summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xbuild14
-rw-r--r--config/data/coreboot/build.list1
-rw-r--r--config/data/coreboot/mkhelper.cfg11
-rw-r--r--config/data/pico-serprog/mkhelper.cfg5
-rw-r--r--config/data/stm32-vserprog/mkhelper.cfg4
-rwxr-xr-xinclude/lib.sh1
-rw-r--r--include/rom.sh122
-rwxr-xr-xinclude/vendor.sh2
-rwxr-xr-xscript/roms190
-rwxr-xr-xscript/trees42
10 files changed, 170 insertions, 222 deletions
diff --git a/build b/build
index 91843d3f..d03960c6 100755
--- a/build
+++ b/build
@@ -16,7 +16,7 @@ fi
. "include/vendor.sh"
. "include/mrc.sh"
-eval `setvars "" vdir src_dirname srcdir mode xp`
+eval `setvars "" vdir src_dirname srcdir mode xp ser`
err="fail"
main()
@@ -34,6 +34,12 @@ main()
release) shift 1; mkrelease $@ ;;
inject) shift 1; vendor_inject $@ ;;
download) shift 1; vendor_download $@ ;;
+ roms)
+ if [ $# -gt 1 ] && [ "$2" = "serprog" ]; then
+ x_ ./update trees -b stm32-vserprog
+ x_ ./update trees -b pico-serprog; return 0
+ fi; shift 1
+ x_ ./update trees -b coreboot $@ ;;
*)
[ -f "$spath" ] || $err "bad command"
shift 1; "$spath" $@ || $err "excmd: $spath $@" ;;
@@ -111,9 +117,9 @@ build_release()
(
cd "$srcdir" || $err "$vdir: 2 !cd \"$srcdir\""
- ./build roms all || $err "$vdir: roms-all"
- ./build roms serprog rp2040 || $err "$vdir: rp2040"
- ./build roms serprog stm32 || $err "$vdir: stm32"
+ ./update trees -b coreboot || $err "$vdir: roms-all"
+ ./update trees -b pico-serprog || $err "$vdir: rp2040"
+ ./update trees -b stm32-vserprog || $err "$vdir: stm32"
x_ mv bin ../roms
) || $err "can't build rom images"
diff --git a/config/data/coreboot/build.list b/config/data/coreboot/build.list
deleted file mode 100644
index f6535149..00000000
--- a/config/data/coreboot/build.list
+++ /dev/null
@@ -1 +0,0 @@
-build/coreboot.rom
diff --git a/config/data/coreboot/mkhelper.cfg b/config/data/coreboot/mkhelper.cfg
index a6605672..c23ebdf4 100644
--- a/config/data/coreboot/mkhelper.cfg
+++ b/config/data/coreboot/mkhelper.cfg
@@ -1,2 +1,13 @@
makeargs="UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS"
build_depend="seabios/default grub/default memtest86plus"
+
+seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
+
+pv="payload_uboot payload_seabios payload_memtest payload_grub"
+v="initmode ubootelf grub_scan_disk uboot_config grubtree grubelf pname"
+v="$v displaymode tmprom"
+eval `setvars "n" $pv`
+eval `setvars "" $v`
+
+mkhelper="mkcorebootbin"
+postmake="mkcoreboottar"
diff --git a/config/data/pico-serprog/mkhelper.cfg b/config/data/pico-serprog/mkhelper.cfg
new file mode 100644
index 00000000..9f6e54cc
--- /dev/null
+++ b/config/data/pico-serprog/mkhelper.cfg
@@ -0,0 +1,5 @@
+sersrc="src/pico-serprog"
+serx="$sersrc/build/pico_serprog.uf2"
+picosdk="src/pico-sdk"
+serdir="$picosdk/src/boards/include/boards"
+premake="mkserprog rp2040"
diff --git a/config/data/stm32-vserprog/mkhelper.cfg b/config/data/stm32-vserprog/mkhelper.cfg
new file mode 100644
index 00000000..9d02f799
--- /dev/null
+++ b/config/data/stm32-vserprog/mkhelper.cfg
@@ -0,0 +1,4 @@
+sersrc="src/stm32-vserprog"
+serx="$sersrc/stm32-vserprog.hex"
+serdir="$sersrc/boards"
+mkhelper="mkserprog stm32"
diff --git a/include/lib.sh b/include/lib.sh
index e6a998d2..52187734 100755
--- a/include/lib.sh
+++ b/include/lib.sh
@@ -10,7 +10,6 @@ _ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
kbnotice="Insert a .gkb file from config/data/grub/keymap/ as keymap.gkb \
if you want a custom keymap in GRUB; use cbfstool from elf/cbfstool."
-cbelfdir="elf/.coreboot_nopayload_DO_NOT_FLASH"
ifdtool="elf/ifdtool/default/ifdtool"
cbfstool="elf/cbfstool/default/cbfstool"
tmpgit="$PWD/tmp/gitclone"
diff --git a/include/rom.sh b/include/rom.sh
new file mode 100644
index 00000000..7ffd685d
--- /dev/null
+++ b/include/rom.sh
@@ -0,0 +1,122 @@
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
+# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
+# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
+# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
+# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
+
+mkserprog()
+{
+ basename -as .h "$serdir/"*.h > "$TMPDIR/ser" || $err "!mk $1 $TMPDIR"
+
+ while read -r sertarget; do
+ [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$sertarget" \
+ -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" \
+ && x_ cmake --build "$sersrc/build"
+ [ "$1" = "stm32" ] && x_ make -C "$sersrc" \
+ libopencm3-just-make BOARD=$sertarget && x_ make -C \
+ "$sersrc" BOARD=$sertarget; x_ mkdir -p "bin/serprog_$1"
+ x_ mv "$serx" "bin/serprog_$1/serprog_$sertarget.${serx##*.}"
+ done < "$TMPDIR/ser"
+
+ [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0
+}
+
+mkpayload_grub()
+{
+ eval `setvars "" grub_modules grub_install_modules`
+ eval `setcfg "$grubdata/module/$tree"`
+
+ x_ rm -f "$cdir/grub.elf"
+
+ "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \
+ -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \
+ --fonts= --themes= --locales= --modules="$grub_modules" \
+ --install-modules="$grub_install_modules" \
+ "/boot/grub/grub_default.cfg=${cdir}/.config" \
+ "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
+ "/background.png=$grubdata/background/background1280x800.png" || \
+ $err "$tree: cannot build grub.elf"; return 0
+}
+
+mkcorebootbin()
+{
+ [ "$target" = "$tree" ] && return 0
+
+ tmprom="$cdir/build/coreboot.rom"
+ initmode="${defconfig##*/}"; displaymode="${initmode##*_}"
+ initmode="${initmode%%_*}"
+ [ -n "$displaymode" ] && displaymode="_$displaymode"
+ cbfstool="elf/cbfstool/$tree/cbfstool"
+
+ [ -n "$uboot_config" ] || uboot_config="default"
+ [ "$payload_uboot" = "y" ] || payload_seabios="y"
+ [ "$payload_grub" = "y" ] && payload_seabios="y"
+ [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
+ $err "$target: U-Boot and SeaBIOS/GRUB are both enabled."
+
+ [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
+
+ [ -n "$grubtree" ] || grubtree="default"
+ grubelf="elf/grub/$grubtree/payload/grub.elf"
+
+ [ "$payload_memtest" = "y" ] || payload_memtest="n"
+ [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
+
+ x_ ./update trees -b coreboot utils $tree
+
+ [ "$payload_seabios" = "y" ] && pname="seabios" && add_seabios
+ [ "$payload_uboot" = "y" ] && pname="uboot" && add_uboot
+
+ newrom="bin/$target/${pname}_${target}_$initmode$displaymode.rom"
+ x_ mkdir -p "${newrom%/*}"; x_ mv "$tmprom" "$newrom"
+
+ [ "$XBMK_RELEASE" = "y" ] || return 0
+ mksha512sum "$newrom" "vendorhashes"
+ ./vendor inject -r "$newrom" -b "$target" -n nuke || $err "!n $newrom"
+}
+
+add_seabios()
+{
+ _seabioself="elf/seabios/default/$initmode/bios.bin.elf"
+
+ cbfs "$tmprom" "$_seabioself" "fallback/payload"
+ x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
+
+ _z="2"; [ "$initmode" = "vgarom" ] && _z="0"
+ x_ "$cbfstool" "$tmprom" add-int -i $_z -n etc/pci-optionrom-exec
+ x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
+ [ "$initmode" = "libgfxinit" ] && \
+ cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
+
+ [ "$payload_memtest" = "y" ] && cbfs "$tmprom" \
+ "elf/memtest86plus/memtest.bin" img/memtest
+
+ [ "$payload_grub" = "y" ] && pname="seagrub" && add_grub; return 0
+}
+
+add_grub()
+{
+ cbfs "$tmprom" "$grubelf" "img/grub2"
+ printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
+ > "$TMPDIR/tmpcfg" || $err "$target: !insert scandisk"
+ cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
+ cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
+}
+
+add_uboot()
+{
+ ubdir="elf/u-boot/$target/$uboot_config"
+ ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
+ ubootelf="$ubdir/u-boot"
+ [ -f "$ubootelf" ] || $err "cb/$target: Can't find u-boot"
+
+ cbfs "$tmprom" "$ubootelf" "fallback/payload"
+}
+
+mkcoreboottar()
+{
+ [ "$target" = "$tree" ] && return 0
+ [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$target"; return 0
+}
diff --git a/include/vendor.sh b/include/vendor.sh
index e282eedd..75f7e051 100755
--- a/include/vendor.sh
+++ b/include/vendor.sh
@@ -248,7 +248,7 @@ detect_board()
path="$1"
filename="$(basename "$path")"
case "$filename" in
- grub_*) board="$(echo "$filename" | cut -d '_' -f2-3)" ;;
+ grub_*|seagrub_*) board="$(echo "$filename" | cut -d '_' -f2-3)" ;;
seabios_withgrub_*)
board="$(echo "$filename" | cut -d '_' -f3-4)" ;;
*.tar.xz)
diff --git a/script/roms b/script/roms
deleted file mode 100755
index 14822339..00000000
--- a/script/roms
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
-# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-
-set -u -e
-
-. "include/lib.sh"
-
-tmprom="$TMPDIR/rom"
-
-seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
-cfgsdir="config/coreboot"
-rp2040src="src/pico-serprog"
-rp2040x="$rp2040src/build/pico_serprog.uf2"
-picosdk="src/pico-sdk"
-rp2040dir="$picosdk/src/boards/include/boards"
-stm32src="src/stm32-vserprog"
-stm32x="$stm32src/stm32-vserprog.hex"
-stm32dir="$stm32src/boards"
-
-# Disable all payloads by default.
-# target.cfg files have to specifically enable [a] payload(s)
-pv="payload_uboot payload_seabios payload_memtest payload_grub"
-v="romdir initmode displaymode targetdir tree release ubootelf"
-v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv"
-eval `setvars "n" $pv`
-eval `setvars "" $v boards targets serdir ser`
-
-main()
-{
- while [ $# -gt 0 ]; do
- if [ "$1" = "serprog" ]; then
- [ $# -lt 2 ] && $err "serprog type not set"
- [ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \
- $err "invalid serprog type"
- eval "x_ ./update trees -f \"\${${2}src##*/}\""
- ser="$2" && shift 2 && continue
- fi
- [ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return 0
- [ "$1" = "all" ] && shift 1 && continue
- boards="$1 $boards"; shift 1
- done
-
- [ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \
- config/coreboot)" || $err "can't list coreboot boards"
-
- [ -n "$ser" ] && \
- eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\""
- [ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")"
-
- for x in $boards; do
- [ -n "$ser" ] && mkserprogfw "$ser" "$x"
- [ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \
- configure_target "$x" && build_roms && \
- [ -d "bin/$board" ] && targets="$targets, $x" && \
- [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x"
- done
-
- [ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \
- mkrom_tarball "bin/serprog_$ser" && return 0
-
- [ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled"
- [ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }"
- [ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser"
- printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice"
-}
-
-mkserprogfw()
-{
- x_ mkdir -p "bin/serprog_$1"
- [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \
- -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \
- x_ cmake --build "$rp2040src/build"
- [ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \
- BOARD=$2 && x_ make -C "$stm32src" BOARD=$2
- eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\""
-}
-
-serlist()
-{
- basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
-}
-
-configure_target()
-{
- eval `setvars "n" $pv`
- eval `setvars "" $v`
-
- board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board"
-
- # Override the above defaults using target.cfg
- eval `setcfg "$targetdir/target.cfg"`
-
- [ -z "$tree" ] && $err "$board: tree not defined"
- [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1
- [ "$board" = "$tree" ] && return 1
-
- x_ ./update trees -b coreboot $board
-
- cbfstool="elf/cbfstool/$tree/cbfstool"
- x_ ./update trees -b coreboot utils $tree
-
- [ -n "$uboot_config" ] || uboot_config="default"
- [ "$payload_uboot" = "y" ] || payload_seabios="y"
- [ "$payload_grub" = "y" ] && payload_seabios="y"
- [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
- $err "$board: U-Boot and SeaBIOS/GRUB are both enabled."
-
- [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
-
- [ -n "$grubtree" ] || grubtree="default"
- grubelf="elf/grub/$grubtree/payload/grub.elf"
-
- [ "$payload_memtest" = "y" ] || payload_memtest="n"
- [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0
-}
-
-build_roms()
-{
- x_ rm -Rf "$romdir"
-
- for cbcfg in "$targetdir/config/"*; do
- [ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \
- && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt"
- initmode="${cn%%_*}"; chkvars initmode displaymode
- e "$cbcfg" f not || add_payloads
- done; x_ rm -f "$tmprom"
-}
-
-add_payloads()
-{
- cbuild="$cbelfdir/$board/${initmode}_$displaymode"
- [ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}"
- x_ cp "$cbuild/coreboot.rom" "$tmprom"
-
- [ "$payload_seabios" = "y" ] && add_seabios_payload
- [ "$payload_uboot" = "y" ] || return 0
-
- ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \
- && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot"
- [ -f "$ubootelf" ] || $err "$board: Can't find u-boot"
-
- cbfs "$tmprom" "$ubootelf" "fallback/payload"
- cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
-}
-
-add_seabios_payload()
-{
- _seabioself="elf/seabios/default/$initmode/bios.bin.elf"
-
- pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub"
- newrom="$romdir/${pstr}_${board}_$initmode.rom"
- [ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom"
-
- cbfs "$tmprom" "$_seabioself" "fallback/payload"
- x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
-
- z="2"; [ "$initmode" = "vgarom" ] && z="0"
- x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
- x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
- [ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \
- vgaroms/seavgabios.bin raw
-
- if [ "$payload_grub" = "y" ]; then
- cbfs "$tmprom" "$grubelf" "img/grub2"
- printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
- > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk"
- cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
- fi
-
- [ "$payload_memtest" = "y" ] && \
- cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest
-
- cprom "$newrom" && [ "$payload_grub" = "y" ] && \
- cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \
- cprom "${newrom%.rom}_grubfirst.rom"; return 0
-}
-
-cprom()
-{
- x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1"
- [ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \
- x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0
-}
-
-main $@
diff --git a/script/trees b/script/trees
index ab321869..8bcd798c 100755
--- a/script/trees
+++ b/script/trees
@@ -8,10 +8,15 @@ set -u -e
. "include/lib.sh"
. "include/git.sh"
+. "include/rom.sh"
+
+. "config/data/pico-serprog/mkhelper.cfg"
+. "config/data/coreboot/mkhelper.cfg"
eval `setvars "" xarch cdir defconfig cmakedir xlang mode makeargs elfdir cmd \
project target target_dir targets xtree _f target1 bootstrapargs mkhelper \
- autoconfargs listfile autogenargs btype tree rev tree_depend build_depend`
+ autoconfargs listfile autogenargs btype tree rev tree_depend build_depend \
+ premake release postmake`
main()
{
@@ -46,6 +51,7 @@ main()
datadir="config/data/$project"
cfgsdir="config/$project"
listfile="$datadir/build.list" # needed on multi, optional on single
+ [ -f "$listfile" ] || listfile="" # optional on all projects
remkdir "${tmpgit%/*}"
@@ -61,7 +67,6 @@ main()
build_project()
{
configure_project "$cfgsdir" || return 0
- [ -f "$listfile" ] || listfile="" # optional on single-tree
dest_dir="$elfdir"
[ ! -f "$listfile" ] || elfcheck || return 0
@@ -77,10 +82,7 @@ build_project()
build_targets()
{
- [ "$elfdir" = "elf/coreboot" ] && elfdir="$cbelfdir"
-
[ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist"
- [ -f "$listfile" ] || $err "list file, $listfile, does not exist"
# Build for all targets if no argument is given
[ $# -gt 0 ] && target1="$1"
@@ -94,12 +96,16 @@ build_targets()
handle_targets()
{
for x in $targets; do
+ [ "$x" = "list" ] && x_ ls -1 "config/$project" && \
+ listfile="" && break
target="$x"
printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target"
[ "$project" != "coreboot" ] || [ -n "$mode" ] || \
[ "$target1" = "utils" ] || x_ ./vendor download $target
x_ handle_defconfig
- done
+ [ -n "$mode" ] || [ -z "$postmake" ] || $postmake || \
+ $err "$project/$target: !postmake: $postmake"; continue
+ done; return 0
}
handle_defconfig()
@@ -141,8 +147,8 @@ handle_src_tree()
configure_project()
{
- eval `setvars "" xarch xlang bootstrapargs autoconfargs xtree \
- tree_depend makeargs btype mkhelper build_depend`
+ eval `setvars "" xarch xlang build_depend autoconfargs xtree postmake \
+ tree_depend makeargs btype mkhelper bootstrapargs premake release`
[ -f "$1/target.cfg" ] || btype="auto"
[ -f "$datadir/mkhelper.cfg" ] && eval `setcfg "$datadir/mkhelper.cfg"`
@@ -159,6 +165,7 @@ configure_project()
&& break; _tcfg="${_tcfg%/*/target.cfg}/$tree/target.cfg"
done
+ [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1
[ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || return 1
[ -z "$mode" ] && for bd in $build_depend; do
@@ -244,6 +251,8 @@ handle_makefile()
run_make_command()
{
+ [ -z "$premake" ] || [ -n "$mode" ] || $premake || $err "!$premake"
+
check_cmake "$cdir" && [ -z "$mode" ] && check_autoconf "$cdir"
check_makefile "$cdir" || return 1
@@ -280,23 +289,6 @@ check_makefile()
[ -f "$1/GNUmakefile" ] || return 1; return 0
}
-mkpayload_grub()
-{
- eval `setvars "" grub_modules grub_install_modules`
- eval `setcfg "$grubdata/module/$tree"`
-
- x_ rm -f "$cdir/grub.elf"
-
- "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \
- -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \
- --fonts= --themes= --locales= --modules="$grub_modules" \
- --install-modules="$grub_install_modules" \
- "/boot/grub/grub_default.cfg=${cdir}/.config" \
- "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
- "/background.png=$grubdata/background/background1280x800.png" || \
- $err "$tree: cannot build grub.elf"; return 0
-}
-
copy_elf()
{
[ -f "$listfile" ] && x_ mkdir -p "$dest_dir" && while read -r f; do