put all src downloads under src/

build/release/src was partly re-written to accomodate this

memtest86plus was patched to have a central Makefile, and
lbmk modified to use that, rather than mess with build32
and build64. the central Makefile just builds both targets
or cleans both targets

Signed-off-by: Leah Rowe <leah@libreboot.org>

6 files changed, 72 insertions, 81 deletions

diff --git a/script/update/blobs/inject b/script/update/blobs/inject
index 96ee0002..d778fe78 100755
--- a/script/update/blobs/inject
+++ b/script/update/blobs/inject
@@ -34,7 +34,6 @@ main()
 
 	printf "Friendly reminder (this is *not* an error message):\n"
 	printf "Please always ensure that the files were inserted correctly.\n"
-	printf "Read: https://libreboot.org/docs/install/ivy_has_common.html\n"
 }
 
 check_board()
@@ -187,8 +186,7 @@ inject_blob_intel_mrc()
 
 	printf "adding mrc\n"
 
-	# mrc.bin must be inserted at a specific offset. the only
-	# libreboot platform that needs it, at present, is haswell
+	# mrc.bin must be inserted at a specific offset
 
 	# in cbfstool, -b values above 0x80000000 are interpreted as
 	# top-aligned x86 memory locations. this is converted into an
@@ -197,7 +195,7 @@ inject_blob_intel_mrc()
 
 	# coreboot's own build system hardcodes the mrc.bin offset
 	# because there is only one correct location in memory, but
-	# it would be useful for lbmk if it could be easily scanned
+	# it would be useful for us if it could be easily scanned
 	# from Kconfig, with the option to change it where in practise
 	# it is not changed
 
@@ -217,7 +215,7 @@ inject_blob_intel_me()
 	[ -z ${CONFIG_ME_BIN_PATH} ] && \
 		err "inject_blob_intel_me: CONFIG_ME_BIN_PATH not set"
 
-	_me_location=${CONFIG_ME_BIN_PATH#../../}
+	_me_location=${CONFIG_ME_BIN_PATH##*../}
 	[ ! -f "${_me_location}" ] && \
 		err "inject_blob_intel_me: per CONFIG_ME_BIN_PATH: file missing"
 
@@ -228,9 +226,9 @@ inject_blob_hp_kbc1126_ec()
 {
 	rom="${1}"
 
-	_ec1_location="${CONFIG_KBC1126_FW1#../../}"
+	_ec1_location="${CONFIG_KBC1126_FW1##*../}"
 	_ec1_offset="${CONFIG_KBC1126_FW1_OFFSET}"
-	_ec2_location="${CONFIG_KBC1126_FW2#../../}"
+	_ec2_location="${CONFIG_KBC1126_FW2##*../}"
 	_ec2_offset="${CONFIG_KBC1126_FW2_OFFSET}"
 
 	printf "adding hp kbc1126 ec firmware\n"
@@ -253,7 +251,7 @@ inject_blob_dell_e6400_vgarom_nvidia()
 {
 	rom="${1}"
 
-	_vga_location="${CONFIG_VGA_BIOS_FILE#../../}"
+	_vga_location="${CONFIG_VGA_BIOS_FILE##*../}"
 	_vga_dir="${_vga_location%/*}"
 	_vga_filename="${_vga_location##*/}"
 
@@ -271,7 +269,7 @@ inject_blob_dell_e6400_vgarom_nvidia()
 inject_blob_smsc_sch5545_ec()
 {
 	rom="${1}"
-	_sch5545ec_location="${CONFIG_SMSC_SCH5545_EC_FW_FILE#../../}"
+	_sch5545ec_location="${CONFIG_SMSC_SCH5545_EC_FW_FILE##*../}"
 	[ -f "${_sch5545ec_location}" ] || \
 		err "inject_blob_smsc_sch5545_ec: SCH5545 fw missing"
 
@@ -286,7 +284,7 @@ modify_gbe()
 		err "modify_gbe: ${board}: CONFIG_GBE_BIN_PATH not set"
 
 	rom="${1}"
-	_gbe_location=${CONFIG_GBE_BIN_PATH#../../}
+	_gbe_location=${CONFIG_GBE_BIN_PATH##*../}
 	[ -f "${_gbe_location}" ] || \
 		err "modify_gbe: CONFIG_GBE_BIN_PATH points to missing file"
 	[ -f "${nvmutil}" ] || \
diff --git a/script/update/project/build b/script/update/project/build
index 2c6eff97..69c11105 100755
--- a/script/update/project/build
+++ b/script/update/project/build
@@ -33,7 +33,7 @@ main()
 		-x) mode="crossgcc-clean" ;;
 		*) err "Invalid option" ;;
 		esac
-		shift; project="${OPTARG}"; shift
+		shift; project="${OPTARG#src/}"; shift
 	done
 	[ -z ${_f} ] && err "flag not specified (-m, -u, -b, -c or -x)"
 	[ -z ${project} ] && err "project name not specified"
@@ -48,15 +48,13 @@ main()
 build_projects()
 {
 	[ $# -gt 0 ] && x_ ./update project build ${_f} ${@}
-	codedir="${project}"
+	codedir="src/${project}"
 
-	[ -d "${codedir}" ] || x_ ./update project repo "${codedir%/*}"
-	[ -d "${codedir}" ] || \
-		err "build_targets: ${codedir%/*} not downloaded"
+	[ -d "${codedir}" ] || x_ ./update project repo "${project}"
 
 	if [ "${project}" = "uefitool" ]; then
 	(
-		x_ cd uefitool
+		x_ cd src/uefitool
 		cmake UEFIExtract/ || [ -f Makefile ] || \
 		    err "build_targets: !cmake UEFIExtract/"
 	)
@@ -138,7 +136,7 @@ handle_src_tree()
 	[ -z ${arch} ] && \
 		err "handle_src_tree: ${target_dir}: undefined cpu type"
 
-	codedir="${project}/${tree}"
+	codedir="src/${project}/${tree}"
 	if [ ! -d "${codedir}" ]; then
 		if [ "${mode}" = "distclean" ] || \
 		    [ "${mode}" = "crossgcc-clean" ]; then
@@ -171,13 +169,14 @@ check_cross_compiler()
 	[ "${crossgcc_ada}" != "y" ] && \
 		export BUILD_LANGUAGES=c
 
-	cbdir="coreboot/${tree}"
+	cbdir="src/coreboot/${tree}"
 	[ "${project}" != "coreboot" ] && \
-		cbdir="coreboot/default" # not u-boot (e.g. linux will use it)
+		cbdir="src/coreboot/default" # not u-boot (e.g. linux)
 	[ "${project}" = "u-boot" ] && \
-		cbdir="coreboot/cros" # u-boot only used on coreboot/cros
+		cbdir="src/coreboot/cros" # u-boot only used on coreboot/cros
+
 	# only true if not building coreboot:
-	ctarget="${cbdir#coreboot/}"
+	ctarget="${cbdir#src/coreboot/}"
 	[ -d "${cbdir}" ] || \
 		x_ ./update project trees coreboot ${ctarget}
 
diff --git a/script/update/project/repo b/script/update/project/repo
index 71c3940c..df522edc 100755
--- a/script/update/project/repo
+++ b/script/update/project/repo
@@ -16,7 +16,7 @@ main()
 	[ $# -gt 0 ] || fail "no argument given"
 
 	[ -z "${1+x}" ] && fail 'main(): name not set'
-	name=${1}
+	name=${1#src/}
 
 	scan_config "${name}" "config/git" "fail"
 	verify_config
@@ -40,6 +40,9 @@ clone_project()
 	xx_ rm -Rf "${tmp_dir}"
 	xx_ mkdir -p "${tmp_dir%/*}"
 
+	loc="${loc#src/}"
+	loc="src/${loc}"
+
 	git clone ${url} "${tmp_dir}" || git clone ${bkup_url} "${tmp_dir}" || \
 	    fail "clone_project: could not download ${name}"
 	git_reset_rev "${tmp_dir}" "${rev}" "fail" || \
@@ -47,8 +50,7 @@ clone_project()
 	git_am_patches "${tmp_dir}" "${PWD}/config/${name}/patches" "fail" || \
 	    fail "clone_project ${loc}/: cannot apply patches"
 
-	[ ! -d "${loc}" ] || \
-		xx_ rm -Rf "${loc}"
+	xx_ rm -Rf "${loc}"
 	[ "${loc}" = "${loc%/*}" ] || xx_ mkdir -p ${loc%/*}
 	xx_ mv "${tmp_dir}" "${loc}"
 }
diff --git a/script/update/project/trees b/script/update/project/trees
index 29004760..4b25d5b9 100755
--- a/script/update/project/trees
+++ b/script/update/project/trees
@@ -15,13 +15,13 @@ eval "$(setvars "" _target tree rev project cfgsdir _xm)"
 
 main()
 {
-	printf "Downloading %s and applying patches\n" ${project}
-
 	[ -z "${1}" ] && err "project name not specified"
-	project="${1}" && shift 1
+	project="${1#src/}" && shift 1
 
 	configure_targets $@
 
+	printf "Downloading %s and applying patches\n" ${project}
+
 	for x in ${targets}; do
 		x_ rm -f "${cfgsdir}/"*/seen
 		download_for_target "${x}"
@@ -45,8 +45,9 @@ download_for_target()
 	_target="${1}"
 
 	fetch_config
-	[ -d "${project}/${tree}" ] && printf "download/%s %s (%s): exists\n" \
-	    "${project}" "${tree}" "${_target}" 1>&2 && return 0
+	[ -d "src/${project}/${tree}" ] && \
+		printf "download/%s %s (%s): exists\n" \
+		    "${project}" "${tree}" "${_target}" 1>&2 && return 0
 
 	fetch_from_upstream
 	prepare_new_tree
@@ -83,9 +84,9 @@ check_config_for_target()
 
 fetch_from_upstream()
 {
-	[ -d "${project}" ] || x_ mkdir -p "${project}"
-	[ -d "${project}/${project}" ] && return 0
+	[ -d "src/${project}/${project}" ] && return 0
 
+	x_ mkdir -p "src/${project}"
 	x_ ./update project repo "${project}"
 }
 
@@ -93,14 +94,14 @@ prepare_new_tree()
 {
 	printf "Creating %s tree %s (%s)\n" "${project}" "${tree}" "${_target}"
 
-	x_ cp -R "${project}/${project}" "${project}/${tree}"
-	x_ git_reset_rev "${project}/${tree}" "${rev}" "err"
+	x_ cp -R "src/${project}/${project}" "src/${project}/${tree}"
+	x_ git_reset_rev "src/${project}/${tree}" "${rev}" "err"
 	(
-	x_ cd "${project}/${tree}"
+	x_ cd "src/${project}/${tree}"
 	git submodule update --init --checkout || \
 	    err "prepare_new_tree ${project}/${tree}: can't update git modules"
 	)
-	git_am_patches "${PWD}/${project}/${tree}" \
+	git_am_patches "${PWD}/src/${project}/${tree}" \
 	    "${PWD}/${cfgsdir}/${tree}/patches" "err"
 }
 
diff --git a/script/update/release/roms b/script/update/release/roms
index 3cf5d93e..e4d5db4f 100755
--- a/script/update/release/roms
+++ b/script/update/release/roms
@@ -104,7 +104,7 @@ make_archive()
 strip_archive()
 {
 	romdir=${1}
-	[ -d "coreboot/${tree}" ] || \
+	[ -d "src/coreboot/${tree}" ] || \
 		x_ ./update project trees coreboot ${tree}
 
 	x_ ./build coreboot utils ${tree}
diff --git a/script/update/release/src b/script/update/release/src
index 3a966015..689a23ab 100755
--- a/script/update/release/src
+++ b/script/update/release/src
@@ -14,9 +14,9 @@ simple_fetch_list="flashrom grub memtest86plus me_cleaner uefitool"
 simple_fetch_list="${simple_fetch_list} bios_extract biosutilities"
 download_only_list="pico-serprog stm32-vserprog"
 
-dirlist="config util script include util-fw"
-linklist="build update handle" # symlinks in main directory, to script: lbmk
-filelist="lbmk README.md COPYING version versiondate projectname"
+dirlist="config util script include"
+linklist="update" # symlinks in main directory, to script: lbmk
+filelist="build README.md COPYING version versiondate projectname .gitignore"
 
 version="version-unknown"
 versiondate="version-date-unknown"
@@ -44,54 +44,39 @@ create_release_directory()
 	dirname="${projectname}-${version}_src"
 	srcdir="${reldir}/${dirname}"
 
-	[ -d "release/" ] || x_ mkdir -p release/
-	[ -d "${reldir}/" ] || x_ mkdir -p "${reldir}/"
-	[ ! -d "${srcdir}/" ] || x_ rm -Rf "${srcdir}/"
-	[ ! -f "${srcdir}.tar.xz" ] || \
-		x_ rm -f "${srcdir}.tar.xz/"
-
-	x_ mkdir -p "${srcdir}/"
-	x_ printf "%s" "${version}" > "${srcdir}"/version
+	xx_ mkdir -p "${reldir}"
+	xx_ rm -Rf "${srcdir}" "${srcdir}.tar.xz"
+	xx_ mkdir -p "${srcdir}"
 }
 
 download_modules()
 {
 	for modname in ${trees_fetch_list}; do
-		[ -d "${modname}" ] || x_ ./update project trees ${modname}
+		[ -d "src/${modname}" ] || xx_ ./update project trees ${modname}
 	done
 	for modname in ${simple_fetch_list} ${download_only_list}; do
-		[ -d "${modname}/" ] || x_ ./update project repo ${modname}
+		[ -d "src/${modname}/" ] || xx_ ./update project repo ${modname}
 	done
 }
 
 copy_files()
 {
+	xx_ cp -R "src" "${srcdir}/src"
 	for dir in ${trees_fetch_list}; do
-		[ -d "${dir}" ] || continue
-		for subdir in "${dir}"/*; do
-			[ -d "${subdir}" ] || continue
-			[ "${subdir##*/}" = "${dir}" ] && continue
-			x_ mkdir -p "${srcdir}/${dir}"
-			[ ! -d "${srcdir}/${dir}/${subdir##*/}" ] || \
-			    x_ rm -Rf "${srcdir}/${dir}/${subdir##*/}"
-			x_ cp -R "${subdir}" "${srcdir}/${dir}/${subdir##*/}"
-		done
+		xx_ rm -Rf "${srcdir}/src/${dir}/${dir}"
 	done
-	for dir in ${simple_fetch_list} ${dirlist}; do
-		x_ cp -R "${dir}/" "${srcdir}/"
+	for dir in ${dirlist}; do
+		xx_ cp -R "${dir}/" "${srcdir}/"
 	done
 
 	for i in ${filelist}; do
-		if [ ! -f "${i}" ]; then
-			x_ rm -Rf "${srcdir}"
-			err "copy_files: file '${i}' does not exist"
-		fi
-		x_ cp "${i}" "${srcdir}/"
+		[ -f "${i}" ] || fail "copy_files: '${i}' does not exist"
+		xx_ cp "${i}" "${srcdir}/"
 	done
 	(
-	x_ cd "${srcdir}/"
+	xx_ cd "${srcdir}/"
 	for i in ${linklist}; do
-		x_ ln -s lbmk "${i}"
+		xx_ ln -s build "${i}"
 	done
 	)
 }
@@ -99,30 +84,36 @@ copy_files()
 purge_files()
 {
 	(
-	x_ cd "${srcdir}/"
-	[ ! -d "coreboot/default/util/kbc1126" ] || \
-		x_ ./update project build -c "coreboot/default/util/kbc1126"
-	x_ ./update project build -x coreboot
+	xx_ cd "${srcdir}"
+	[ ! -d "src/coreboot/default/util/kbc1126" ] || \
+	    xx_ ./update project build -c "src/coreboot/default/util/kbc1126"
+	xx_ ./update project build -x coreboot
 	for p in u-boot seabios coreboot; do
-		x_ ./update project build -c "${p}"
+		xx_ ./update project build -c "${p}"
 	done
-	x_ ./update project build -c bios_extract flashrom grub uefitool \
-	    util-fw/stm32-vserprog util-fw/stm32-vserprog/libopencm3 \
-	    memtest86plus/build32 memtest86plus/build64 util/*
+	xx_ ./update project build -c bios_extract flashrom grub uefitool \
+	    stm32-vserprog stm32-vserprog/libopencm3 util/* memtest86plus
 
-	x_ rm -Rf .git* */.git* */*/.git* */*/*/.git* */*/*/*/.git* \
-	    */*/*/*/*/.git* */*/*/*/*/*/.git* */*/*/*/*/*/*/.git*
-	x_ rm -Rf cbutils elf util-fw/rp2040/pico-serprog/build
+	xx_ rm -Rf .git */.git* */*/.git* */*/*/.git* */*/*/*/.git* \
+	    */*/*/*/*/.git* */*/*/*/*/*/.git* */*/*/*/*/*/*/.git* \
+	    */*/*/*/*/*/*/*/.git*
+	xx_ rm -Rf cbutils elf src/pico-serprog/build
 	)
 }
 
 create_release_archive()
 {
 	(
-	x_ cd "${reldir}/"
-	x_ tar -c "${dirname}/" | xz -T0 -9e >"${dirname}.tar.xz"
-	x_ rm -Rf "${dirname}/"
+	xx_ cd "${reldir}/"
+	xx_ tar -c "${dirname}/" | xz -T0 -9e >"${dirname}.tar.xz"
+	xx_ rm -Rf "${dirname}/"
 	)
 }
 
+fail()
+{
+	[ -z ${srcdir} ] || rm -Rf "${srcdir}" 1>/dev/null 2>/dev/null || :
+	fail "${1}"
+}
+
 main $@