summaryrefslogtreecommitdiff
path: root/script/build
diff options
context:
space:
mode:
authorLeah Rowe <leah@libreboot.org>2023-08-31 21:12:35 +0100
committerLeah Rowe <leah@libreboot.org>2023-08-31 21:12:35 +0100
commitbf774acf1df0e3a8743eb5d55dd47fc8957ff41a (patch)
treecde11029238705152ef85cff52f8050fb8c31b89 /script/build
parente5546128eab02a503176a9bf93c1b88d83f3b655 (diff)
move build/boot/rom moverom to handle/make/config
most of these steps do not need to be repeated, per image. move it into handle/make/config, so that the steps are performed on files that go under elf/coreboot (this will save on build time). the logic for handling 4MB ROM images on sandy/ivy was unused, and has been removed. Signed-off-by: Leah Rowe <leah@libreboot.org>
Diffstat (limited to 'script/build')
-rwxr-xr-xscript/build/boot/roms_helper71
1 files changed, 7 insertions, 64 deletions
diff --git a/script/build/boot/roms_helper b/script/build/boot/roms_helper
index 64de5843..bd94a4b8 100755
--- a/script/build/boot/roms_helper
+++ b/script/build/boot/roms_helper
@@ -44,7 +44,6 @@ keyboard_layouts=""
grub_scan_disk="undefined"
tree="undefined"
-romtype="normal" # optional parameter in target.cfg. "normal" is default
arch="undefined"
# Disable all payloads by default.
@@ -332,7 +331,7 @@ build_seabios_roms()
newrompath="${newrompath}${displaymode}.rom"
fi
- moverom "${t}" "${newrompath}" "${romtype}" || \
+ moverom "${t}" "${newrompath}" || \
err "build_roms: cannot copy rom"
rm -f "${t}" || err "cannot rm ${t}"
fi
@@ -418,7 +417,7 @@ build_grub_roms() {
newrompath="${newrompath}${initmode}_${displaymode}_"
newrompath="${newrompath}${keymap}.rom"
fi
- moverom "${tmpgrubrom}" "${newrompath}" "${romtype}" || \
+ moverom "${tmpgrubrom}" "${newrompath}" || \
err "build_grub_roms, moverom"
rm -f "${tmpgrubrom}" || err "rm tmpgrubrom, build_grub_roms"
done
@@ -494,7 +493,7 @@ build_uboot_roms()
newrompath="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom"
[ "${initmode}" = "normal" ] && \
newrompath="${romdir}/uboot_payload_${board}_${initmode}.rom"
- moverom "${tmprom}" "${newrompath}" "${romtype}" || \
+ moverom "${tmprom}" "${newrompath}" || \
err "build_roms: moverom fail (u-boot)"
rm -f "${tmprom}" || \
err "build_roms: cannot rm u-boot rom"
@@ -529,68 +528,14 @@ mkUbootRom() {
# it is assumed that no other work will be done on the ROM
# after calling this function. therefore this function is "final"
moverom() {
- rompath="$1"
- newrompath="$2"
- cuttype="$3"
-
+ rompath="${1}"
+ newrompath="${2}"
[ "${blobs_required}" = "n" ] && \
newrompath="${newrompath%.rom}_noblobs.rom"
printf "\nCreating new ROM image: %s\n" "${newrompath}"
- if [ "${cuttype}" = "4MiB IFD BIOS region" ]; then
- dd if="${rompath}" of="${newrompath}" bs=1 \
- skip=$(($(stat -c %s "${rompath}") - 0x400000)) \
- count=4194304 || err "moverom: cannot cut 4MB section"
- else
- cp "${rompath}" "${newrompath}" || \
- err "moverom: can't copy rom"
- fi
-
- # pike2008 cards cause a system hang when loading option roms in seabios
- # if there is an empty option rom in cbfs, no option rom will be loaded
- if [ "${cuttype}" = "d8d16sas" ]; then
- emptyrom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
- rm -f "${emptyrom}" || err "cannot remove fake oprom"
- touch "${emptyrom}" || err "cannot create fake oprom"
- for deviceID in "0072" "3050"; do
- "${cbfstool}" "${newrompath}" add -f "${emptyrom}" \
- -n "pci1000,${deviceID}.rom" -t raw || \
- err "moverom: cannot insert fake pike2008 rom"
- done
- rm -f "${emptyrom}" || \
- err "moverom: cannot remove pike2008 rom"
- fi
-
- for romsize in 4 8 16; do
- ifddir="descriptors/ich9m"
- for bs in "4" "12"; do
- ifdgbe="${ifddir}/ich9fdnogbe_${romsize}m.bin"
- cmpstr="${romsize}MiB ICH9 IFD NOGBE NOR flash"
- if [ "${bs}" = "12" ]; then
- cmpstr="${romsize}MiB ICH9 IFD NOR flash"
- ifdgbe="${ifddir}/ich9fdgbe_${romsize}m.bin"
- fi
- [ "${cuttype}" = "${cmpstr}" ] || continue
- [ -f "${ifdgbe}" ] || ./build descriptors ich9m || \
- err "moverom: cannot create ich9m ifd"
- dd if="${ifdgbe}" of="${newrompath}" bs=${bs}k count=1 \
- conv=notrunc || err "moverom: cant insert ich9m ifd"
- done
-
- done
-
- if [ "${cuttype}" = "i945 laptop" ]; then
- dd if="${newrompath}" of=top64k.bin bs=1 \
- skip=$(($(stat -c %s "${newrompath}") - 0x10000)) \
- count=64k || \
- err "moverom: cannot copy boot block from i945 rom"
- dd if=top64k.bin of="${newrompath}" bs=1 \
- seek=$(($(stat -c %s "${newrompath}") - 0x20000)) \
- count=64k conv=notrunc || \
- err "moverom: cannot copy boot block into i945 rom"
- rm -f top64k.bin || err "moverom: can't remove top64k.bin"
- fi
+ cp "${rompath}" "${newrompath}" || err "moverom: can't copy rom"
if [ "${microcode_required}" = "n" ]; then
_newrom_b="${newrompath%.rom}_nomicrocode.rom"
@@ -598,10 +543,8 @@ moverom() {
err "moverom: cp \"${newrompath}\" \"${_newrom_b}\""
microcode_present="y"
"${cbfstool}" "${_newrom_b}" remove -n \
- cpu_microcode_blob.bin || microcode_present="n"
+ cpu_microcode_blob.bin 2>/dev/null || microcode_present="n"
if [ "${microcode_present}" = "n" ]; then
- rm -f "${_newrom_b}" || \
- err "cannot remove ${_newrom_b}"
printf "REMARK: '%s' already lacks microcode\n" \
"${newrompath}"
printf "Renaming default ROM file instead.\n"