diff options
Diffstat (limited to 'config/coreboot/haswell/patches/0006-sb-intel-lynxpoint-Add-native-thermal-init.patch')
| -rw-r--r-- | config/coreboot/haswell/patches/0006-sb-intel-lynxpoint-Add-native-thermal-init.patch | 128 |
1 files changed, 0 insertions, 128 deletions
diff --git a/config/coreboot/haswell/patches/0006-sb-intel-lynxpoint-Add-native-thermal-init.patch b/config/coreboot/haswell/patches/0006-sb-intel-lynxpoint-Add-native-thermal-init.patch deleted file mode 100644 index 157d2999..00000000 --- a/config/coreboot/haswell/patches/0006-sb-intel-lynxpoint-Add-native-thermal-init.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 92be49d8422b4bc1c89bb49535f4dc6a01d47295 Mon Sep 17 00:00:00 2001 -From: Angel Pons <th3fanbus@gmail.com> -Date: Fri, 6 May 2022 23:22:11 +0200 -Subject: [PATCH 06/26] sb/intel/lynxpoint: Add native thermal init - -Implement native thermal initialisation for Lynx Point. This is only -needed when MRC.bin is not used. - -Change-Id: I4a67a3092d0c2e56bfdacb513a899ef838193cbd -Signed-off-by: Angel Pons <th3fanbus@gmail.com> ---- - .../haswell/native_raminit/raminit_native.c | 1 + - src/southbridge/intel/lynxpoint/Makefile.inc | 2 +- - src/southbridge/intel/lynxpoint/pch.h | 1 + - src/southbridge/intel/lynxpoint/thermal.c | 64 +++++++++++++++++++ - 4 files changed, 67 insertions(+), 1 deletion(-) - create mode 100644 src/southbridge/intel/lynxpoint/thermal.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -index ef61d4ee09..dd1f1ec14e 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -@@ -16,6 +16,7 @@ static bool early_init_native(int s3resume) - /** TODO: CPU replacement check must be skipped in warm boots and S3 resumes **/ - const bool cpu_replaced = !s3resume && intel_early_me_cpu_replacement_check(); - -+ early_thermal_init(); - early_usb_init(); - - if (!CONFIG(INTEL_LYNXPOINT_LP)) -diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc -index 0e1f2fe4eb..a9a9b153d6 100644 ---- a/src/southbridge/intel/lynxpoint/Makefile.inc -+++ b/src/southbridge/intel/lynxpoint/Makefile.inc -@@ -37,7 +37,7 @@ bootblock-y += early_pch.c - romstage-y += early_usb.c early_me.c me_status.c early_pch.c - romstage-y += pmutil.c - --romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c early_usb_native.c iobp.c -+romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c early_usb_native.c iobp.c thermal.c - - ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y) - romstage-y += lp_gpio.c -diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h -index ad983d86cf..38a9349220 100644 ---- a/src/southbridge/intel/lynxpoint/pch.h -+++ b/src/southbridge/intel/lynxpoint/pch.h -@@ -116,6 +116,7 @@ enum pch_platform_type { - void pch_dmi_setup_physical_layer(void); - void pch_dmi_tc_vc_mapping(u32 vc0, u32 vc1, u32 vcp, u32 vcm); - void early_usb_init(void); -+void early_thermal_init(void); - - void usb_ehci_sleep_prepare(pci_devfn_t dev, u8 slp_typ); - void usb_ehci_disable(pci_devfn_t dev); -diff --git a/src/southbridge/intel/lynxpoint/thermal.c b/src/southbridge/intel/lynxpoint/thermal.c -new file mode 100644 -index 0000000000..e71969ea0c ---- /dev/null -+++ b/src/southbridge/intel/lynxpoint/thermal.c -@@ -0,0 +1,64 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include <device/mmio.h> -+#include <device/pci_ops.h> -+#include <southbridge/intel/lynxpoint/pch.h> -+#include <types.h> -+ -+#define TBARB_TEMP 0x40000000 -+ -+#define THERMAL_DEV PCI_DEV(0, 0x1f, 6) -+ -+/* Early thermal init, it may need to be done prior to giving ME its memory */ -+void early_thermal_init(void) -+{ -+ /* Program address for temporary BAR */ -+ pci_write_config32(THERMAL_DEV, 0x40, TBARB_TEMP); -+ pci_write_config32(THERMAL_DEV, 0x44, 0); -+ -+ /* Activate temporary BAR */ -+ pci_or_config32(THERMAL_DEV, 0x40, 1); -+ -+ /* -+ * BWG section 17.3.1 says: -+ * -+ * ### Initializing Lynx Point Thermal Sensors ### -+ * -+ * The System BIOS must perform the following steps to initialize the Lynx -+ * Point thermal subsystem device, D31:F6. The System BIOS is required to -+ * repeat this process on a resume from Sx. BIOS may enable any or all of -+ * the registers below based on OEM's platform configuration. Intel does -+ * not recommend a value on some of the registers, since each platform has -+ * different temperature trip points and one may enable a trip to cause an -+ * SMI while another platform would cause an interrupt instead. -+ * -+ * The recommended flow for enabling thermal sensor is by setting up various -+ * temperature trip points first, followed by enabling the desired trip -+ * alert method and then enable the actual sensors from TSEL registers. -+ * If this flow is not followed, software will need to take special care -+ * to handle false events during setting up those registers. -+ */ -+ -+ /* Step 1: Program CTT */ -+ write16p(TBARB_TEMP + 0x10, 0x0154); -+ -+ /* Step 2: Clear trip status from TSS and TAS */ -+ write8p(TBARB_TEMP + 0x06, 0xff); -+ write8p(TBARB_TEMP + 0x80, 0xff); -+ -+ /* Step 3: Program TSGPEN and TSPIEN to zero */ -+ write8p(TBARB_TEMP + 0x84, 0x00); -+ write8p(TBARB_TEMP + 0x82, 0x00); -+ -+ /* -+ * Step 4: If thermal reporting to an EC over SMBus is supported, -+ * then write 0x01 to TSREL, else leave at default. -+ */ -+ write8p(TBARB_TEMP + 0x0a, 0x01); -+ -+ /* Disable temporary BAR */ -+ pci_and_config32(THERMAL_DEV, 0x40, ~1); -+ -+ /* Clear temporary BAR address */ -+ pci_write_config32(THERMAL_DEV, 0x40, 0); -+} --- -2.39.2 - |