summaryrefslogtreecommitdiff
path: root/config/coreboot/default/patches
diff options
context:
space:
mode:
Diffstat (limited to 'config/coreboot/default/patches')
-rw-r--r--config/coreboot/default/patches/0042-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch64
1 files changed, 36 insertions, 28 deletions
diff --git a/config/coreboot/default/patches/0042-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch b/config/coreboot/default/patches/0042-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch
index f6bd1940..37353e20 100644
--- a/config/coreboot/default/patches/0042-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch
+++ b/config/coreboot/default/patches/0042-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch
@@ -1,13 +1,13 @@
-From f6340f3fe21e948ba94d0429467882c2fb90b77e Mon Sep 17 00:00:00 2001
+From c58e0fea2a4e591e5ecd8a1f376c3b3af0fbb306 Mon Sep 17 00:00:00 2001
From: Mate Kukri <kukri.mate@gmail.com>
-Date: Sat, 6 Apr 2024 23:25:15 +0100
+Date: Thu, 18 Apr 2024 20:28:45 +0100
Subject: [PATCH 1/1] mb/dell/optiplex_9020: Implement late HWM initialization
There are 4 different chassis types specified by vendor firmware, each
with a slightly different HWM configuration.
The chassis type to use is determined at runtime by reading a set of
-4 PCH GPIOs: 70, 38, 17, and 0.
+4 PCH GPIOs: 70, 38, 17, and 1.
Additionally vendor firmware also provides an option to run the fans at
full speed. This is substituted with a coreboot nvram option in this
@@ -26,10 +26,10 @@ Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
src/mainboard/dell/optiplex_9020/bootblock.c | 25 +-
src/mainboard/dell/optiplex_9020/cmos.default | 1 +
src/mainboard/dell/optiplex_9020/cmos.layout | 5 +-
- src/mainboard/dell/optiplex_9020/mainboard.c | 382 ++++++++++++++++++
+ src/mainboard/dell/optiplex_9020/mainboard.c | 387 ++++++++++++++++++
src/mainboard/dell/optiplex_9020/sch5555_ec.c | 54 +++
- src/mainboard/dell/optiplex_9020/sch5555_ec.h | 7 +
- 7 files changed, 455 insertions(+), 22 deletions(-)
+ src/mainboard/dell/optiplex_9020/sch5555_ec.h | 10 +
+ 7 files changed, 463 insertions(+), 22 deletions(-)
create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.c
create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.h
@@ -119,7 +119,7 @@ index 72ff9c4bee..4a1496a878 100644
# coreboot config options: check sums
984 16 h 0 check_sum
diff --git a/src/mainboard/dell/optiplex_9020/mainboard.c b/src/mainboard/dell/optiplex_9020/mainboard.c
-index c834fea5d3..10b8aaca0e 100644
+index c834fea5d3..0b7829c736 100644
--- a/src/mainboard/dell/optiplex_9020/mainboard.c
+++ b/src/mainboard/dell/optiplex_9020/mainboard.c
@@ -1,7 +1,12 @@
@@ -130,18 +130,19 @@ index c834fea5d3..10b8aaca0e 100644
#include <device/device.h>
#include <drivers/intel/gma/int15.h>
+#include <option.h>
-+#include <southbridge/intel/lynxpoint/lp_gpio.h>
++#include <southbridge/intel/common/gpio.h>
+#include "sch5555_ec.h"
static void mainboard_enable(struct device *dev)
{
-@@ -13,3 +18,380 @@ static void mainboard_enable(struct device *dev)
+@@ -13,3 +18,385 @@ static void mainboard_enable(struct device *dev)
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
+
-+#define HWM_TAB_ADD_TEMP_TARGET 1
++#define HWM_TAB_ADD_TEMP_TARGET 1
+#define HWM_TAB_PKG_POWER_ANY 0xffff
++#define CHASSIS_TYPE_UNKNOWN 0xff
+
+struct hwm_tab_entry {
+ uint16_t addr;
@@ -390,7 +391,7 @@ index c834fea5d3..10b8aaca0e 100644
+
+ // Read chassis type from GPIO
+ gpio_chassis_type = get_gpio(70) << 3 | get_gpio(38) << 2 |
-+ get_gpio(17) << 1 | get_gpio(0);
++ get_gpio(17) << 1 | get_gpio(1);
+
+ printk(BIOS_DEBUG, "GPIO chassis type = %#x\n", gpio_chassis_type);
+
@@ -408,7 +409,7 @@ index c834fea5d3..10b8aaca0e 100644
+ case 0x0f:
+ return 6;
+ default:
-+ die("Unknown GPIO chassis type\n");
++ return CHASSIS_TYPE_UNKNOWN;
+ }
+
+}
@@ -469,9 +470,15 @@ index c834fea5d3..10b8aaca0e 100644
+ ec_write(1, 0x2fc, 0xa0);
+ ec_write(1, 0x2fd, 0x32);
+
-+ // Apply HWM table based on chassis type
+ chassis_type = get_chassis_type();
-+ printk(BIOS_DEBUG, "Chassis type = %#x\n", chassis_type);
++
++ if (chassis_type != CHASSIS_TYPE_UNKNOWN) {
++ printk(BIOS_DEBUG, "Chassis type = %#x\n", chassis_type);
++ } else {
++ printk(BIOS_DEBUG, "WARNING: Unknown chassis type\n");
++ }
++
++ // Apply HWM table based on chassis type
+ switch (chassis_type) {
+ case 3:
+ apply_hwm_tab(HWM_TAB3, ARRAY_SIZE(HWM_TAB3));
@@ -485,19 +492,17 @@ index c834fea5d3..10b8aaca0e 100644
+ case 6:
+ apply_hwm_tab(HWM_TAB6, ARRAY_SIZE(HWM_TAB6));
+ break;
-+ default:
-+ die("Unknown chassis type\n");
+ }
+
-+ if (CONFIG_MAX_CPUS > 2) {
-+ ec_write(1, 0x9e, 0x30);
-+ ec_write(1, 0xeb, ec_read(1, 0xea));
-+ }
++ // NOTE: vendor firmware applies these when "max core address" > 2
++ // i think this is always the case
++ ec_write(1, 0x9e, 0x30);
++ ec_write(1, 0xeb, ec_read(1, 0xea));
+
+ ec_write(1, 0x2fc, saved_2fc);
+
-+ // Apply full speed fan config if requested
-+ if (get_uint_option("fan_full_speed", 0)) {
++ // Apply full speed fan config if requested or if the chassis type is unknown
++ if (chassis_type == CHASSIS_TYPE_UNKNOWN || get_uint_option("fan_full_speed", 0)) {
+ printk(BIOS_DEBUG, "Setting full fan speed\n");
+ ec_write(1, 0x80, 0x60 | ec_read(1, 0x80));
+ ec_write(1, 0x81, 0x60 | ec_read(1, 0x81));
@@ -518,7 +523,7 @@ index c834fea5d3..10b8aaca0e 100644
+BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_EXIT, sch5555_ec_hwm_init, NULL);
diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.c b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
new file mode 100644
-index 0000000000..92244da9ab
+index 0000000000..a1067ac063
--- /dev/null
+++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
@@ -0,0 +1,54 @@
@@ -546,7 +551,7 @@ index 0000000000..92244da9ab
+ outb(1, SCH555x_EMI_IOBASE);
+
+ // wait for ack
-+ for (size_t timeout = 0; timeout < 0xfff; ++timeout)
++ for (size_t retry = 0; retry < 0xfff; ++retry)
+ if (inb(SCH555x_EMI_IOBASE + 1) & 1)
+ break;
+
@@ -572,23 +577,26 @@ index 0000000000..92244da9ab
+ outb(1, SCH555x_EMI_IOBASE);
+
+ // wait for ack
-+ for (size_t timeout = 0; timeout < 0xfff; ++timeout)
++ for (size_t retry = 0; retry < 0xfff; ++retry)
+ if (inb(SCH555x_EMI_IOBASE + 1) & 1)
+ break;
+}
diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.h b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
new file mode 100644
-index 0000000000..6e703ff865
+index 0000000000..7e399e8e74
--- /dev/null
+++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
-@@ -0,0 +1,7 @@
+@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
-+#pragma once
++#ifndef __SCH5555_EC_H__
++#define __SCH5555_EC_H__
+
+uint8_t ec_read(uint8_t addr1, uint16_t addr2);
+
+void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val);
++
++#endif
--
2.39.2