0, 0xffff },
++ { 0x098, 0xa3, 0, 0x0020 },
++ { 0x098, 0xa4, 0, 0x0010 },
++ { 0x09b, 0xa4, 0, 0xffff },
++ { 0x0a0, 0x08, 0, 0xffff },
++ { 0x0a1, 0x0a, 0, 0xffff },
++ { 0x0ae, 0x7c, 0, 0xffff },
++ { 0x0af, 0x7c, 0, 0xffff },
++ { 0x0b0, 0x9a, 0, 0xffff },
++ { 0x0b3, 0x7c, 0, 0xffff },
++ { 0x0b6, 0x08, 0, 0xffff },
++ { 0x0b7, 0x08, 0, 0xffff },
++ { 0x0ea, 0x64, 0, 0x0020 },
++ { 0x0ea, 0x5c, 0, 0x0010 },
++ { 0x0ef, 0xff, 0, 0xffff },
++ { 0x0f8, 0x15, 0, 0xffff },
++ { 0x0f9, 0x00, 0, 0xffff },
++ { 0x0f0, 0x30, 0, 0xffff },
++ { 0x0fd, 0x01, 0, 0xffff },
++ { 0x1a1, 0x00, 0, 0xffff },
++ { 0x1a2, 0x00, 0, 0xffff },
++ { 0x1b1, 0x08, 0, 0xffff },
++ { 0x1be, 0x98, 0, 0x0020 },
++ { 0x1be, 0x90, 0, 0x0010 },
++ { 0x280, 0x94, 0, 0x0020 },
++ { 0x281, 0x11, 0, 0x0020 },
++ { 0x280, 0x94, 0, 0x0010 },
++ { 0x281, 0x11, 0, 0x0010 },
++ { 0x282, 0x03, 0, 0xffff },
++ { 0x283, 0x0a, 0, 0xffff },
++ { 0x284, 0x80, 0, 0xffff },
++ { 0x285, 0x03, 0, 0xffff },
++ { 0x288, 0x28, 0, 0x0020 },
++ { 0x289, 0x0a, 0, 0x0020 },
++ { 0x288, 0x28, 0, 0x0010 },
++ { 0x289, 0x0a, 0, 0x0010 },
++ { 0x28a, 0x03, 0, 0xffff },
++ { 0x28b, 0x0a, 0, 0xffff },
++ { 0x28c, 0x80, 0, 0xffff },
++ { 0x28d, 0x03, 0, 0xffff },
++};
++
++struct hwm_tab_entry HWM_TAB6[] = {
++ { 0x005, 0x33, 0, 0xffff },
++ { 0x018, 0x2f, 0, 0xffff },
++ { 0x019, 0x2f, 0, 0xffff },
++ { 0x01a, 0x2f, 0, 0xffff },
++ { 0x080, 0x00, 0, 0xffff },
++ { 0x081, 0x00, 0, 0xffff },
++ { 0x083, 0xbb, 0, 0xffff },
++ { 0x085, 0x98, 0, 0xffff },
++ { 0x086, 0x3c, 0, 0xffff },
++ { 0x08a, 0x39, 0, 0x0020 },
++ { 0x08a, 0x3d, 0, 0x0010 },
++ { 0x08b, 0x44, 0, 0x0020 },
++ { 0x08b, 0x51, 0, 0x0010 },
++ { 0x090, 0x61, 0, 0xffff },
++ { 0x091, 0x6d, 0, 0xffff },
++ { 0x092, 0x86, 0, 0xffff },
++ { 0x096, 0xa4, 0, 0xffff },
++ { 0x097, 0xa4, 0, 0xffff },
++ { 0x098, 0x9f, 0, 0x0020 },
++ { 0x098, 0xa4, 0, 0x0010 },
++ { 0x09b, 0xa4, 0, 0xffff },
++ { 0x0a0, 0x0e, 0, 0xffff },
++ { 0x0a1, 0x0e, 0, 0xffff },
++ { 0x0ae, 0x7c, 0, 0xffff },
++ { 0x0af, 0x7c, 0, 0xffff },
++ { 0x0b0, 0x9b, 0, 0x0020 },
++ { 0x0b0, 0x98, 0, 0x0010 },
++ { 0x0b3, 0x9a, 0, 0xffff },
++ { 0x0b6, 0x08, 0, 0xffff },
++ { 0x0b7, 0x08, 0, 0xffff },
++ { 0x0ea, 0x64, 0, 0x0020 },
++ { 0x0ea, 0x5c, 0, 0x0010 },
++ { 0x0ef, 0xff, 0, 0xffff },
++ { 0x0f8, 0x15, 0, 0xffff },
++ { 0x0f9, 0x00, 0, 0xffff },
++ { 0x0f0, 0x30, 0, 0xffff },
++ { 0x0fd, 0x01, 0, 0xffff },
++ { 0x1a1, 0x00, 0, 0xffff },
++ { 0x1a2, 0x00, 0, 0xffff },
++ { 0x1b1, 0x08, 0, 0xffff },
++ { 0x1be, 0x9a, 0, 0x0020 },
++ { 0x1be, 0x96, 0, 0x0010 },
++ { 0x280, 0x94, 0, 0x0020 },
++ { 0x281, 0x11, 0, 0x0020 },
++ { 0x280, 0x94, 0, 0x0010 },
++ { 0x281, 0x11, 0, 0x0010 },
++ { 0x282, 0x03, 0, 0xffff },
++ { 0x283, 0x0a, 0, 0xffff },
++ { 0x284, 0x80, 0, 0xffff },
++ { 0x285, 0x03, 0, 0xffff },
++ { 0x288, 0x94, 0, 0x0020 },
++ { 0x289, 0x11, 0, 0x0020 },
++ { 0x288, 0x94, 0, 0x0010 },
++ { 0x289, 0x11, 0, 0x0010 },
++ { 0x28a, 0x03, 0, 0xffff },
++ { 0x28b, 0x0a, 0, 0xffff },
++ { 0x28c, 0x80, 0, 0xffff },
++ { 0x28d, 0x03, 0, 0xffff },
++};
++
++static uint8_t get_chassis_type(void)
++{
++ uint8_t gpio_chassis_type;
++
++ // Read chassis type from GPIO
++ gpio_chassis_type = get_gpio(70) << 3 | get_gpio(38) << 2 |
++ get_gpio(17) << 1 | get_gpio(0);
++
++ printk(BIOS_DEBUG, "GPIO chassis type = %#x\n", gpio_chassis_type);
++
++ // Turn it into internal chassis index
++ switch (gpio_chassis_type) {
++ case 0x08:
++ case 0x0a:
++ return 4;
++ case 0x0b:
++ return 3;
++ case 0x0c:
++ return 5;
++ case 0x0d: // SFF
++ case 0x0e:
++ case 0x0f:
++ return 6;
++ default:
++ die("Unknown GPIO chassis type\n");
++ }
++
++}
++
++static uint8_t get_temp_target(void)
++{
++ uint8_t val = rdmsr(0x1a2).lo >> 8 & 0xff;
++ if (!val)
++ val = 20;
++ return 0x95 - val;
++}
++
++static uint16_t get_pkg_power(void)
++{
++ uint8_t rapl_power_unit = rdmsr(0x606).lo & 0xf;
++ if (rapl_power_unit)
++ rapl_power_unit = 2 << (rapl_power_unit - 1);
++ uint16_t pkg_power_info = rdmsr(0x614).lo & 0x7fff;
++ if (pkg_power_info / rapl_power_unit > 0x41)
++ return 32;
++ else
++ return 16;
++}
++
++static void apply_hwm_tab(struct hwm_tab_entry *arr, size_t size)
++{
++ uint8_t temp_target = get_temp_target();
++ uint16_t pkg_power = get_pkg_power();
++
++ printk(BIOS_DEBUG, "Temp target = %#x\n", temp_target);
++ printk(BIOS_DEBUG, "Package power = %#x\n", pkg_power);
++
++ for (size_t i = 0; i < size; ++i) {
++ // Skip entry if it doesn't apply for this package power
++ if (arr[i].pkg_power != pkg_power &&
++ arr[i].pkg_power != HWM_TAB_PKG_POWER_ANY)
++ continue;
++
++ uint8_t val = arr[i].val;
++
++ // Add temp target to value if requested (current tables never do)
++ if (arr[i].flags & HWM_TAB_ADD_TEMP_TARGET)
++ val += temp_target;
++
++ // Perform write
++ ec_write(1, arr[i].addr, val);
++
++ }
++}
++
++static void sch5555_ec_hwm_init(void *arg)
++{
++ uint8_t chassis_type, saved_2fc;
++
++ printk(BIOS_DEBUG, "OptiPlex 9020 late HWM init\n");
++
++ saved_2fc = ec_read(1, 0x2fc);
++ ec_write(1, 0x2fc, 0xa0);
++ ec_write(1, 0x2fd, 0x32);
++
++ // Apply HWM table based on chassis type
++ chassis_type = get_chassis_type();
++ printk(BIOS_DEBUG, "Chassis type = %#x\n", chassis_type);
++ switch (chassis_type) {
++ case 3:
++ apply_hwm_tab(HWM_TAB3, ARRAY_SIZE(HWM_TAB3));
++ break;
++ case 4:
++ apply_hwm_tab(HWM_TAB4, ARRAY_SIZE(HWM_TAB4));
++ break;
++ case 5:
++ apply_hwm_tab(HWM_TAB5, ARRAY_SIZE(HWM_TAB5));
++ break;
++ case 6:
++ apply_hwm_tab(HWM_TAB6, ARRAY_SIZE(HWM_TAB6));
++ break;
++ default:
++ die("Unknown chassis type\n");
++ }
++
++ if (CONFIG_MAX_CPUS > 2) {
++ ec_write(1, 0x9e, 0x30);
++ ec_write(1, 0xeb, ec_read(1, 0xea));
++ }
++
++ ec_write(1, 0x2fc, saved_2fc);
++
++ // Apply full speed fan config if requested
++ if (get_uint_option("fan_full_speed", 0)) {
++ printk(BIOS_DEBUG, "Setting full fan speed\n");
++ ec_write(1, 0x80, 0x60 | ec_read(1, 0x80));
++ ec_write(1, 0x81, 0x60 | ec_read(1, 0x81));
++ }
++
++ ec_read(1, 0xb8);
++
++ if ((chassis_type == 4 || chassis_type == 5) && ec_read(1, 0x26) == 0) {
++ ec_write(1, 0xa0, ec_read(1, 0xa0) & 0xfb);
++ ec_write(1, 0xa1, ec_read(1, 0xa1) & 0xfb);
++ ec_write(1, 0xa2, ec_read(1, 0xa2) & 0xfb);
++ ec_write(1, 0x8a, 0x99);
++ ec_write(1, 0x8b, 0x47);
++ ec_write(1, 0x8c, 0x91);
++ }
++}
++
++BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_EXIT, sch5555_ec_hwm_init, NULL);
+diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.c b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
+new file mode 100644
+index 0000000000..92244da9ab
+--- /dev/null
++++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
+@@ -0,0 +1,54 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <arch/io.h>
++#include <device/pnp_ops.h>
++#include <superio/smsc/sch555x/sch555x.h>
++#include "sch5555_ec.h"
++
++uint8_t ec_read(uint8_t addr1, uint16_t addr2)
++{
++ // clear ec-to-host mailbox
++ uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
++ outb(tmp, SCH555x_EMI_IOBASE + 1);
++
++ // send address
++ outw(0 | 0x8001, SCH555x_EMI_IOBASE + 2);
++ outw((addr1 * 2) | 0x100, SCH555x_EMI_IOBASE + 4);
++
++ outw(4 | 0x8002, SCH555x_EMI_IOBASE + 2);
++ outl(addr2 << 16, SCH555x_EMI_IOBASE + 4);
++
++ // send message to ec
++ outb(1, SCH555x_EMI_IOBASE);
++
++ // wait for ack
++ for (size_t timeout = 0; timeout < 0xfff; ++timeout)
++ if (inb(SCH555x_EMI_IOBASE + 1) & 1)
++ break;
++
++ // read result
++ outw(4 | 0x8000, SCH555x_EMI_IOBASE + 2);
++ return inb(SCH555x_EMI_IOBASE + 4);
++}
++
++void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val)
++{
++ // clear ec-to-host mailbox
++ uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
++ outb(tmp, SCH555x_EMI_IOBASE + 1);
++
++ // send address and value
++ outw(0 | 0x8001, SCH555x_EMI_IOBASE + 2);
++ outw((addr1 * 2) | 0x101, SCH555x_EMI_IOBASE + 4);
++
++ outw(4 | 0x8002, SCH555x_EMI_IOBASE + 2);
++ outl(val | (addr2 << 16), SCH555x_EMI_IOBASE + 4);
++
++ // send message to ec
++ outb(1, SCH555x_EMI_IOBASE);
++
++ // wait for ack
++ for (size_t timeout = 0; timeout < 0xfff; ++timeout)
++ if (inb(SCH555x_EMI_IOBASE + 1) & 1)
++ break;
++}
+diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.h b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
+new file mode 100644
+index 0000000000..6e703ff865
+--- /dev/null
++++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
+@@ -0,0 +1,7 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#pragma once
++
++uint8_t ec_read(uint8_t addr1, uint16_t addr2);
++
++void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val);
+--
+2.39.2
+
diff --git a/config/coreboot/haswell/patches/0024-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch b/config/coreboot/haswell/patches/0024-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch
new file mode 100644
index 00000000..fb112f8c
--- /dev/null
+++ b/config/coreboot/haswell/patches/0024-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch
@@ -0,0 +1,51 @@
+From ae494dc1b1dde92ec42390b85ced0ffe816f5110 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <info@minifree.org>
+Date: Sat, 6 Apr 2024 01:22:47 +0100
+Subject: [PATCH 4/4] nb/haswell: Fully disable iGPU when dGPU is used
+
+My earlier patch disabled decode *and* disabled the iGPU itself, but
+a subsequent revision disabled only VGA decode. Upon revisiting, I
+found that, actually, yes, you also need to disable the iGPU entirely.
+
+Tested on Dell 9020 SFF using broadwell MRC, with both iGPU and dGPU.
+With this patch, the iGPU is completely disabled when you install a
+graphics card, but the iGPU is available to use when no graphics card
+is present.
+
+For more context, see:
+
+Author: Leah Rowe <info@minifree.org>
+Date: Fri Feb 23 13:33:31 2024 +0000
+
+ nb/haswell: Disable iGPU when dGPU is used
+
+And look at the Gerrit comments:
+
+https://review.coreboot.org/c/coreboot/+/80717/
+
+So, my original submission on change 80717 was actually correct.
+This patch fixes the issue. I tested on iGPU and dGPU, with both
+broadwell and haswell mrc.bin.
+
+Signed-off-by: Leah Rowe <info@minifree.org>
+---
+ src/northbridge/intel/haswell/gma.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
+index 9e9f9804f5..526a51aff0 100644
+--- a/src/northbridge/intel/haswell/gma.c
++++ b/src/northbridge/intel/haswell/gma.c
+@@ -464,6 +464,9 @@ static void gma_func0_disable(struct device *dev)
+ {
+ /* Disable VGA decode */
+ pci_or_config16(pcidev_on_root(0, 0), GGC, 1 << 1);
++
++ /* Required or else the graphics card doesn't work */
++ dev->enabled = 0;
+ }
+
+ static struct device_operations gma_func0_ops = {
+--
+2.39.2
+