diff options
Diffstat (limited to 'config/coreboot/haswell/patches/0021-haswell-NRI-Add-RcvEn-training.patch')
-rw-r--r-- | config/coreboot/haswell/patches/0021-haswell-NRI-Add-RcvEn-training.patch | 708 |
1 files changed, 0 insertions, 708 deletions
diff --git a/config/coreboot/haswell/patches/0021-haswell-NRI-Add-RcvEn-training.patch b/config/coreboot/haswell/patches/0021-haswell-NRI-Add-RcvEn-training.patch deleted file mode 100644 index 9139a67e..00000000 --- a/config/coreboot/haswell/patches/0021-haswell-NRI-Add-RcvEn-training.patch +++ /dev/null @@ -1,708 +0,0 @@ -From ac8843553af34855d0331554c03280e66c4ea582 Mon Sep 17 00:00:00 2001 -From: Angel Pons <th3fanbus@gmail.com> -Date: Sun, 8 May 2022 00:05:41 +0200 -Subject: [PATCH 21/26] haswell NRI: Add RcvEn training - -Implement the RcvEn (Receive Enable) calibration procedure. - -Change-Id: Ifbfa520f3e0486c56d0988ce67af2ddb9cf29888 -Signed-off-by: Angel Pons <th3fanbus@gmail.com> ---- - .../intel/haswell/native_raminit/Makefile.inc | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 14 + - .../haswell/native_raminit/reg_structs.h | 13 + - .../native_raminit/train_receive_enable.c | 561 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 3 + - 6 files changed, 593 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_receive_enable.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.inc b/src/northbridge/intel/haswell/native_raminit/Makefile.inc -index ebe9e9b762..e2fbfb4211 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.inc -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.inc -@@ -16,3 +16,4 @@ romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c - romstage-y += timings_refresh.c -+romstage-y += train_receive_enable.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 5e4674957d..7d444659c3 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = { - { configure_memory_map, true, "MEMMAP", }, - { do_jedec_init, true, "JEDECINIT", }, - { pre_training, true, "PRETRAIN", }, -+ { train_receive_enable, true, "RCVET", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 7c1a786780..a36ebfacd1 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -42,6 +42,9 @@ - #define NUM_WDB_CL_MUX_SEEDS 3 - #define NUM_CADB_MUX_SEEDS 3 - -+/* Specified in PI ticks. 64 PI ticks == 1 qclk */ -+#define tDQSCK_DRIFT 64 -+ - /* ZQ calibration types */ - enum { - ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ -@@ -188,6 +191,7 @@ enum raminit_status { - RAMINIT_STATUS_MPLL_INIT_FAILURE, - RAMINIT_STATUS_POLL_TIMEOUT, - RAMINIT_STATUS_REUT_ERROR, -+ RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -270,6 +274,10 @@ struct sysinfo { - - union ddr_data_vref_adjust_reg dimm_vref; - -+ uint8_t io_latency[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint8_t rt_latency[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint32_t rt_io_comp[NUM_CHANNELS]; -+ - uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES]; - uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES]; - -@@ -344,6 +352,11 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) - memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); - } - -+static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint8_t byte) -+{ -+ return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); -+} -+ - /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ - static inline void tick_delay(const uint32_t delay) - { -@@ -401,6 +414,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl); - enum raminit_status configure_mc(struct sysinfo *ctrl); - enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); -+enum raminit_status train_receive_enable(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index b943259b91..b099f4bb82 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -297,6 +297,19 @@ union ddr_scram_misc_control_reg { - uint32_t raw; - }; - -+union sc_io_latency_reg { -+ struct __packed { -+ uint32_t iolat_rank0 : 4; // Bits 3:0 -+ uint32_t iolat_rank1 : 4; // Bits 7:4 -+ uint32_t iolat_rank2 : 4; // Bits 11:8 -+ uint32_t iolat_rank3 : 4; // Bits 15:12 -+ uint32_t rt_iocomp : 6; // Bits 21:16 -+ uint32_t : 9; // Bits 30:22 -+ uint32_t dis_rt_clk_gate : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ - union mcscheds_cbit_reg { - struct __packed { - uint32_t dis_opp_cas : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c -new file mode 100644 -index 0000000000..576c6bc21e ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c -@@ -0,0 +1,561 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include <console/console.h> -+#include <northbridge/intel/haswell/haswell.h> -+#include <types.h> -+ -+#include "raminit_native.h" -+#include "ranges.h" -+ -+#define RCVEN_PLOT RAM_DEBUG -+ -+static enum raminit_status change_rcven_timing(struct sysinfo *ctrl, const uint8_t channel) -+{ -+ int16_t max_rcven = -4096; -+ int16_t min_rcven = 4096; -+ int16_t max_rcven_rank[NUM_SLOTRANKS]; -+ int16_t min_rcven_rank[NUM_SLOTRANKS]; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ max_rcven_rank[rank] = max_rcven; -+ min_rcven_rank[rank] = min_rcven; -+ } -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t new_rcven = ctrl->rcven[channel][rank][byte]; -+ new_rcven -= ctrl->io_latency[channel][rank] * 64; -+ if (max_rcven_rank[rank] < new_rcven) -+ max_rcven_rank[rank] = new_rcven; -+ -+ if (min_rcven_rank[rank] > new_rcven) -+ min_rcven_rank[rank] = new_rcven; -+ } -+ if (max_rcven < max_rcven_rank[rank]) -+ max_rcven = max_rcven_rank[rank]; -+ -+ if (min_rcven > min_rcven_rank[rank]) -+ min_rcven = min_rcven_rank[rank]; -+ } -+ -+ /* -+ * Determine how far we are from the ideal center point for RcvEn timing. -+ * (PiIdeal - AveRcvEn) / 64 is the ideal number of cycles we should have -+ * for IO latency. command training will reduce this by 64, so plan for -+ * that now in the ideal value. Round to closest integer. -+ */ -+ const int16_t rre_pi_ideal = 256 + 64; -+ const int16_t pi_reserve = 64; -+ const int16_t rcven_center = (max_rcven + min_rcven) / 2; -+ const int8_t iolat_target = DIV_ROUND_CLOSEST(rre_pi_ideal - rcven_center, 64); -+ -+ int8_t io_g_offset = 0; -+ int8_t io_lat[NUM_SLOTRANKS] = { 0 }; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ io_lat[rank] = iolat_target; -+ -+ /* Check for RcvEn underflow/overflow */ -+ const int16_t rcven_lower = 64 * io_lat[rank] + min_rcven_rank[rank]; -+ if (rcven_lower < pi_reserve) -+ io_lat[rank] += DIV_ROUND_UP(pi_reserve - rcven_lower, 64); -+ -+ const int16_t rcven_upper = 64 * io_lat[rank] + max_rcven_rank[rank]; -+ if (rcven_upper > 511 - pi_reserve) -+ io_lat[rank] -= DIV_ROUND_UP(rcven_upper - (511 - pi_reserve), 64); -+ -+ /* Check for IO latency over/underflow */ -+ if (io_lat[rank] - io_g_offset > 14) -+ io_g_offset = io_lat[rank] - 14; -+ -+ if (io_lat[rank] - io_g_offset < 1) -+ io_g_offset = io_lat[rank] - 1; -+ -+ const int8_t cycle_offset = io_lat[rank] - ctrl->io_latency[channel][rank]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ ctrl->rcven[channel][rank][byte] += 64 * cycle_offset; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ -+ /* Calculate new IO comp latency */ -+ union sc_io_latency_reg sc_io_lat = { -+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), -+ }; -+ -+ /* Check if we are underflowing or overflowing this field */ -+ if (io_g_offset < 0 && sc_io_lat.rt_iocomp < -io_g_offset) { -+ printk(BIOS_ERR, "%s: IO COMP underflow\n", __func__); -+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); -+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (io_g_offset > 0 && io_g_offset > 0x3f - sc_io_lat.rt_iocomp) { -+ printk(BIOS_ERR, "%s: IO COMP overflow\n", __func__); -+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); -+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ sc_io_lat.rt_iocomp += io_g_offset; -+ ctrl->rt_io_comp[channel] = sc_io_lat.rt_iocomp; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (ctrl->rankmap[channel] & BIT(rank)) -+ ctrl->io_latency[channel][rank] = io_lat[rank] - io_g_offset; -+ -+ const uint8_t shift = rank * 4; -+ sc_io_lat.raw &= ~(0xf << shift); -+ sc_io_lat.raw |= ctrl->io_latency[channel][rank] << shift; -+ } -+ mchbar_write32(SC_IO_LATENCY_ch(channel), sc_io_lat.raw); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+#define RL_START (256 + 24) -+#define RL_STOP (384 + 24) -+#define RL_STEP 8 -+ -+#define RE_NUM_SAMPLES 6 -+ -+static enum raminit_status verify_high_region(const int32_t center, const int32_t lwidth) -+{ -+ if (center > RL_STOP) { -+ /* Check if center of high was found where it should be */ -+ printk(BIOS_ERR, "RcvEn: Center of high (%d) higher than expected\n", center); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (lwidth <= 32) { -+ /* Check if width is large enough */ -+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too small\n", lwidth); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (lwidth >= 96) { -+ /* Since we're calibrating a phase, a too large region is a problem */ -+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too large\n", lwidth); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+static void program_io_latency(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) -+{ -+ const uint8_t shift = rank * 4; -+ const uint8_t iolat = ctrl->io_latency[channel][rank]; -+ mchbar_clrsetbits32(SC_IO_LATENCY_ch(channel), 0xf << shift, iolat << shift); -+} -+ -+static void program_rl_delays(struct sysinfo *ctrl, const uint8_t rank, const uint16_t rl_delay) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ update_rxt(ctrl, channel, rank, byte, RXT_RCVEN, rl_delay); -+ } -+} -+ -+static bool sample_dqs(const uint8_t channel, const uint8_t byte) -+{ -+ return (get_data_train_feedback(channel, byte) & 0x1ff) >= BIT(RE_NUM_SAMPLES - 1); -+} -+ -+enum raminit_status train_receive_enable(struct sysinfo *ctrl) -+{ -+ const struct reut_box reut_addr = { -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_rate = 0, -+ .inc_val = 1, -+ }, -+ }; -+ const struct wdb_pat wdb_pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 9, -+ .inc_rate = 32, -+ .dq_pattern = BASIC_VA, -+ }; -+ -+ const uint16_t bytemask = BIT(ctrl->lanes) - 1; -+ const uint8_t fine_step = 1; -+ -+ const uint8_t rt_delta = is_hsw_ult() ? 4 : 2; -+ const uint8_t rt_io_comp = 21 + rt_delta; -+ const uint8_t rt_latency = 16 + rt_delta; -+ setup_io_test( -+ ctrl, -+ ctrl->chanmap, -+ PAT_RD, -+ 2, -+ RE_NUM_SAMPLES + 1, -+ &reut_addr, -+ 0, -+ &wdb_pattern, -+ 0, -+ 8); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_rx_on = 1; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ } -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ if (ctrl->lpddr) { -+ /** -+ * W/A for b4618574 - @todo: remove for HSW ULT C0 -+ * Can't have force_odt_on together with leaker, disable LPDDR -+ * mode during this training step. lpddr_mode is restored -+ * at the end of this function from the host structure. -+ */ -+ data_control_0.lpddr_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ data_control_0.force_odt_on = 1; -+ data_control_0.rl_training_mode = 1; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ mchbar_write32(SC_IO_LATENCY_ch(channel), (union sc_io_latency_reg) { -+ .rt_iocomp = rt_io_comp, -+ }.raw); -+ } -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ /* -+ * Set initial roundtrip latency values. Assume -4 QCLK for worst board -+ * layout. This is calculated as HW_ROUNDT_LAT_DEFAULT_VALUE plus: -+ * -+ * DDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + N-mode value * 2 -+ * LPDDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + tDQSCK_max -+ * -+ * N-mode is 3 during training mode. Both channels use the same timings. -+ */ -+ /** TODO: differs for LPDDR **/ -+ const uint32_t tmp = MAX(ctrl->multiplier, 4) + 5 + 2 * ctrl->tAA; -+ const uint32_t initial_rt_latency = MIN(rt_latency + tmp, 0x3f); -+ -+ uint8_t chanmask = 0; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ ctrl->io_latency[channel][rank] = 0; -+ mchbar_write8(SC_ROUNDT_LAT_ch(channel) + rank, initial_rt_latency); -+ ctrl->rt_latency[channel][rank] = initial_rt_latency; -+ } -+ -+ printk(BIOS_DEBUG, "Rank %u\n", rank); -+ printk(BIOS_DEBUG, "Steps 1 and 2: Find middle of high region\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\nRcvEn\n"); -+ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint16_t rl_delay = RL_START; rl_delay < RL_STOP; rl_delay += RL_STEP) { -+ printk(RCVEN_PLOT, " % 3d", rl_delay); -+ program_rl_delays(ctrl, rank, rl_delay); -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool high = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, high ? ". " : "# "); -+ phase_record_pass( -+ ®ion_data[channel][byte], -+ high, -+ rl_delay, -+ RL_START, -+ RL_STEP); -+ } -+ } -+ printk(RCVEN_PLOT, "\n"); -+ } -+ printk(RCVEN_PLOT, "\n"); -+ printk(BIOS_DEBUG, "Update RcvEn timing to be in the center of high region\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\n", -+ channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *const curr_data = -+ ®ion_data[channel][byte]; -+ phase_append_current_to_initial(curr_data, RL_START, RL_STEP); -+ const int32_t lwidth = range_width(curr_data->largest); -+ const int32_t center = range_center(curr_data->largest); -+ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\n", -+ byte, -+ curr_data->largest.start, -+ curr_data->largest.end, -+ lwidth, -+ center); -+ -+ status = verify_high_region(center, lwidth); -+ if (status) { -+ printk(BIOS_ERR, -+ "RcvEn problems on channel %u, byte %u\n", -+ channel, byte); -+ goto clean_up; -+ } -+ ctrl->rcven[channel][rank][byte] = center; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+ printk(BIOS_DEBUG, "Step 3: Quarter preamble - Walk backwards\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\nIOLAT\n"); -+ bool done = false; -+ while (!done) { -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, " %2u\t", ctrl->io_latency[channel][rank]); -+ uint16_t highs = 0; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool high = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, high ? "H " : "L "); -+ if (high) -+ highs |= BIT(byte); -+ } -+ if (!highs) -+ continue; -+ -+ done = false; -+ -+ /* If all bytes sample high, adjust timing globally */ -+ if (highs == bytemask && ctrl->io_latency[channel][rank] < 14) { -+ ctrl->io_latency[channel][rank] += 2; -+ ctrl->io_latency[channel][rank] %= 16; -+ program_io_latency(ctrl, channel, rank); -+ continue; -+ } -+ -+ /* Otherwise, adjust individual bytes */ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (!(highs & BIT(byte))) -+ continue; -+ -+ if (ctrl->rcven[channel][rank][byte] < 128) { -+ printk(BIOS_ERR, -+ "RcvEn underflow: walking backwards\n"); -+ printk(BIOS_ERR, -+ "For channel %u, rank %u, byte %u\n", -+ channel, rank, byte); -+ status = RAMINIT_STATUS_RCVEN_FAILURE; -+ goto clean_up; -+ } -+ ctrl->rcven[channel][rank][byte] -= 128; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ printk(RCVEN_PLOT, "\n"); -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "\nC%u: Preamble\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_DEBUG, -+ " B%u: %u\n", byte, ctrl->rcven[channel][rank][byte]); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ -+ printk(BIOS_DEBUG, "Step 4: Add 1 qclk\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ ctrl->rcven[channel][rank][byte] += 64; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ -+ printk(BIOS_DEBUG, "Step 5: Walk forward to find rising edge\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\n inc\n"); -+ uint16_t ch_result[NUM_CHANNELS] = { 0 }; -+ uint8_t inc_preamble[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint8_t inc = 0; inc < 64; inc += fine_step) { -+ printk(RCVEN_PLOT, " %2u\t", inc); -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (ch_result[channel] & BIT(byte)) { -+ /* Skip bytes that are already done */ -+ printk(RCVEN_PLOT, ". "); -+ continue; -+ } -+ const bool pass = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, pass ? ". " : "# "); -+ if (pass) { -+ ch_result[channel] |= BIT(byte); -+ continue; -+ } -+ ctrl->rcven[channel][rank][byte] += fine_step; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ inc_preamble[channel][byte] = inc; -+ } -+ printk(RCVEN_PLOT, "\t"); -+ if (ch_result[channel] != bytemask) -+ done = false; -+ } -+ printk(RCVEN_PLOT, "\n"); -+ if (done) -+ break; -+ } -+ printk(BIOS_DEBUG, "\n"); -+ if (!done) { -+ printk(BIOS_ERR, "Error: Preamble edge not found for all bytes\n"); -+ printk(BIOS_ERR, "The final RcvEn results are as follows:\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_ERR, "Channel %u Rank %u: preamble\n", -+ channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_ERR, " Byte %u: %u%s\n", byte, -+ ctrl->rcven[channel][rank][byte], -+ (ch_result[channel] ^ bytemask) & BIT(byte) -+ ? "" -+ : " *** Check this byte! ***"); -+ } -+ } -+ status = RAMINIT_STATUS_RCVEN_FAILURE; -+ goto clean_up; -+ } -+ -+ printk(BIOS_DEBUG, "Step 6: center on preamble and clean up rank\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u: Preamble increment\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ /* -+ * For Traditional, pull in RcvEn by 64. For ULT, take the DQS -+ * drift into account to the specified guardband: tDQSCK_DRIFT. -+ */ -+ ctrl->rcven[channel][rank][byte] -= tDQSCK_DRIFT; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ printk(BIOS_DEBUG, " B%u: %u %u\n", byte, -+ ctrl->rcven[channel][rank][byte], -+ inc_preamble[channel][byte]); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+clean_up: -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ if (ctrl->lpddr) { -+ /** -+ * W/A for b4618574 - @todo: remove for HSW ULT C0 -+ * Can't have force_odt_on together with leaker, disable LPDDR mode for -+ * this training step. This write will disable force_odt_on while still -+ * keeping LPDDR mode disabled. Second write will restore LPDDR mode. -+ */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.lpddr_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ ctrl->dq_control_2[channel][byte]); -+ } -+ } -+ io_reset(); -+ if (status) -+ return status; -+ -+ printk(BIOS_DEBUG, "Step 7: Sync IO latency across all ranks\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ status = change_rcven_timing(ctrl, channel); -+ if (status) -+ return status; -+ } -+ printk(BIOS_DEBUG, "\nFinal Receive Enable and IO latency settings:\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ const union sc_io_latency_reg sc_io_latency = { -+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), -+ }; -+ printk(BIOS_DEBUG, " C%u.R%u: IOLAT = %u rt_iocomp = %u\n", channel, -+ rank, ctrl->io_latency[channel][rank], sc_io_latency.rt_iocomp); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_DEBUG, " B%u: %u\n", byte, -+ ctrl->rcven[channel][rank][byte]); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ } -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index a81559bb1e..9172d4f2b0 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -18,6 +18,8 @@ - #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) - #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) - -+#define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) -+ - #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) - #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) - -@@ -100,6 +102,7 @@ - #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) - #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) - #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) -+#define SC_IO_LATENCY_ch(ch) _MCMAIN_C(0x4028, ch) - - #define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch) - --- -2.39.2 - |